When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Остаряла операционна система.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe иконата.
2. If the status is set to Няма връзка, кликнете върху Network globe icon, choose your Wi-Fi network and click on Свържете button. Make sure Самолетен режим не е включен.
3. If you again face the same network connection error code, then click on the Прекъсване button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Щракнете с десния бутон върху Икона на Wi-Fi и изберете Open Network & Internet settings.
6. Кликнете върху Wi-Fi.
7. Scroll down the right menu, click on Управление на известни мрежи.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Забравете.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Метод 2: Рестартирайте рутера
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Забележка: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Намери бутон за захранване в задната част на вашия рутер.
2. Натиснете бутона веднъж, за да изключи го.
3. Сега, изключете вашият Router power cable и изчакайте, докато мощността от кондензаторите бъде напълно изтощена.
4. След това, свържете отново - захранващия кабел и го включете след минута.
5. Изчакайте, докато мрежовата връзка се възстанови и опитайте да влезете отново.
Също прочетено: Fix Computers Not Showing Up on Network in Windows 10
Метод 3: Стартирайте инструмента за отстраняване на неизправности в мрежата
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Натиснете бутона Windows клавиша и вид Настройки за отстраняване на неизправности в лентата за търсене и Отвори.
2. Кликнете върху Допълнителни инструменти за отстраняване на неизправности.
3. изберете Network Adapter и кликнете върху Изпълнете инструмента за отстраняване на неизправности.
4. Select the network adapter to diagnose и кликнете върху Напред.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, кликнете върху Затворете инструмента за отстраняване на неизправности.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Също прочетено: Коригирайте неработещото семейно споделяне на YouTube TV
Метод 4: Поправете системните файлове
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Проверка на системните файлове) /DISM (Изпълнение и управление на изображението за внедряване) utilities on your Windows 10 PC.
1. Натиснете бутона Windows клавиша, Тип Command Prompt и кликнете върху Изпълнявай като администратор.
2. Кликнете върху Да в Контролът на потребителските акаунти ред.
3. Тип chkdsk C: / f / r / x команда и удар Въведете ключ.
4. Ако бъдете подканени със съобщение, Chkdsk не може да работи...обемът е... в процес на използване, тогава въведете Y и удари Въведете ключ.
5. Въведете отново командата: SFC / SCANNOW и натиснете Въведете ключ за да стартирате Проверка на системните файлове сканирате.
Забележка: Ще бъде стартирано сканиране на системата и ще отнеме няколко минути, за да завърши. Междувременно можете да продължите да извършвате други дейности, но внимавайте да не затворите случайно прозореца.
След завършване на сканирането ще покаже едно от следните съобщения:
- Защитата на ресурсите на Windows не откри нарушения на целостта.
- Windows Resource Protection не можа да изпълни исканата операция.
- Windows Resource Protection откри повредени файлове и ги поправи успешно.
- Защитата на ресурсите на Windows откри повредени файлове, но не успя да поправи някои от тях.
6. След като сканирането приключи, рестартиране вашия компютър.
7. Отново стартирайте Команден ред като администратор и изпълнете дадените команди една след друга:
dism.exe /Онлайн /cleanup-image /scanhealth dism.exe /Онлайн /cleanup-image /restorehealth dism.exe /Онлайн /cleanup-image /startcomponentcleanup
Забележка: Трябва да имате работеща интернет връзка, за да изпълнявате правилно командите на DISM.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Натиснете бутона Windows клавиша и вид Device Manager in the Windows search menu. Click on отворено.
2. Разширете Мрежови адаптери раздел, като щракнете двукратно върху него.
3. Щракнете с десния бутон върху вашия Мрежов драйвер (например, Intel (R) Dual Band Wireless-AC 3168) И изберете Деактивиране на устройството опция.
4. Confirm the below prompt by clicking on Да.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Активиране на устройството опция.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Също прочетено: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type Cmd. Кликнете върху Изпълнявай като администратор.
2. Въведете следното команди и удари Въведете ключ.
Netsh нулиране привлекателен Netsh INT IP нулиране Ipconfig / освобождаване Ipconfig / поднови
3. Изчакайте командите да се изпълнят и рестартирайте компютъра си.
Метод 7: Изчистете DNS кеша
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. хвърлям Command Prompt by searching in the Windows меню and click on Run as administrator.
2. Тип Ipconfig / flushdns in the command window and hit Въведете.
Също прочетено: [SOLVED] Windows detected a hard disk problem
Метод 8: Деактивирайте IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Стартирайте бягане диалогов прозорец чрез натискане Windows + R клавиши заедно.
2. Тип ncpa.cpl и хит Въведете ключ.
3. Right-click on your active мрежов адаптер и кликнете върху Имоти.
4. Премахнете отметката от Интернет протокол версия 6 (TCP / IPv6) опция.
5. Накрая кликнете върху OK to save the changes and check if the issue is resolved.
Забележка: If you use multiple network connections, navigate to Мрежи и споделяне Center намлява Смяна на адаптер settings. Right-click on the adapter and select Правя неспособен. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Тип Device Manager in the Windows search menu and click отворено.
2. Щракнете два пъти върху Мрежови адаптери да го разшири.
3. Щракнете с десния бутон върху вашия шофьор (например Intel® Dual Band Wireless-AC 3168) и щракнете Обновяване на драйвера.
4. Кликнете върху Разгледайте моя компютър за драйвери за да намерите и инсталирате драйвер ръчно.
5. Кликнете върху Browser button to choose any directory and click on Напред.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Ако вече са в етап на актуализиране, екранът показва следното съобщение, Най-добрите драйвери за вашето устройство вече са инсталирани.
6. Кликнете върху Близо за да излезете от прозореца.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. хвърлям Device Manager from the Windows search menu.
2. Щракнете с десния бутон върху шофьор и изберете Деинсталирайте устройството.
3. A warning prompt will be displayed on the screen. Check the box “Изтрийте софтуера на драйвера за това устройство” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Посетете уебсайта на производителя.
2. Какво намлява Изтегли драйверите, съответстващи на версията на Windows на вашия компютър.
3. След като го изтеглите, щракнете два пъти върху изтеглен файл и следвайте дадените инструкции, за да го инсталирате.
Също прочетено: Как да настроите VPN на Windows 10
Метод 10: Актуализирайте Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Натисни Windows + I ключове заедно, за да отворите Настройки На вашия компютър.
2. изберете Актуализация и сигурност.
3. изберете Проверка за актуализации.
4A. Click Инсталирай сега за да изтеглите и инсталирате най-новата налична актуализация.
4B. Ако вашата система вече е актуална, тогава ще се покаже Вие сте в крак с времето съобщение.
Метод 11: Деинсталирайте последните актуализации
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Натиснете и задръжте Windows + R клавиши заедно, за да отворите бягане диалогов прозорец.
2. Тип appwiz.cpl и хит Въведете.
3. Кликнете върху Преглед на инсталирани актуализации.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and рестартирайте компютъра.
Също прочетено: Как да коригирате Firefox, който не зарежда страници
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the мрежови адаптери installed in your PC along with their settings. All the stored settings are stored to default settings.
Забележка: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Настройки след това Система намлява За нас. Once you have reset your network, you have to reinstall all networking software като VPN клиенти or Виртуални превключватели.
1. Натиснете и задръжте Windows + I клавиши заедно, за да отворите Windows Settings.
2. Кликнете върху Мрежа и интернет.
3. Кликнете върху Ресет на мрежата под Статус.
4. Confirm the prompt by clicking on Възстановете сега.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Препоръчва се:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.