When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Verouderde bedryfstelsel.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikoon.
2. If the status is set to Nie gekonnekteer nie, klik op die Network globe icon, choose your Wi-Fi network and click on Skakel in button. Make sure Vlugmodus is nie aangeskakel nie.
3. If you again face the same network connection error code, then click on the Ontkoppel button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Regsklik op die Wi-Fi-ikoon en kies Open Network & Internet settings.
6. Kliek op Wi-Fi.
7. Scroll down the right menu, click on Bestuur bekende netwerke.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Vergeet.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metode 2: Herbegin router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
let wel: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Soek die Krag knoppie aan die agterkant van jou router.
2. Druk die knoppie een keer om sit dit af.
3. Nou, ontkoppel jou Router kragkabel en wag totdat die krag heeltemal uit die kapasitors gedreineer is.
4. Dan, bande die kragkabel en skakel dit na 'n minuut aan.
5. Wag totdat die netwerkverbinding weer ingestel is en probeer weer aanmeld.
Lees ook: Fix Computers Not Showing Up on Network in Windows 10
Metode 3: Begin die netwerkprobleemoplosser
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Klik op die Windows sleutel en tik Probleemopstelling van instellings in die soekbalk en Oop.
2. Kliek op Bykomende probleemoplossers.
3. Kies Network Adapter en klik op Begin die probleemoplosser.
4. Select the network adapter to diagnose en klik op volgende.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliek op Maak die probleemoplosser toe.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lees ook: Herstel Familiedeel YouTube TV werk nie
Metode 4: Herstel stelsellêers
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Stelsel Lêer Checker) /DISM (Deployment Image Servicing and Management) utilities on your Windows 10 PC.
1. Klik op die Windows sleutel, tik Command Prompt en klik op Begin as administrateur.
2. Kliek op Ja in die Gebruikers Toegang vinnige.
3. tipe chkdsk C: / f / r / x bevel en slaan Tik sleutel in.
4. As jy met 'n boodskap gevra word, Chkdsk kan nie loop nie ... die volume is ... in gebruik proses, tik dan Y en druk die Tik sleutel in.
5. Tik weer die opdrag: sfc / scannow en druk Tik sleutel in om die Stelsel Lêer Checker skandeer.
let wel: 'n Stelselskandering sal begin word en dit sal 'n paar minute neem om te voltooi. Intussen kan jy voortgaan om ander aktiwiteite uit te voer, maar wees bedag daarop om nie per ongeluk die venster toe te maak nie.
Nadat die skandering voltooi is, sal dit een van hierdie boodskappe wys:
- Windows Resource Protection het geen integriteitskendings gevind nie.
- Windows Resource Protection kon nie die versoekte bewerking uitvoer nie.
- Windows Resource Protection het korrupte lêers gevind en dit suksesvol herstel.
- Windows Resource Protection het korrupte lêers gevind, maar kon sommige van hulle nie regmaak nie.
6. Sodra die skandering voltooi is, herlaai u rekenaar.
7. Weereens, begin Command Prompt as administrateur en voer die gegewe opdragte een na die ander uit:
dism.exe /Aanlyn /skoonmaakbeeld /scanhealth dism.exe /Aanlyn /skoonmaakbeeld /restorehealth dism.exe /Aanlyn /skoonmaakbeeld /startcomponentcleanup
let wel: Jy moet 'n werkende internetverbinding hê om DISM-opdragte behoorlik uit te voer.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Klik op die Windows sleutel en tik Toestelbestuurder in the Windows search menu. Click on Opening.
2. Brei die Netwerkadapters afdeling deur daarop te dubbelklik.
3. Regskliek op jou Netwerk bestuurder (byvoorbeeld, Intel (R) Dual Band Wireless-AC 3168) en kies die Skakel toestel uit opsie.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktiveer toestel opsie.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lees ook: Fix Windows could not automatically detect this Network’s Proxy settings
Metode 6: Stel ipconfig terug
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Gaan na die soekkieslys en tik cmd. Klik op Begin as administrateur.
2. Tik die volgende bevele en druk die Tik sleutel in.
netsh Winsock herstel netsh int IP herstel ipconfig / release ipconfig / renew
3. Wag vir die opdragte om uitgevoer te word en herlaai u rekenaar.
Metode 7: Spoel DNS-kas uit
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Begin Command Prompt by searching in the Windows spyskaart and click on Run as administrator.
2. tipe ipconfig / flushdns in the command window and hit Tik.
Lees ook: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Begin die Run dialoogkassie deur te druk Windows + R-sleutels saam.
2. tipe ncpa.cpl en druk Tik sleutel in.
3. Right-click on your active netwerkadapter en klik op Eiendomme.
4. Ontmerk die vinkie Internetprotokol weergawe 6 (TCP / IPv6) opsie.
5. Ten slotte, klik op OK om die veranderinge te stoor en te kyk of die probleem opgelos is.
let wel: If you use multiple network connections, navigate to Netwerk Sentrum en Verander adapter settings. Right-click on the adapter and select Skakel. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. tipe Toestelbestuurder in the Windows search menu and click Opening.
2. Dubbelklik op die Netwerkadapters om dit uit te brei.
3. Regskliek op jou bestuurder (bv Intel (R) Dual Band Wireless-AC 3168) en klik Dateer bestuurder op.
4. Kliek op Soek deur bestuurders na my rekenaar to locate and install a driver manually.
5. Klik op die Browser button to choose any directory and click on volgende.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Die beste drywers vir jou toestel is reeds geïnstalleer.
6. Kliek op Sluiting om by die venster uit te gaan.
7. herlaai the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Begin Toestelbestuurder from the Windows search menu.
2. Regsklik op die bestuurder en kies Verwyder toestel.
3. A warning prompt will be displayed on the screen. Check the box “Verwyder die stuurprogrammatuur vir hierdie toestel” en bevestig die versoek deur te klik Verwyder.
4. Laai die drywers op jou toestel af en installeer dit deur 'n handmatige opdatering of outomatiese opdatering.
5. Besoek die vervaardiger se webwerf.
2. Vind en Aflaai the drivers corresponding to the Windows version on your PC.
3. Sodra dit afgelaai is, dubbelklik op die afgelaaide lêer and follow the given instructions to install it.
Lees ook: Hoe om 'n VPN op te stel op Windows 10
Metode 10: Dateer Windows op
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Druk die Windows + ek sleutels saam om oop te maak Stellings Op jou rekenaar.
2. Kies Opdatering en sekuriteit.
3. Kies Kyk vir opdaterings.
4A. Click Installeer nou to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Jy is op datum boodskap.
Metode 11: Verwyder onlangse opdaterings
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Druk en hou Windows + R-sleutels saam om die oop te maak Run dialoog boks.
2. tipe appwiz.cpl en druk Tik.
3. Kliek op Bekyk geïnstalleerde opdaterings.
4. Select the most recent update and click on Verwyder.
5. Confirm the prompt, if any, and herlaai die rekenaar.
Lees ook: Hoe om Firefox reg te stel wat nie bladsye laai nie
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the netwerk adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
let wel: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Stellings dan System en Oor. Once you have reset your network, you have to reinstall all networking software soos VPN-kliënte or Virtuele skakelaars.
1. Druk en hou Windows + I sleutels saam om oop te maak Windows-instellings.
2. Kliek op Netwerk en internet.
3. Kliek op Netwerkterugstelling vir Status.
4. Bevestig die versoek deur op te klik Herstel nou.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Aanbeveel:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.