Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Herlaai en kies behoorlike selflaaitoestelprobleem [OPGELOS]
Metode 1: Stel die korrekte opstartvolgorde in
Jy sien dalk die fout "Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Wanneer jou rekenaar begin (Voor die selflaaiskerm of die foutskerm), druk herhaaldelik Delete of F1 of F2 sleutel (Afhangende van jou rekenaar se vervaardiger) om voer BIOS-opstelling in.
2.Sodra jy in BIOS-opstelling is, kies Boot-oortjie uit die lys opsies.
3. Maak nou seker dat die rekenaar Hardeskyf of SSD is as 'n topprioriteit in die opstartvolgorde gestel. Indien nie, gebruik dan die op- of afpyltjiesleutels om die hardeskyf bo-aan te stel, wat beteken dat die rekenaar eers daaruit sal begin eerder as enige ander bron.
4. Laastens, druk F10 om hierdie verandering te stoor en af te sluit. Dit moet hê Fix Reboot and Select Proper Boot Device Issue, indien nie, gaan dan voort.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Om Diagnostics uit te voer herbegin jou rekenaar en soos die rekenaar begin (voor die selflaaiskerm), druk F12 sleutel en wanneer die Boot menu verskyn, merk die Boot to Utility Partition opsie of die Diagnostics opsie en druk enter om die Diagnostics te begin. Dit sal outomaties al die hardeware van jou stelsel nagaan en sal terugrapporteer indien enige probleem gevind word.
Aanbeveel: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Belangrik: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Voeg die Windows 10 selflaaibare installasie DVD in en herbegin jou rekenaar.
2. Wanneer jy gevra word om enige sleutel te druk om vanaf CD of DVD te begin, druk enige sleutel om voort te gaan.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Herbegin en jy het suksesvol Fix Reboot and Select Proper Boot Device issue, indien nie, gaan voort.
Lees ook Hoe om te herstel outomatiese herstel kon nie jou rekenaar herstel nie.
Method 5: Enable UEFI Boot
1. Herbegin jou rekenaar en tik F2 of DEL afhangende van jou rekenaar om Boot Setup oop te maak.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Metode 6: Verander die aktiewe partisie in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
let wel: Merk altyd die System Reserve Partition (gewoonlik 100mb) aktief en as jy nie 'n System Reserved Partition het nie, merk C: Drive as die aktiewe partisie.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metode 7: Herstel Installeer Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Dit is dit wat jy suksesvol het Fix Reboot and Select proper Boot device issue maar as jy nog enige navrae oor hierdie pos het, vra dit gerus in die kommentaar afdeling.