Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
የሆነ ችግር ከተፈጠረ ልክ የመልሶ ማግኛ ነጥብ መፍጠርዎን ያረጋግጡ።
ዘዴ 1፡ ለጊዜው ጸረ-ቫይረስ እና ፋየርዎልን አሰናክል
በ ላይ 1. ቀኝ-ጠቅ ያድርጉ የጸረ-ቫይረስ ፕሮግራም አዶ ከስርዓት ትሪ እና ይምረጡ አሰናክል.
2.በመቀጠል, የትኛውን የጊዜ ገደብ ይምረጡ ጸረ-ቫይረስ እንደተሰናከለ ይቆያል።
ማሳሰቢያ፡ የሚቻለውን ትንሹን ጊዜ ለምሳሌ 15 ደቂቃ ወይም 30 ደቂቃ ይምረጡ።
3.Once done, again check if the error resolves or not.
4. ዊንዶውስ ቁልፍን + እኔ ን ይጫኑ እና ከዚያ ይምረጡ መቆጣጠሪያ ሰሌዳ.
5.በመቀጠል ላይ ጠቅ ያድርጉ ስርዓት እና ደህንነት.
6.ከዚያ ይንኩ። ዊንዶውስ ፋየርዎል.
7.አሁን በግራ መስኮት መቃን ዊንዶውስ ፋየርዎልን አብራ ወይም አጥፋ የሚለውን ይንኩ።
8.ዊንዶውስ ፋየርዎልን ያጥፉ እና ፒሲዎን እንደገና ያስጀምሩ። And see if you’re able to Fix Error code 0x80070035 The network path was not found.
ከላይ ያለው ዘዴ የማይሰራ ከሆነ ፋየርዎልን እንደገና ለማብራት ተመሳሳይ እርምጃዎችን መከተልዎን ያረጋግጡ።
Method 2: Delete Hidden Network Adapters
1. ዊንዶውስ ቁልፍ + R ን ይጫኑ ከዚያም ይተይቡ devmgmt.msc እና ለመክፈት Enter ን ይምቱ እቃ አስተዳደር.
2.አሁን ይምረጡ የአውታረመረብ ማስተካከያዎች ከዚያም ይህንን ይጫኑ የተደበቁ መሣሪያዎችን አሳይ> አሳይ።
3.Right-click on each of the hidden devices and select መሣሪያን ማራገፍ።
4.Do this for all the hidden devices listed under Network Adapters.
ለውጦችን ለማስቀመጥ ፒሲዎን እንደገና ያስነሱ 5.
Method 3: Turn ON Network Discovery
1. ዊንዶውስ ቁልፍ + X ን ይጫኑ ከዚያ ይምረጡ መቆጣጠሪያ ሰሌዳ.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings ከግራ-እጅ ምናሌ.
4.Check mark የአውታረ መረብ ግኝትን ያብሩ and click Save changes.
ለውጦችን ለማስቀመጥ እና መቻልዎን ለማየት ፒሲዎን እንደገና ያስነሱ 5 Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. ዊንዶውስ ቁልፍ + R ን ይጫኑ ከዚያም ይተይቡ ncpa.cpl እና ኢትን ጠቅ ያድርጉ.
2.Right-click on your active Wi-Fi or ethernet connection and select ንብረቶች.
3.Select የበይነመረብ ፕሮቶኮል ስሪት 4 (TCP / IPv4) እና ባህሪያትን ጠቅ ያድርጉ.
4.አሁን ጠቅ ያድርጉ የላቀ in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “NetBIOS በ TCP / IP ላይ አንቃ“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. ዊንዶውስ ቁልፍ + X ን ይጫኑ ከዚያ ይምረጡ መቆጣጠሪያ ሰሌዳ.
2. ዓይነት ምስክርነት in the control panel search and click on የብቃት ማረጋገጫ ሥራ አስኪያጅ።
3.Select የዊንዶውስ ምስክርነቶች እና ከዚያ ጠቅ ያድርጉ Add a Windows credential.
4.One by one type the የተጠቃሚ ስም እና የይለፍ ቃል of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select ንብረቶች.
2. ቀይር ወደ ትር በማጋራት ላይ and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “ይህንን አቃፊ አጋራ” and make sure the Share name is correct.
4. አፕሊኬሽን ጠቅ ያድርጉ እና እሺን ይከተሉ።
Method 7: Change Network Security settings
1. ዊንዶውስ ቁልፍ + R ን ይጫኑ ከዚያም ይተይቡ secpol.msc እና ኢትን ጠቅ ያድርጉ.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Double click on የአውታረ መረብ ደህንነት፡ የ LAN አስተዳዳሪ የማረጋገጫ ደረጃ in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. አፕሊኬሽን ጠቅ ያድርጉ እና እሺን ይከተሉ።
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
ዘዴ 8: TCP / IP ን ዳግም ያስጀምሩ
1.Right-click on Windows Button and select “የትእዛዝ ጥያቄ (አስተዳዳሪ)።"
2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip ip-reset
- netsh winsock ዳግም አስጀምር
ለውጦችን ለመተግበር 4. ዳግም አስነሳ.
ለእርስዎ የተመከሩ
ያ ነው በተሳካ ሁኔታ ያለህ Fix Error code 0x80070035 The network path was not found ግን አሁንም ይህንን ልጥፍ በተመለከተ ማንኛቸውም ጥያቄዎች ካሉዎት በአስተያየቱ ክፍል ውስጥ እነሱን ለመጠየቅ ነፃነት ይሰማዎ።