When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Faulty Graphic Card
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Display driver stopped responding and has recovered error [SOLVED]
Maak seker dat jy 'n herstelpunt skep vir ingeval iets verkeerd gaan.
Metode 1: Verwyder die grafiese kaartbestuurder
1. Right-click on your NVIDIA graphic card under device manager and select Verwyder.
2. If asked for confirmation, select Yes.
3. Druk Windows-sleutel + X en kies dan Beheer paneel.
4. From Control Panel, click on Deïnstalleer 'n program.
5. Volgende, verwyder alles wat met Nvidia verband hou.
6. Reboot your system to save changes and laai weer die opstelling af vanaf die vervaardiger se webwerf.
5. Once you are sure that you have removed everything, probeer om die drywers weer te installeer. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Druk Windows-sleutel + R en tik dan devmgmt.msc en druk enter om Toestelbestuurder oop te maak.
2. Brei dan uit Wys adapters en regskliek op jou Nvidia-grafiese kaart en kies Moontlik te maak.
3. Once, you have done this again, right-click on your graphic card and select “Dateer bestuurdersagteware op."
4. Kies “Soek outomaties vir opgedateerde bestuursprogrammatuur” en laat dit die proses voltooi.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Dateer Bestuurder Sagteware op” maar hierdie keer op die volgende skerm kies “Blaai deur my rekenaar vir bestuurder sagteware."
7. Now. select "Laat my kies uit 'n lys van toestelbestuurders op my rekenaar. "
8. Finally, select the compatible driver from your Nvidia grafiese kaart list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Eienskappe.
2. Then click Gevorderde stelselinstellings vanaf die linkerkantste kieslys.
let wel: You could also directly open Advanced system settings by pressing Windows Key + R then type Sysdm.cpl en druk Enter.
3. Skakel oor na Gevorderde oortjie if not already there and click Settings under Optrede.
4. Now select the checkbox which says “Pas aan vir die beste prestasie."
5. Klik Toepas, gevolg deur OK.
6. Herlaai jou rekenaar om veranderinge te stoor.
Method 4: Increase GPU processing time (Registry Fix)
1. Druk Windows-sleutel + R en tik dan regedit en druk Enter om Registerredigeerder oop te maak.
2. Navigeer na die volgende registersleutel:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click Nuut and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
For 32-bit Windows:
a. Kies DWORD (32-bis) Waarde en tik TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
For 64-bit Windows:
a. Kies QWORD (64-bit) Value en tik TdrDelay as the Name.
b. Double click on TdrDelay and betree 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer vanaf Microsoft se amptelike webwerf.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Aanbeveel:
Dit is dit wat jy suksesvol het Fix Display driver stopped responding and has recovered error [SOLVED] maar as jy nog enige vrae oor hierdie pos het, vra dit dan gerus in die kommentaarafdeling.