Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Maak seker dat jy 'n herstelpunt skep vir ingeval iets verkeerd gaan.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
let wel: Backup the registry just in case something goes wrong.
1. Druk Windows-sleutel + R en tik dan regedit en druk Enter om Registerredigeerder oop te maak.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.Maak seker om te kies {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find UpperFilters en LowerFilters.
4. Regskliek op elkeen van hulle en kies Verwyder.
5. Herlaai jou rekenaar om veranderinge te stoor.
Metode 2: Begin Stelselherstel
1. Druk Windows-sleutel + R en tik”Sysdm.cpl” druk dan enter.
2.Kies Stelselbeskerming blad en kies Stelsel te herstel.
3. Klik op Volgende en kies die gewenste Stelselherstelpunt.
4.Volg die instruksie op die skerm om stelselherstel te voltooi. En kyk of jy in staat is Fix USB Error Code 52 Windows cannot verify the digital signature, indien nie, gaan dan voort met die onderstaande metodes.
Method 3: Disable Secure Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
3. Herbegin jou rekenaar en kyk of jy kan Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on Krag knoppie then hold Skuif en klik op herlaai (while holding the shift button).
2.Maak seker dat jy nie die Shift-knoppie los totdat jy die Gevorderde herstelopsies-kieslys.
3. Gaan nou na die volgende in die menu Gevorderde herstelopsies:
Foutspoor > Gevorderde opsies > Opstartinstellings > Herbegin
4. Sodra jy herbegin klik, sal jou rekenaar herbegin en jy sal 'n blou skerm met 'n lys opsies sien, maak seker dat jy die nommersleutel langs die opsie druk wat sê "Deaktiveer die handtekening van die bestuurder."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc en druk Enter om Toestelbestuurder oop te maak.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Dateer bestuurder op.
7. Kies “Soek outomaties na opgedateerde bestuurdersagteware."
8.Repeat the above process for every problematic device listed in Device Manager.
9. Herlaai jou rekenaar om veranderinge te stoor en te kyk of jy dit kan doen Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1. Druk Windows-sleutel + R en tik dan devmgmt.msc en druk Enter.
2.Regsklik op each of problematic device (yellow exclamation mark next to it) and select Verwyder.
3.Click Yes/OK to continue with uninstallation.
4. Herlaai jou rekenaar om veranderinge te stoor.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys lêers na usbehciold.sys & usbhubold.sys.
3. Druk Windows-sleutel + R en tik dan devmgmt.msc en druk Enter.
4. Brei uit Universal Serial Bus Controllers en klik dan regs op Standard Enhanced PCI to USB Host Controller en kies Verwyder.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2. Tik nou die volgende in die cmd en druk enter:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:windows
3.Wag vir die bogenoemde proses om te voltooi en sodra dit klaar is, herbegin jou rekenaar.
4.Volgende, hardloop CHKDSK van hier af Los lêerstelselfoute op met Check Disk Utility (CHKDSK).
5.Laat die bogenoemde proses voltooi en herlaai jou rekenaar weer om veranderinge te stoor.
Kyk of jy kan Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1. Druk Windows-sleutel + X en kies dan Command Prompt (Admin).
2.Tik die volgende opdrag in cmd en druk Enter na elkeen:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit /deletevalue loadoptions
bcdedit -set TOETSIGNING OFF
4. Herlaai jou rekenaar om veranderinge te stoor.
Aanbeveel vir jou:
Dit is dit wat jy suksesvol het Fix USB Error Code 52 Windows cannot verify the digital signature maar as jy nog enige vrae het oor hierdie gids, vra dit gerus in die kommentaarafdeling.