Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
ዳግም አስነሳ እና ትክክለኛ የማስነሻ መሳሪያ ጉዳይን ምረጥ [የተፈታ]
ዘዴ 1፡ ትክክለኛ የቡት ማዘዣ አዘጋጅ
ስህተቱን እያዩ ይሆናል"Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. ኮምፒውተርዎ ሲጀምር (ከቡት ስክሪኑ ወይም ከስህተት ስክሪን በፊት)፣ ደጋግሞ Delete ወይም F1 ወይም F2 ቁልፍን (እንደ ኮምፒውተርዎ አምራች ላይ በመመስረት) ይጫኑ። ባዮስ ማዋቀርን ያስገቡ.
2.አንድ ጊዜ በ BIOS ማዋቀር ውስጥ ከገቡ ከአማራጮች ዝርዝር ውስጥ ቡት ትርን ይምረጡ።
3.አሁን ኮምፒውተሩን ያረጋግጡ ሃርድ ዲስክ ወይም ኤስኤስዲ በ Boot Order ውስጥ እንደ ዋና ቅድሚያ ተቀምጧል። ካልሆነ ወደላይ ወይም ወደ ታች የቀስት ቁልፎችን ተጠቀም ሃርድ ዲስክን ከላይ አስቀምጠው ይህም ማለት ኮምፒዩተሩ መጀመሪያ ከየትኛውም ምንጭ ይልቅ ይነሳል ማለት ነው።
4.በመጨረሻ, ይህንን ለውጥ ለማስቀመጥ እና ለመውጣት F10 ን ይጫኑ. ይህ ሊኖረው ይገባል Fix Reboot and Select Proper Boot Device Issueካልሆነ ከዚያ ይቀጥሉ።
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
ዲያግኖስቲክስ ፒሲዎን እንደገና ለማስጀመር እና ኮምፒዩተሩ ሲጀምር (ከማስጀመሪያው በፊት) F12 ቁልፍን ይጫኑ እና የቡት ሜኑ ሲመጣ ቡት ቱ ዩቲሊቲ ክፋይ የሚለውን አማራጭ ወይም የዲያግኖስቲክስ ምርጫን ያደምቁ እና ዲያግኖስቲክስን ለመጀመር Enter ን ይጫኑ። ይህ በራስ ሰር ሁሉንም የስርዓትዎን ሃርድዌር ይፈትሻል እና ማንኛውም ችግር ከተገኘ ተመልሶ ሪፖርት ያደርጋል።
የሚመከር: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
አስፈላጊ: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. የዊንዶውስ 10 ማስነሻ ዲቪዲ አስገባ እና ፒሲዎን እንደገና ያስጀምሩ።
2. ከሲዲ ወይም ዲቪዲ ለመነሳት ማንኛውንም ቁልፍ እንዲጫኑ ሲጠየቁ ለመቀጠል ማንኛውንም ቁልፍ ይጫኑ።
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.ዳግም አስጀምር እና በተሳካ ሁኔታ አለህ Fix Reboot and Select Proper Boot Device issueካልሆነ ቀጥል።
እንዲሁም፣ እንዴት ማስተካከል እንደሚቻል ያንብቡ አውቶማቲክ ጥገና ፒሲዎን ሊጠግነው አልቻለም።
ዘዴ 5፡ UEFI ቡትን አንቃ
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
የማስነሻ ዝርዝር አማራጭን ወደ UEFI ቀይር የመጫን የቆየ አማራጭን አሰናክል ROM ደህንነቱ የተጠበቀ ማስነሳትን አንቃ
3.ቀጣይ፣ ከቡት ማዋቀር ለመውጣት F10 ን መታ ያድርጉ።
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
ማስታወሻ: ሁልጊዜ የስርዓት የተጠበቀው ክፍልፍል (በአጠቃላይ 100 ሜባ) ገቢር ምልክት ያድርጉ እና በስርዓት የተያዘ ክፍልፍል ከሌለዎት C: Driveን እንደ ንቁ ክፍልፍል ምልክት ያድርጉ።
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
ዘዴ 7: Windows 10 ን መጫንን መጠገን
ከላይ ከተዘረዘሩት መፍትሔዎች ውስጥ አንዳቸውም የማይረዱዎት ከሆነ የእርስዎ HDD ደህና መሆኑን እርግጠኛ መሆን ይችላሉ ነገር ግን ስህተቱን እያዩ ሊሆን ይችላል "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” ምክንያቱም ኦፕሬቲንግ ሲስተም ወይም በኤችዲዲ ላይ ያለው የቢሲዲ መረጃ በሆነ መንገድ ተደምስሷል። ደህና ፣ በዚህ አጋጣሚ ዊንዶውስ ለመጫን መሞከር ይችላሉ ነገር ግን ይህ ካልተሳካ ብቸኛው መፍትሄ አዲስ የዊንዶውስ ቅጂን መጫን ነው (ንፁህ ጫን)።
ያ ነው በተሳካ ሁኔታ ያለህ ያስተካክሉ Reboot and Select proper Boot device issue ግን አሁንም ይህንን ልጥፍ በተመለከተ ማንኛቸውም ጥያቄዎች ካሉዎት በአስተያየቱ ክፍል ውስጥ እነሱን ለመጠየቅ ነፃነት ይሰማዎ።