When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- هجوم الفيروسات أو البرامج الضارة.
- نظام التشغيل القديم.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe الرمز.
2. If the status is set to غير متصل، اضغط على Network globe icon, choose your Wi-Fi network and click on التواصل button. Make sure وضع الطيران لم يتم تشغيله.
3. If you again face the same network connection error code, then click on the قطع button, wait for some time and reconnect it again.
4. Try connecting to a different واي فاي network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. انقر بزر الماوس الأيمن على رمز Wi-Fi وحدد افتح إعدادات الشبكة والإنترنت.
6. انقر على واي فاي.
7. Scroll down the right menu, click on إدارة الشبكات المعروفة.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select ننسى.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
الطريقة الأولى: إعادة تشغيل جهاز التوجيه
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
ملحوظة: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. أعثر على زر الطاقة في الجزء الخلفي من جهاز التوجيه الخاص بك.
2. اضغط على الزر مرة واحدة أطفئه.
3. الآن ، قطع من خلال Router power cable وانتظر حتى يتم استنزاف الطاقة بالكامل من المكثفات.
4. ثم، إعادة الاتصال ال سلك الطاقة وقم بتشغيله بعد دقيقة.
5. انتظر حتى يتم إعادة تأسيس اتصال الشبكة و حاول تسجيل الدخول مرة أخرى.
اقرأ أيضا: حل مشكلة عدم ظهور أجهزة الكمبيوتر على الشبكة في نظام التشغيل Windows 10
الطريقة الرابعة: تشغيل مستكشف أخطاء الشبكة ومصلحها
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ضرب مفتاح ويندوز ونوع استكشاف أخطاء الإعدادات وإصلاحها في شريط البحث و فتح.
2. انقر على أدوات استكشاف الأخطاء وإصلاحها الإضافية.
3. حدد محول الشبكة وانقر على قم بتشغيل مستكشف الأخطاء ومصلحها.
4. Select the network adapter to diagnose وانقر على التالى.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is استكشاف الأخطاء وإصلاحها لا يمكن تحديد المشكلة، انقر فوق إغلاق مستكشف الأخطاء ومصلحها.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
اقرأ أيضا: إصلاح مشاركة العائلة على YouTube TV لا يعمل
الطريقة الخامسة: إصلاح ملفات النظام
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (مدقق ملفات النظام) /DISM (إدارة صورة النشر والإدارة) utilities on your Windows 10 PC.
1. ضرب مفتاح ويندوز، نوع موجه الأوامر وانقر على تشغيل كمسؤول.
2. انقر على نعم في ال التحكم في حساب المستخدم مستعجل.
3. اكتب chkdsk C: / f / r / x القيادة وضرب مفتاح الادخال.
4. إذا طُلب منك رسالة، لا يمكن تشغيل Chkdsk… وحدة التخزين… قيد الاستخدام، ثم اكتب Y وضرب مفتاح الادخال.
5. مرة أخرى، اكتب الأمر: SFC / SCANNOW والصحافة مفتاح الادخال لتشغيل مدقق ملفات النظام مسح.
ملحوظة: سيتم بدء فحص النظام وسيستغرق الأمر بضع دقائق حتى ينتهي. وفي الوقت نفسه، يمكنك الاستمرار في أداء الأنشطة الأخرى ولكن انتبه إلى عدم إغلاق النافذة عن طريق الخطأ.
بعد الانتهاء من الفحص ستظهر إحدى الرسالتين التاليتين:
- لم يعثر Windows Resource Protection على أية انتهاكات للتكامل.
- تعذر على Windows Resource Protection تنفيذ العملية المطلوبة.
- عثر Windows Resource Protection على الملفات الفاسدة ونجح في إصلاحها.
- عثر Windows Resource Protection على ملفات تالفة ولكنه لم يتمكن من إصلاح بعضها.
6. بمجرد الانتهاء من الفحص، إعادة تشغيل جهاز الكمبيوتر الخاص بك.
7. ابدأ مرة أخرى موجه الأوامر كمسؤول وتنفيذ الأوامر المعطاة واحدة تلو الأخرى:
Dism.exe / عبر الإنترنت / تنظيف الصورة / scanhealth det.exe / عبر الإنترنت / تنظيف الصورة / استعادة الصحة Dism.exe / عبر الإنترنت / تنظيف الصورة / startcomponentcleanup
ملحوظة: يجب أن يكون لديك اتصال إنترنت فعال لتنفيذ أوامر DISM بشكل صحيح.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ضرب مفتاح ويندوز ونوع مدير الجهاز in the Windows search menu. Click on ساعات العمل.
2. قم بتوسيع شبكة محولات القسم بالنقر المزدوج عليه.
3. انقر بزر الماوس الأيمن على جهازك سائق الشبكة (فمثلا، Intel (R) Dual Band Wireless-AC 3168) وحدد تعطيل الجهاز الخيار.
4. Confirm the below prompt by clicking on نعم.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the تمكين الجهاز الخيار.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
اقرأ أيضا: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. اذهب إلى قائمة البحث واكتب كمد. انقر على تشغيل كمسؤول.
2. اكتب ما يلي الأوامر وضرب مفتاح الادخال.
إعادة تعيين WINSOCK NETSH NETSH إعادة تعيين بروتوكول الإنترنت كثافة العمليات IPCONFIG / الإفراج ipconfig / تجديد
3. Wait for the commands to be executed and أعد تشغيل جهاز الكمبيوتر الخاص بك.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. إطلاق موجه الأوامر by searching in the Windows menu and click on Run as administrator.
2. اكتب IPCONFIG / flushdns in the command window and hit أدخل.
اقرأ أيضا: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. إطلاق يجري مربع الحوار عن طريق الضغط مفاتيح Windows + R. معا.
2. اكتب ncpa.cpl وضرب مفتاح الادخال.
3. Right-click on your active محول الشبكة وانقر على عقارات.
4. قم بإلغاء تحديد ملف إصدار بروتوكول الإنترنت 6 (TCP / IPv6) الخيار.
5. أخيرًا ، انقر فوق OK to save the changes and check if the issue is resolved.
ملحوظة: If you use multiple network connections, navigate to مركز الشبكة والمشاركة و تغيير المحول settings. Right-click on the adapter and select تعطيل. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. اكتب مدير الجهاز in the Windows search menu and click ساعات العمل.
2. انقر نقرًا مزدوجًا فوق ملف شبكة محولات لتوسيعه.
3. انقر بزر الماوس الأيمن على جهازك سائق (على سبيل المثال إنتل (R) ثنائي الموجات اللاسلكية-أس شنومكس) وانقر تحديث السائق.
4. انقر على تصفح جهاز الكمبيوتر الخاص بي للسائقين to locate and install a driver manually.
5. انقر على المتصفح button to choose any directory and click on التالى.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, لقد تم بالفعل تثبيت أفضل برامج التشغيل لجهازك.
6. انقر على اغلاق للخروج من النافذة.
7. إعادة تشغيل the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. إطلاق مدير الجهاز from the Windows search menu.
2. انقر بزر الماوس الأيمن على سائق وحدد إلغاء تثبيت الجهاز.
3. A warning prompt will be displayed on the screen. Check the box “احذف برنامج التشغيل لهذا الجهاز” and confirm the prompt by clicking إلغاء.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. زيارة موقع الشركة المصنعة.
2. و تحميل برامج التشغيل المطابقة لإصدار Windows الموجود على جهاز الكمبيوتر الخاص بك.
3. بمجرد التنزيل، انقر نقرًا مزدوجًا فوق الملف الذي تم تنزيله and follow the given instructions to install it.
اقرأ أيضا: How to set up a VPN on Windows 10
الطريقة الأولى: تحديث Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. اضغط على ويندوز + I مفاتيح معا لفتح الإعدادات على حاسوبك.
2. حدد التحديث والأمان.
3. حدد التحقق من وجود تحديثات.
4A. Click تثبيت الآن to download and install the latest update available.
4B. If your system is already up-to-date, then it will show أنت على اطلاع رسالة.
الطريقة التاسعة: إلغاء تثبيت التحديثات الأخيرة
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. اضغط مع الاستمرار مفاتيح Windows + R. معا لفتح يجري صندوق المحادثة.
2. اكتب appwiz.cpl وضرب أدخل.
3. انقر على عرض التحديثات المثبتة.
4. Select the most recent update and click on إلغاء.
5. Confirm the prompt, if any, and إعادة تشغيل جهاز الكمبيوتر.
اقرأ أيضا: كيفية إصلاح مشكلة عدم تحميل الصفحات في متصفح فايرفوكس
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the محولات الشبكة installed in your PC along with their settings. All the stored settings are stored to default settings.
ملحوظة: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to الإعدادات then System و من نحن. Once you have reset your network, you have to reinstall all networking software مثل عملاء VPN or مفاتيح افتراضية.
1. اضغط مع الاستمرار مفاتيح Windows + I معا لفتح إعدادات ويندوز.
2. انقر على الشبكة والإنترنت.
3. انقر على شبكة إعادة مع الحالة.
4. قم بتأكيد المطالبة بالضغط على إعادة التعيين الآن.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
أوصى:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.