When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Köhnəlmiş Əməliyyat Sistemi.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Bağlantı yoxdur, basın Network globe icon, choose your Wi-Fi network and click on Birləşdirmək button. Make sure Təyyarə rejimi açıq deyil.
3. If you again face the same network connection error code, then click on the ayırmaq button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. düyməsini sağ basın Wi-Fi nişanı və seçin Open Network & Internet settings.
6. Basın Wi-Fi.
7. Scroll down the right menu, click on Məlum şəbəkələri idarə edin.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Unut
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metod 2: Routeri yenidən başladın
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Qeyd: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. tapın Güc düyməsi at the back of your router.
2. Press the button once to söndürün.
3. İndi, ayırmaq Sizin Router power cable və gücün kondansatörlərdən tamamilə boşaldılmasını gözləyin.
4. Sonra, təkrar bu elektrik kabel və bir dəqiqədən sonra onu yandırın.
5. Wait until the network connection is re-established and try signing in again.
Həm də oxuyun: Fix Computers Not Showing Up on Network in Windows 10
Metod 3: Şəbəkə Gidericisini Çalıştırın
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. vurun Windows açarı və növü Parametrləri həll edin axtarış çubuğunda və Açıq.
2. Basın Əlavə nasazlıqlar.
3. Seçin Şəbəkə Adapteri və basın Sorunu gidericiyi çalıştırın.
4. Select the network adapter to diagnose və basın sonrakı.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, basın Problem aradan qaldırıcısını bağlayın.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Həm də oxuyun: Ailə Paylaşımının YouTube TV-nin İşləməməsini Düzəldin
Metod 4: Sistem fayllarını təmir edin
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistem Fayl Denetleyicisi) /DISM (Deployment Image Servicing və İdarəetmə) utilities on your Windows 10 PC.
1. vurun Windows açarı, növü Command Prompt və basın Administrator olaraq işləyin.
2. Basın bəli ci İstifadəçi Hesabının İdarəsi tez.
3. Tipi chkdsk C: / f / r / x əmr edin və vurun Enter düyməsini vurun.
4. Əgər sizə mesaj göndərilsə, Chkdsk işləyə bilmir...həcmi... istifadə prosesindədir, sonra yazın Y və vurdu Enter düyməsini vurun.
5. Yenə əmri yazın: sfc / scannow və mətbuat Enter düyməsini vurun çalıştırmak üçün Sistem Fayl Denetleyicisi tarama.
Qeyd: Sistem skanına başlanacaq və onu bitirmək bir neçə dəqiqə çəkəcək. Bu vaxt siz digər fəaliyyətləri yerinə yetirməyə davam edə bilərsiniz, lakin pəncərəni təsadüfən bağlamamağa diqqət yetirin.
Skanı tamamladıqdan sonra o, bu mesajlardan birini göstərəcək:
- Windows Resource Protection heç bir bütövlük pozuntusu tapmadı.
- Windows Resurs Müdafiəsi tələb olunan əməliyyatı yerinə yetirə bilmədi.
- Windows Resurs Qoruma proqramı zədələnmiş faylları tapdı və onları uğurla təmir etdi.
- Windows Resource Protection, bozuk faylları tapdı, lakin bəzilarını düzəldə bilmədi.
6. Skan tamamlandıqdan sonra, yenidən başladın kompüterinizə.
7. Yenə işə salın Yönetici olaraq Komut İstemi və verilmiş əmrləri bir-birinin ardınca yerinə yetirin:
dism.exe /Online /təmizləmə-image /scanhealth dism.exe /Online /təmizləmə-image /resorehealth dism.exe /Online /təmizləmə-image /startcomponentcleanup
Qeyd: DISM əmrlərini düzgün yerinə yetirmək üçün işləyən internet bağlantınız olmalıdır.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. vurun Windows açarı və növü Cihaz meneceri in the Windows search menu. Click on açıq.
2. Genişləndirin Şəbəkə adapterləri üzərinə iki dəfə klikləməklə bölmə.
3. Üzərinizə sağ klikləyin Şəbəkə sürücü (misal üçün, Intel (R) Dual Band Wireless-AC 3168) və seçin Cihazı söndürün seçin.
4. Confirm the below prompt by clicking on bəli.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Cihazı aktiv edin seçin.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Həm də oxuyun: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Axtarış menyusuna keçin və yazın cmd. Basın Administrator olaraq işləyin.
2. Aşağıdakıları yazın əmrləri və vurdu Enter düyməsini vurun.
netsh Winsock reset netsh int ip sıfırlama ipconfig / azad ipconfig / yeniləmə
3. Əmrlərin yerinə yetirilməsini gözləyin və kompüterinizi yenidən başladın.
Metod 7: DNS önbelleğini təmizləyin
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Başla Command Prompt by searching in the Windows menyu and click on Run as administrator.
2. Tipi ipconfig / flushdns in the command window and hit Daxil edin.
Həm də oxuyun: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. düyməsini işə salın qaçış düyməsini basaraq dialoq qutusu Windows + R düymələri birlikdə.
2. Tipi ncpa.cpl və vurdu Enter düyməsini vurun.
3. Right-click on your active şəbəkə adapteri və basın Properties.
4. işarəsini çıxarın İnternet Protokol Versiyası 6 (TCP / IPv6) seçin.
5. Nəhayət, üzərinə klikləyin OK to save the changes and check if the issue is resolved.
Qeyd: If you use multiple network connections, navigate to Network və Paylaşım Mərkəzi və Adapteri dəyişdirin settings. Right-click on the adapter and select Disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tipi Cihaz meneceri in the Windows search menu and click açıq.
2. üzərinə iki dəfə klikləyin Şəbəkə adapterləri onu genişləndirmək.
3. Üzərinizə sağ klikləyin sürücü (məs Intel(R) Dual Band Wireless-AC 3168) basın və vurun Sürücüyü yeniləyin.
4. Basın Sürücülər üçün kompüterimə baxın to locate and install a driver manually.
5. Tıklayınız Browser button to choose any directory and click on sonrakı.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Əgər onlar artıq yenilənmiş mərhələdədirlərsə, ekranda aşağıdakı mesaj göstərilir: Cihazınız üçün ən yaxşı drayverlər artıq quraşdırılıb.
6. Basın yaxın pəncərədən çıxmaq.
7. Yenidən başlamaq the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Başla Cihaz meneceri from the Windows search menu.
2. düyməsini sağ basın sürücü və seçin Cihazı sil.
3. A warning prompt will be displayed on the screen. Check the box “Bu cihaz üçün sürücü proqramını silin” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. ziyarət edin istehsalçının veb saytı.
2. SİZİN ÜÇÜN MÜKEMMEL YERİ TAPIN və Download the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the yüklənmiş fayl və quraşdırmaq üçün verilən təlimatlara əməl edin.
Həm də oxuyun: Windows 10-da VPN-i necə qurmaq olar
Metod 10: Windows-u yeniləyin
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Basın Windows+I düymələri açmaq üçün birlikdə Parametrlər Kompüterinizdə.
2. Seçin Yeniləmə və Təhlükəsizlik.
3. Seçin Updates yoxlayın.
4A. Click İndi yükləyin to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Siz yenilənirsiniz mesaj.
Metod 11: Son yeniləmələri silin
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Basıb saxlayın Windows + R düymələri açmaq üçün birlikdə qaçış dialoq qutusu.
2. Tipi appwiz.cpl və vurdu Daxil edin.
3. Basın Yüklü güncellemeleri bax.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and kompüteri yenidən başladın.
Həm də oxuyun: Firefox səhifələrinin yüklənməməsini necə düzəltmək olar
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the şəbəkə adapterləri installed in your PC along with their settings. All the stored settings are stored to default settings.
Qeyd: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Parametrlər sonra Sistem və haqqında. Once you have reset your network, you have to reinstall all networking software kimi VPN müştəriləri or Virtual açarlar.
1. Basıb saxlayın Windows + I düymələri açmaq üçün birlikdə Windows Ayarları.
2. Basın Şəbəkə və İnternet.
3. Basın Şəbəkənin sıfırlanması altında Status.
4. üzərinə klikləməklə sorğunu təsdiq edin İndi yenidən qurun.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Tövsiyə edilir:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.