Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Не забравяйте да създадете точка за възстановяване, в случай че нещо се обърка.
Метод 1: Временно деактивирайте антивирусната програма и защитната стена
1. Щракнете с десния бутон върху Икона на антивирусна програма от системната област и изберете Изключване.
2. След това изберете времевата рамка, за която Антивирусната програма ще остане деактивирана.
Забележка: Изберете възможно най-малкото време, например 15 минути или 30 минути.
3.Once done, again check if the error resolves or not.
4. Натиснете клавиша Windows + I, след което изберете Control Panel.
5. След това щракнете върху Система и сигурност.
6. След това щракнете върху Защитна стена на Windows.
7. Сега от левия панел на прозореца щракнете върху Включване или изключване на защитната стена на Windows.
8.Изберете Изключване на защитната стена на Windows и рестартирайте компютъра. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Ако горният метод не работи, уверете се, че следвате точно същите стъпки, за да включите защитната стена отново.
Method 2: Delete Hidden Network Adapters
1. Натиснете клавиша Windows + R, след което въведете devmgmt.msc и натиснете Enter, за да отворите Мениджър на устройства.
2. Сега изберете Мрежови адаптери и след това щракнете върху Преглед> Показване на скрити устройства.
3.Right-click on each of the hidden devices and select Деинсталирайте устройството.
4.Do this for all the hidden devices listed under Network Adapters.
5. Рестартирайте вашия компютър, за да запазите промените.
Method 3: Turn ON Network Discovery
1. Натиснете клавиша Windows + X, след което изберете Control Panel.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings от лявото меню.
4.Check mark Включете мрежовото откриване and click Save changes.
5. Рестартирайте компютъра си, за да запазите промените и вижте дали можете Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Натиснете клавиша Windows + R, след което въведете ncpa.cpl и натиснете Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Properties.
3.Select Версия 4 Internet Protocol (TCP / IPv4) и щракнете върху Properties.
4. Сега щракнете Подробно in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Активирайте NetBIOS през TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Натиснете клавиша Windows + X, след което изберете Control Panel.
2.Type препоръчителен in the control panel search and click on Мениджър на идентификационни данни.
3.Select Идентификационни данни за Windows и след това кликнете върху Add a Windows credential.
4.One by one type the потребителско име и парола of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Properties.
2. Преминете към Раздел "Споделяне" and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Споделете тази папка” and make sure the Share name is correct.
4. Щракнете върху Прилагане, последвано от OK.
Method 7: Change Network Security settings
1. Натиснете клавиша Windows + R, след което въведете secpol.msc и натиснете Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.Щракнете два пъти върху Мрежова сигурност: ниво на удостоверяване на LAN Manager in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Щракнете върху Прилагане, последвано от OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Метод 8: Нулиране на TCP / IP
1. Щракнете с десния бутон върху бутона Windows и изберете „Команден ред (администратор)."
2. Сега въведете следната команда и натиснете enter след всяка от тях:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3. Отново отворете Admin Command Prompt и въведете следното и натиснете Enter след всяко:
- Ipconfig / flushdns
- nbtstat –r
- Netsh INT IP нулиране
- Netsh нулиране привлекателен
4. Рестартирайте, за да приложите промените.
Препоръчително за теб:
Това е, което имате успешно Fix Error code 0x80070035 The network path was not found но ако все още имате въпроси относно тази публикация, не се колебайте да ги зададете в секцията за коментари.