When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- ጊዜው ያለፈበት ስርዓተ ክወና.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe አዶ.
2. If the status is set to አልተገናኘምላይ ጠቅ ያድርጉ Network globe icon, choose your Wi-Fi network and click on ይገናኙ button. Make sure የአውሮፕላን ሁኔታ አልተበራም ፡፡
3. If you again face the same network connection error code, then click on the ግንኙነት አቋርጥ button, wait for some time and reconnect it again.
4. Try connecting to a different ዋይፋይ network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. በ ላይ በቀኝ ጠቅ ያድርጉ የ Wi-Fi አዶ እና ይምረጡ Open Network & Internet settings.
6. ላይ ጠቅ ያድርጉ ዋይፋይ.
7. Scroll down the right menu, click on የተገናኙ አውታረ መረቦችን ያቀናብሩ.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select እርሳ ፡፡
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
ዘዴ 2: ራውተርን እንደገና ያስጀምሩ
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
ማስታወሻ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. ፈልግ የኃይል አዝራር በራውተርዎ ጀርባ ላይ።
2. አንድ ጊዜ ለማድረግ አዝራሩን ይጫኑ አጥፋው ፡፡
3. አሁን ፣ አለያይ ያንተ Router power cable እና ኃይሉ ሙሉ በሙሉ ከ capacitors እስኪፈስ ድረስ ይጠብቁ.
4. ከዚያ ፣ ዳግም ይገናኙ የ የኃይል ገመድ እና ከአንድ ደቂቃ በኋላ ያብሩት.
5. የአውታረ መረብ ግንኙነቱ እንደገና እስኪቋቋም ድረስ ይጠብቁ እና እንደገና ለመግባት ይሞክሩ.
እንዲሁም ይህን አንብብ: Fix Computers Not Showing Up on Network in Windows 10
ዘዴ 3: የአውታረ መረብ መላ መፈለጊያ አሂድ
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ን ይምቱ የዊንዶውስ ቁልፍ እና ይተይቡ መላ ፍለጋ ቅንብሮች በፍለጋ አሞሌ ውስጥ እና ክፈት.
2. ላይ ጠቅ ያድርጉ ተጨማሪ መላ ፈላጊዎች.
3. ይምረጡ የአውታረመረብ አስማሚ እና ጠቅ ያድርጉ መላ መፈለጊያውን አሂድ.
4. Select the network adapter to diagnose እና ጠቅ ያድርጉ ቀጣይ.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problemላይ ጠቅ ያድርጉ መላ ፈላጊውን ዝጋ.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
እንዲሁም ይህን አንብብ: የቤተሰብ ማጋራት YouTube ቲቪ አይሰራም
ዘዴ 4: የስርዓት ፋይሎችን መጠገን
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (የስርዓት ፋይል ፈታሽ) /DISM (የማሰማራት ምስል አገልግሎት እና አስተዳደር) utilities on your Windows 10 PC.
1. ን ይምቱ የዊንዶውስ ቁልፍ, ይተይቡ ትዕዛዝ መስጫ እና ጠቅ ያድርጉ እንደ አስተዳዳሪ ያሂዱ.
2. ላይ ጠቅ ያድርጉ አዎ በውስጡ የተጠቃሚ መለያ ቁጥጥር ጥያቄ.
3. ይተይቡ chkdsk C: / f / r / x ማዘዝ እና መምታት ቁልፍ ያስገቡ.
4. በመልእክት ከተጠየቁ። Chkdsk ማሄድ አይችልም…ድምጹ… በአገልግሎት ላይ ነው።, ከዚያም, ይተይቡ Y እና ይምቱ ቁልፍ ያስገቡ.
5. እንደገና ትዕዛዙን ይተይቡ፡- sfc / scannow እና ይጫኑ ቁልፍ ያስገቡ ለማሄድ የስርዓት ፋይል ፈታሽ ቃኝ።
ማስታወሻ: የስርዓት ቅኝት ይጀመራል እና ለመጨረስ ሁለት ደቂቃዎችን ይወስዳል። ይህ በእንዲህ እንዳለ, ሌሎች እንቅስቃሴዎችን ማከናወን መቀጠል ይችላሉ ነገር ግን በድንገት መስኮቱን ላለመዝጋት ይጠንቀቁ.
ፍተሻውን ካጠናቀቀ በኋላ ከሚከተሉት መልዕክቶች ውስጥ አንዱን ያሳያል፡-
- የዊንዶውስ ሃብት ጥበቃ ምንም ዓይነት የአቋም መጣስ አላገኘም።
- የዊንዶውስ ሪሶርስ ጥበቃ የተጠየቀውን ስራ ማከናወን አልቻለም።
- የዊንዶውስ ሪሶርስ ጥበቃ የተበላሹ ፋይሎችን አግኝቶ በተሳካ ሁኔታ ጠግኗል።
- የዊንዶውስ ሪሶርስ ጥበቃ የተበላሹ ፋይሎችን አግኝቷል ነገር ግን አንዳንዶቹን ማስተካከል አልቻለም።
6. ፍተሻው እንደተጠናቀቀ, እንደገና ጀምር የእርስዎ ፒሲ.
7. እንደገና, አስነሳ Command Prompt እንደ አስተዳዳሪ እና የተሰጡትን ትእዛዛት አንድ በአንድ ያስፈጽሙ።
dism.exe / ኦንላይን / የጽዳት-ምስል / ስካን ጤና dism.exe / ኦንላይን / የጽዳት-ምስል / ወደነበረበት መመለስ dism.exe / ኦንላይን / ማጽጃ-ምስል / startcomponentcleanup
ማስታወሻ: የ DISM ትዕዛዞችን በትክክል ለማስፈጸም የሚሰራ የበይነመረብ ግንኙነት ሊኖርህ ይገባል።
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ን ይምቱ የዊንዶውስ ቁልፍ እና ይተይቡ እቃ አስተዳደር in the Windows search menu. Click on ክፈት.
2. ዘርጋ የአውታረ መረብ ማስተካከያዎች በእሱ ላይ ሁለት ጊዜ ጠቅ በማድረግ ክፍል.
3. በቀኝ መዳፊት አዝራሩ ላይ ጠቅ ያድርጉ የአውታረ መረብ ሾፌር (ለምሳሌ, Intel (R) Dual Band Wireless-AC 3168) እና ይምረጡ መሣሪያን አሰናክል አማራጭ.
4. Confirm the below prompt by clicking on አዎ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the መሣሪያ አንቃ አማራጭ.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
እንዲሁም ይህን አንብብ: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. ወደ ፍለጋው ምናሌ ይሂዱ እና ይተይቡ cmd. ላይ ጠቅ ያድርጉ እንደ አስተዳዳሪ ያሂዱ.
2. የሚከተለውን ይተይቡ ትዕዛዞች እና ይምቱ ቁልፍ ያስገቡ.
netsh winsock ዳግም አስጀምር netsh int ip ip-reset ipconfig / release ipconfig / renew
3. Wait for the commands to be executed and ኮምፒተርዎን እንደገና ያስጀምሩ.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. አስጀምር ትዕዛዝ መስጫ by searching in the የ Windows ምናሌ and click on Run as administrator.
2. ይተይቡ ipconfig / flushdns in the command window and hit አስገባ.
እንዲሁም ይህን አንብብ: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. አስነሳ ሩጫ የንግግር ሳጥን በመጫን የዊንዶውስ + R ቁልፎች አንድ ላየ.
2. ይተይቡ ncpa.cpl እና ተኩስ ቁልፍ ያስገቡ.
3. ንቁውን በቀኝ ጠቅ ያድርጉ የአውታረ መረብ አስማሚ እና ጠቅ ያድርጉ ንብረቶች.
4. ምልክት ያንሱ የበይነመረብ ፕሮቶኮል ስሪት 6 (TCP / IPv6) አማራጭ.
5. በመጨረሻም ጠቅ ያድርጉ OK to save the changes and check if the issue is resolved.
ማስታወሻ: If you use multiple network connections, navigate to የአውታረ መረብ እና ማጋሪያ ማዕከል ና አስማሚ ለውጥ settings. Right-click on the adapter and select አሰናክል. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. ይተይቡ እቃ አስተዳደር in the Windows search menu and click ክፈት.
2. በ ላይ ሁለቴ ጠቅ ያድርጉ የአውታረ መረብ ማስተካከያዎች ለማስፋት.
3. በቀኝ መዳፊት አዝራሩ ላይ ጠቅ ያድርጉ ሾፌር (ምሳ ኢንቴል(አር) ባለሁለት ባንድ ገመድ አልባ-ኤሲ 3168) እና ጠቅ ያድርጉ ነጂ አዘምን.
4. ላይ ጠቅ ያድርጉ ኮምፒተርዎን ለአሽከርካሪዎች ያስሱ to locate and install a driver manually.
5. ላይ ጠቅ ያድርጉ አሳሽ button to choose any directory and click on ቀጣይ.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, ለመሳሪያዎ ምርጥ ነጂዎች ቀድሞውኑ ተጭነዋል.
6. ላይ ጠቅ ያድርጉ ገጠመ ከመስኮቱ ለመውጣት ፡፡
7. እንደገና ጀምር the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. አስጀምር እቃ አስተዳደር from the Windows search menu.
2. በ ላይ በቀኝ ጠቅ ያድርጉ ሾፌር እና ይምረጡ መሣሪያውን አራግፍ.
3. A warning prompt will be displayed on the screen. Check the box “ለዚህ መሳሪያ የሾፍት ሶፍትዌር ይሰርዙ” and confirm the prompt by clicking ያራግፉ.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ጎብኝ የአምራች ድር ጣቢያ.
2. አግኝ ና አውርድ በፒሲዎ ላይ ካለው የዊንዶውስ ስሪት ጋር የሚዛመዱ አሽከርካሪዎች.
3. አንዴ ከወረደ በኋላ በ ላይ ሁለቴ ጠቅ ያድርጉ የወረደ ፋይል and follow the given instructions to install it.
እንዲሁም ይህን አንብብ: How to set up a VPN on Windows 10
ዘዴ 10: ዊንዶውስ አዘምን
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. ን ይጫኑ ዊንዶውስ + እኔ ቁልፎች አንድ ላይ ለመክፈት ቅንብሮች በኮምፒተርዎ ላይ.
2. ይምረጡ ዝመና እና ደህንነት.
3. ይምረጡ ዝማኔዎችን ይመልከቱ.
4A. Click አሁን ይጫኑ ያለውን የቅርብ ጊዜ ዝማኔ ለማውረድ እና ለመጫን።
4ለ የእርስዎ ስርዓት አስቀድሞ የተዘመነ ከሆነ፣ ከዚያ ይታያል ዘምነዋል መልእክት.
ዘዴ 11፡ የቅርብ ጊዜ ዝመናዎችን አራግፍ
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. ተጭነው ይያዙ የዊንዶውስ + R ቁልፎች አንድ ላይ ለመክፈት ሩጫ የመገናኛ ሳጥን.
2. ይተይቡ appwiz.cpl እና ተኩስ አስገባ.
3. ላይ ጠቅ ያድርጉ የተጫኑ ዝማኔዎችን ይመልከቱ.
4. Select the most recent update and click on ያራግፉ.
5. Confirm the prompt, if any, and ፒሲውን እንደገና ያስነሱ.
እንዲሁም ይህን አንብብ: How to Fix Firefox Not Loading Pages
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
ማስታወሻ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ቅንብሮች እንግዲህ ስርዓት ና ስለኛ. Once you have reset your network, you have to reinstall all networking software እንደ የቪፒኤን ደንበኞች or ምናባዊ መቀየሪያዎች.
1. ተጭነው ይያዙ የዊንዶውስ + I ቁልፎች አንድ ላይ ለመክፈት የ Windows ቅንብሮች.
2. ላይ ጠቅ ያድርጉ አውታረ መረብ እና በይነመረብ.
3. ላይ ጠቅ ያድርጉ የአውታረ መረብ ዳግም ማስጀመር በታች ሁናቴ.
4. Confirm the prompt by clicking on አሁን ዳግም ያስጀምሩ.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
የሚመከር:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.