Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Проблем с рестартиране и избор на правилно устройство за стартиране [РЕШЕН]
Метод 1: Задайте правилен ред на зареждане
Може да виждате грешката „Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Когато компютърът ви се стартира (преди екрана за зареждане или екрана за грешка), неколкократно натиснете клавиша Delete или F1 или F2 (в зависимост от производителя на компютъра), за да влезте в настройките на BIOS.
2. След като сте в настройката на BIOS, изберете раздела Boot от списъка с опции.
3. Сега се уверете, че компютърът Твърд диск или SSD е зададено като основен приоритет в реда на зареждане. Ако не, тогава използвайте клавишите със стрелки нагоре или надолу, за да зададете твърдия диск в горната част, което означава, че компютърът първо ще стартира от него, а не от друг източник.
4. Накрая натиснете F10, за да запазите тази промяна и да излезете. Това трябва да има Fix Reboot and Select Proper Boot Device Issue, ако не, продължете.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
За да изпълните Diagnostics, рестартирайте вашия компютър и докато компютърът се стартира (преди екрана за зареждане), натиснете клавиш F12 и когато се появи менюто Boot, маркирайте опцията Boot to Utility Partition или опцията Diagnostics и натиснете enter, за да стартирате диагностиката. Това автоматично ще провери целия хардуер на вашата система и ще докладва, ако бъде открит проблем.
Препоръчва се: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Важно: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Поставете стартиращия инсталационен DVD на Windows 10 и рестартирайте компютъра.
2. Когато бъдете подканени да натиснете произволен клавиш, за да стартирате от CD или DVD, натиснете произволен клавиш, за да продължите.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Рестартирайте и сте успешни Fix Reboot and Select Proper Boot Device issue, ако не, продължете.
Също така прочетете Как да коригирате Автоматичната поправка не можа да поправи вашия компютър.
Method 5: Enable UEFI Boot
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Забележка: Винаги маркирайте System Reserved Partition (обикновено 100mb) активен и ако нямате System Reserved Partition, тогава маркирайте C: Drive като активен дял.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Метод 7: Поправяне на инсталиране на Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
Това е, което имате успешно Фиксирайте Reboot and Select proper Boot device issue но ако все още имате някакви въпроси относно тази публикация, не се колебайте да ги зададете в секцията за коментари.