Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Yenidən başladın və Düzgün Yükləmə Cihazını Seçin [HƏL EDİLDİ]
Method 1: Set Correct Boot Order
Siz xətanı görürsünüz "Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Kompüteriniz işə salındıqda (Yükləmə ekranından və ya xəta ekranından əvvəl) Sil və ya F1 və ya F2 düyməsini (kompüterinizin istehsalçısından asılı olaraq) təkrar-təkrar basın. BIOS quraşdırmasına daxil olun.
2. BIOS quraşdırmasına daxil olduqdan sonra seçimlər siyahısından Boot sekmesini seçin.
3.İndi kompüterin olduğundan əmin olun Sərt disk və ya SSD Yükləmə qaydasında əsas prioritet kimi təyin edilir. Əgər yoxsa, yuxarı və ya aşağı ox düymələrindən istifadə edərək sabit diski yuxarıya yerləşdirin, bu o deməkdir ki, kompüter hər hansı digər mənbədən deyil, əvvəlcə ondan yüklənəcək.
4.Nəhayət, bu dəyişikliyi saxlamaq və çıxmaq üçün F10 düyməsini sıxın. Bu olmalıdır Fix Reboot and Select Proper Boot Device Issue, deyilsə, davam edin.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diaqnostikanı işə salmaq üçün kompüterinizi yenidən başladın və kompüter işə başlayan kimi (yükləmə ekranından əvvəl) F12 düyməsini basın və Yükləmə menyusu görünəndə Utility Partition-a yükləmə seçimini və ya Diaqnostika seçimini seçin və Diaqnostikaya başlamaq üçün enter düyməsini basın. Bu, sisteminizin bütün avadanlığını avtomatik yoxlayacaq və hər hansı problem aşkar edilərsə, hesabat verəcəkdir.
Tövsiyə edilir: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Mühüm: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Windows 10 yüklənə bilən quraşdırma DVD-sini daxil edin və kompüterinizi yenidən başladın.
2. CD və ya DVD-dən yükləmək üçün hər hansı düyməni basın tələb edildikdə, davam etmək üçün istənilən düyməni basın.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Yenidən başladın və müvəffəqiyyətlə əldə etdiniz Fix Reboot and Select Proper Boot Device issue, if not, continue.
Həmçinin, Avtomatik Təmirin kompüterinizi təmir edə bilməməsini necə düzəltmək olar bölməsini oxuyun.
Metod 5: UEFI açılışını aktivləşdirin
1.Kompüterinizi yenidən başladın və Yükləmə Quraşdırma proqramını açmaq üçün kompüterinizdən asılı olaraq F2 və ya DEL seçiminə toxunun.
2.The make the following changes:
Yükləmə siyahısı seçimini UEFI-ni Disable Load Legacy ROM-u Təhlükəsiz yükləmə seçimini aktivləşdirin
3.Sonra, Saxla və yükləmə parametrindən çıxmaq üçün F10 üzərinə klikləyin.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Qeyd: Həmişə Sistem Qorunan Bölməni (ümumiyyətlə 100mb) aktiv olaraq qeyd edin və Sistem Qorunan Bölməniz yoxdursa, C: Diski aktiv bölmə kimi qeyd edin.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metod 7: Windows 10-u bərpa edin
Əgər yuxarıdakı həll yollarından heç biri sizin üçün işləmirsə, HDD-nin yaxşı olduğuna əmin ola bilərsiniz, lakin səhvi görürsünüz "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” çünki əməliyyat sistemi və ya HDD-dəki BCD məlumatı birtəhər silinib. Yaxşı, bu halda, siz Windows-u bərpa etməyə cəhd edə bilərsiniz, lakin bu da uğursuz olarsa, yeganə həll yolu Windows-un yeni nüsxəsini quraşdırmaqdır (Təmiz Quraşdırma).
Uğurla əldə etdiyiniz budur Fix Reboot and Select proper Boot device issue lakin bu yazı ilə bağlı hələ də hər hansı bir sualınız varsa, şərh bölməsində onlardan soruşmaqdan çekinmeyin.