If you face this error message “Fix Selected boot image did not authenticate”, then your PC cannot load BIOS properly, and the main cause of this error seems to be Secure Boot. The boot sequence is saved into the database, and a violation of it seems to lead to this error message. This error can also be caused due to corrupted or incorrect BCD (Boot Configuration Data) configuration.
If you click OK, the PC will restart, and you will again be back on this error message. So without wasting any time let’s see how to actually Fix Selected boot image did not authenticate error with the help of below-listed troubleshooting guide.
[FIXED] Selected boot image did not authenticate error
Method 1: Switch to Legacy Boot in BIOS
1. Boot into BIOS, when the computer starts repeatedly press F10 or DEL to enter into BIOS-opstelling.
2. Now get into Stelselkonfigurasie then find Legacy Support.
3. Enable Legacy support using the arrow keys and pressing Enter.
4. Then make sure Secure boot is disabled, if not then disable it.
5. Save changes and exit BIOS.
6. Reboot your PC and see if you can Fix Selected boot image did not authenticate error, indien nie, gaan dan voort.
Method 2: Perform Hard Reset
1. Turn off your PC completely and remove the power cord.
2. Verwyder die battery from the back of your PC.
3. Hold the power button for 20-30 seconds to perform a hard reset.
4. Again put your battery and connect the AC power cord.
5. Restart your PC and see if you’re able to fix the issue.
Method 3: Load Default BIOS Configuration
1. Skakel jou skootrekenaar af, skakel dit dan aan en gelyktydig druk F2, DEL of F12 (afhangende van jou vervaardiger) om aan te gaan BIOS-opstelling.
2. Now you’ll need to find the reset option to load the default configuration, and it may be named Reset to default, Load factory defaults, Clear BIOS settings, Load setup defaults, or something similar.
3. Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS sal nou sy gebruik oorspronklike stellings.
4. Once you’re logged into Windows see if the issue with the charging is resolved or not.
Metode 4: Begin outomatiese herstel
1. Insert the Windows 10 bootable installation DVD en herbegin jou rekenaar.
2. When prompted to druk enige sleutel to boot from CD or DVD, press any key to continue.
3. Kies jou taalvoorkeure en klik Volgende. Klik op Herstel jou rekenaar links onder.
4. Op kies 'n opsie skerm, klik Probleme met.
5. Op die Foutspoor skerm, klik die Gevorderde opsie.
6. Op die Gevorderde opsies skerm, klik Outomatiese herstel of opstartherstel.
7. Wait till the Windows outomatiese/opstartherstelwerk volledige.
8. Herbegin en jy het suksesvol Fix Selected boot image did not authenticate error, if not, continue.
Lees ook: Hoe om te herstel outomatiese herstel kon nie jou rekenaar herstel nie.
Method 5: Run Hardware Diagnostics
As jy nog steeds nie kan nie Fix Selected boot image did not authenticate error, then chances are your hard disk might be failing. In this case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace the Hard Disk or not. But instead of hard disk, any other hardware might also be failing such as memory or notebook panel etc.
Om Diagnostics te laat loop, herbegin jou rekenaar en as die rekenaar begin (voor die selflaaiskerm), druk F12 sleutel. Wanneer die Boot-kieslys verskyn, merk die Boot to Utility Partition-opsie of die Diagnostics-opsie, druk enter om die Diagnostics te begin. Dit sal outomaties al die hardeware van jou stelsel nagaan en sal terugrapporteer indien enige probleem gevind word.
Aanbeveel:
Dit is dit wat jy suksesvol het Fix Selected boot image did not authenticate error if you still have any questions regarding this post then feel free to ask them in the comment’s section.