If you don’t see Wireless Adapter under Network Connections neither there is a Network adapter tab under device manager then it seems like your Network Adapter is missing or not detected on your Windows 10 which is a serious issue because you won’t be able to access the Internet until the issue is resolved. In short, when you click on the Wireless icon on the system tray there won’t be any device listed in order to connect to the Internet and if you open Device Manager then you won’t see the Network Adapter tab.
These are the reasons behind the Network Adapter missing issue:
- Network adapter missing in Device manager
- No Network Adapters showing in Device Manager
- Network Adapter Not Detected
- Network Adapter Not Found Windows 10
- No Network Adapter In Device Manager
The main cause of this issue seems to be outdated, incompatible or corrupted Network Adapter drivers. If you have recently upgraded from previous versions of Windows then it’s possible that the old drivers will not work with the new Windows and hence the issue. So without wasting any time let’s see how to actually Fix Network Adapter Missing in Windows 10 issue with the below-listed troubleshooting steps.
Note: Just make sure to uninstall any VPN software on your PC before continuing.
إصلاح محول الشبكة المفقود في نظام التشغيل Windows 10
تأكد من إنشاء نقطة استعادة في حالة حدوث خطأ ما.
Method 1: Reboot your Computer
معظمنا يعرف عن هذه الخدعة الأساسية للغاية. يمكن أن تؤدي إعادة تشغيل جهاز الكمبيوتر الخاص بك في بعض الأحيان إلى إصلاح أي تعارض في البرامج من خلال منحه بداية جديدة. لذلك، إذا كنت شخصًا يفضل وضع جهاز الكمبيوتر الخاص به في وضع السكون، فإن إعادة تشغيل جهاز الكمبيوتر الخاص بك تعد فكرة جيدة.
1. انقر على قائمة البداية ثم انقر على زر الطاقة متاح في الزاوية اليسرى السفلى.
2. بعد ذلك ، انقر فوق إعادة تشغيل الخيار وسيقوم جهاز الكمبيوتر الخاص بك بإعادة تشغيل نفسه.
بعد إعادة تشغيل الكمبيوتر، تحقق مما إذا كانت مشكلتك قد تم حلها أم لا.
Method 2: Flush DNS and Reset Winsock Components
1. Open elevated Command Prompt.
2. الآن اكتب الأمر التالي واضغط على Enter بعد كل أمر:
IPCONFIG / الإفراج IPCONFIG / flushdns ipconfig / تجديد
3. افتح موجه الأوامر مرة أخرى واكتب الأمر التالي واحدًا تلو الآخر واضغط على زر الإدخال بعد كل أمر:
ipconfig /flushdns nbtstat –r netsh int ip إعادة تعيين netsh Winsock إعادة تعيين
4. أعد التشغيل لتطبيق التغييرات. يبدو أن تنظيف DNS Fix Network Adapter Driver Issues on Windows 10.
Method 3: Run WWAN AutoConfig Service
1. اضغط على مفتاح Windows + R ثم اكتب services.msc ثم اضغط على Enter.
2. تجد WWAN AutoConfig Service in the list (press W to reach to the end of the list quickly).
3. انقر نقرًا مزدوجًا فوق WWAN AutoConfig Service.
4. If the service is already running then click on Stop, then from the Startup type drop-down select التلقائية.
5. Click Apply followed by OK.
6. انقر بزر الماوس الأيمن على WWAN AutoConfig Service وحدد بداية.
الطريقة السادسة: تحديث برامج تشغيل محول الشبكة
1. اضغط على مفتاح Windows + R واكتب “devmgmt.msc"في مربع الحوار "تشغيل" لفتحه مدير الجهاز.
2. توسيع شبكة محولات، ثم انقر بزر الماوس الأيمن على ملف تحكم واي فاي (على سبيل المثال Broadcom أو Intel) وحدد تحديث برنامج التشغيل.
3. الآن حدد "ابحث تلقائيًا عن برنامج التشغيل المحدث".
4. الآن Windows will automatically search for the Network driver update and if new update is found, it will automatically download and install it.
5. بمجرد الانتهاء، أغلق كل شيء وأعد تشغيل جهاز الكمبيوتر الخاص بك.
6. إذا كنت لا تزال تواجه Network Adapter Missing in Windows 10 issue, then again right-click on your WiFi controller and select تحديث السائق في إدارة الأجهزة.
7. الآن، في تحديث برنامج التشغيل لنظام التشغيل Windows، حدد “تصفح جهاز الكمبيوتر الخاص بي للحصول على برنامج التشغيل."
8. الآن حدد "اسمح لي بالاختيار من قائمة برامج التشغيل المتوفرة على جهاز الكمبيوتر الخاص بي."
9. حاول قم بتحديث برامج التشغيل من الإصدارات المدرجة (تأكد من تحديد الأجهزة المتوافقة).
10. إذا لم ينجح ما سبق فانتقل إلى موقع الشركة المصنعة لتحديث السائقين.
11. قم بتنزيل أحدث برنامج تشغيل وتثبيته من موقع الشركة المصنعة ثم أعد تشغيل جهاز الكمبيوتر الخاص بك.
Method 5: Uninstall Network Adapter Drivers
1. اضغط على مفتاح Windows + R ثم اكتب "devmgmt.msc"واضغط على Enter لفتح Device Manager.
2. قم بتوسيع محولات الشبكة وابحث عنها اسم محول الشبكة الخاص بك.
3. تأكد من أنك قم بتدوين اسم المحول فقط في حالة حدوث خطأ ما.
4. Right-click on your network adapter and uninstall it.
5. It will ask for confirmation حدد "نعم".
6. Restart your PC and Windows will automatically install the network adapter drivers again.
7. If the drivers are not installed automatically then again open the Device Manager.
8. From the Device Manager menu, click on اكشن ثم انقر فوق "تفحص تغييرات الأجهزة".
الطريقة الأولى: تأكد من تحديث Windows
1. صحافة مفتاح Windows + أقوم بفتح الإعدادات ثم النقر فوق التحديث والأمان.
2. From the left-hand side, menu click on تحديث ويندوز.
3. الآن انقر فوق "التحقق من وجود تحديثات"للتحقق من وجود أي تحديثات متوفرة.
4. If any updates are pending then click on قم بتنزيل وتثبيت التحديثات.
5. Once the updates are downloaded, install them and your Windows will become up-to-date.
6. After the updates are installed reboot your PC to save changes.
الطريقة السابعة: تشغيل مستكشف أخطاء محول الشبكة ومصلحها
1. اضغط على مفتاح Windows + I لفتح الإعدادات ثم انقر فوق التحديث والأمان.
2. من القائمة اليسرى، حدد استكشاف.
3. ضمن استكشاف الأخطاء وإصلاحها، انقر فوق اتصالات الإنترنت ثم انقر فوق قم بتشغيل مستكشف الأخطاء ومصلحها.
4. اتبع المزيد من التعليمات التي تظهر على الشاشة لتشغيل مستكشف الأخطاء ومصلحها.
5. إذا لم يؤد ما ورد أعلاه إلى حل المشكلة، فمن نافذة استكشاف الأخطاء وإصلاحها، انقر فوق محول الشبكة ثم انقر فوق قم بتشغيل مستكشف الأخطاء ومصلحها.
5. أعد تشغيل جهاز الكمبيوتر الخاص بك لحفظ التغييرات ومعرفة ما إذا كان بإمكانك القيام بذلك fix the Network Adapter Missing issue.
الطريقة التاسعة: تثبيت برنامج Intel PROSet/Wireless
في بعض الأحيان يكون سبب المشكلة هو برنامج Intel PROSet القديم، وبالتالي يبدو أن تحديثه يحدث fix Network Adapter Missing in Windows 10 issue. وبالتالي، تذهب هنا وقم بتنزيل أحدث إصدار من برنامج PROSet/Wireless وقم بتثبيته. هذا هو برنامج تابع لجهة خارجية يدير اتصال WiFi الخاص بك بدلاً من Windows، وإذا كان برنامج PROset/Wireless قديمًا، فقد يتسبب ذلك في حدوث مشكلة في برامج التشغيل محول الشبكة اللاسلكية. Hence, read How to Update Network Adapter Drivers on Windows 10.
الطريقة السادسة: إعادة ضبط اتصال الشبكة
1. اضغط على مفتاح Windows + I لفتح الإعدادات ثم انقر فوق الشبكة والإنترنت.
2. من القائمة اليسرى، حدد الحالة.
3. الآن قم بالتمرير لأسفل وانقر فوق شبكة إعادة في الجزء السفلي.
4. انقر مرة أخرى على "إعادة التعيين الآن"ضمن قسم إعادة ضبط الشبكة.
5. This will successfully reset your network adapter and once it is complete the system will be restarted.
الطريقة 10: قم بإجراء استعادة النظام
System Restore always works in resolving the error, therefore System Restore can definitely help you in fixing this error. So without wasting any time run system restore in order to resolve Network Adapter Missing issue.
Method 11: Using elevated Command Prompt
1. اضغط على مفتاح Windows + X ثم حدد موجه الأوامر (المسؤول).
2. اكتب الأمر التالي في cmd واضغط على Enter:
netcfg –s n
3. This will display a list of networking protocols and in that list find DNI_DNE.
4. If DNI_DNE is listed then type the following command into cmd:
reg حذف HKCRCLSID {988248f3-a1ad-49bf-9170-676cbbc36ba3} / va / f
netcfg -v -u dni_dne
5. If you don’t see DNI_DNE listed then only run the command netcfg -v -u dni_dne.
6. Now if you receive the error 0x80004002 after trying to run the above command then you need to delete the above key manually.
7. اضغط على مفتاح Windows + R ثم اكتب رجديت ثم اضغط على Enter.
8. Navigate to the following Registry Key:
HKEY_CLASSES_ROOTCLSID{988248f3-a1ad-49bf-9170-676cbbc36ba3}
9. Delete this key and then again type netcfg -v -u dni_dne command in cmd.
10. أعد تشغيل الكمبيوتر لحفظ التغييرات.
موصى به لك:
هذا كل ما لديك بنجاح إصلاح محول الشبكة المفقود في نظام التشغيل Windows 10 ولكن إذا كان لا يزال لديك أي أسئلة بخصوص هذا المنشور ، فلا تتردد في طرحها في قسم التعليقات.