When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Outdated Operating System.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe আইকন।
2. If the status is set to সংযোগ বিচ্ছিন্ন, ক্লিক করুন Network globe icon, choose your Wi-Fi network and click on সংযোগ করা button. Make sure বিমান মোড চালু নেই
3. If you again face the same network connection error code, then click on the বিযুক্ত করা button, wait for some time and reconnect it again.
4. Try connecting to a different ওয়াইফাই network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. উপর রাইট ক্লিক করুন ওয়াই ফাই আইকন এবং নির্বাচন করুন Open Network & Internet settings.
6। ক্লিক করুন ওয়াইফাই.
7. Scroll down the right menu, click on পরিচিত নেটওয়ার্ক পরিচালনা করুন.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select ভুলে যাও
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
পদ্ধতি 2: রাউটার পুনরায় চালু করুন
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
বিঃদ্রঃ: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1। খোঁজো পাওয়ার বাটন at the back of your router.
2. Press the button once to বন্ধ কর.
৪. এখন, বিযুক্ত করা তোমার Router power cable এবং ক্যাপাসিটার থেকে শক্তি সম্পূর্ণরূপে নিষ্কাশন না হওয়া পর্যন্ত অপেক্ষা করুন।
৫. তারপর, পুনঃসংযোগ দ্য বৈদ্যুতিক তার এবং এক মিনিট পর এটি চালু করুন।
5. Wait until the network connection is re-established and try signing in again.
এছাড়াও পড়ুন: Fix Computers Not Showing Up on Network in Windows 10
পদ্ধতি 3: নেটওয়ার্ক ট্রাবলশুটার চালান
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. আঘাত উইন্ডোজ কী এবং টাইপ সমস্যা সমাধানের সেটিংস অনুসন্ধান বারে এবং খুলুন।
2। ক্লিক করুন অতিরিক্ত সমস্যা সমাধানকারী.
3। নির্বাচন করা নেটওয়ার্ক অ্যাডাপ্টারের এবং ক্লিক করুন সমস্যা সমাধানকারী চালান.
4. Select the network adapter to diagnose এবং ক্লিক করুন পরবর্তী.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, ক্লিক করুন সমস্যা সমাধানকারী বন্ধ করুন.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
এছাড়াও পড়ুন: ফ্যামিলি শেয়ারিং ইউটিউব টিভি কাজ করছে না তা ঠিক করুন
পদ্ধতি 4: সিস্টেম ফাইল মেরামত
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (সিস্টেম ফাইল পরীক্ষক) /DISM (স্থাপনা ইমেজ সেবা এবং ব্যবস্থাপনা) utilities on your Windows 10 PC.
1. আঘাত উইন্ডোজ কী, টাইপ করুন কমান্ড প্রম্পট এবং ক্লিক করুন প্রশাসক হিসাবে চালান.
2। ক্লিক করুন হাঁ মধ্যে ইউজার একাউন্ট কন্ট্রল প্রম্পট।
3। আদর্শ chkdsk C: / f / r / x কমান্ড এবং আঘাত কী প্রবেশ করান.
4. যদি আপনাকে একটি বার্তা দিয়ে অনুরোধ করা হয়, Chkdsk চলতে পারে না... ভলিউমটি... ব্যবহার প্রক্রিয়ায় আছে, তারপর, টাইপ করুন Y এবং আঘাত কী প্রবেশ করান.
5. আবার, কমান্ড টাইপ করুন: sfc / scannow এবং টিপুন কী প্রবেশ করান চালানোর জন্য সিস্টেম ফাইল পরীক্ষক স্ক্যান.
বিঃদ্রঃ: একটি সিস্টেম স্ক্যান শুরু করা হবে এবং এটি শেষ হতে কয়েক মিনিট সময় লাগবে। এদিকে, আপনি অন্যান্য ক্রিয়াকলাপগুলি চালিয়ে যেতে পারেন তবে দুর্ঘটনাক্রমে উইন্ডোটি বন্ধ না করার বিষয়ে মনে রাখবেন।
স্ক্যান সম্পূর্ণ করার পরে, এটি এই বার্তাগুলির মধ্যে একটি দেখাবে:
- উইন্ডোজ রিসোর্স প্রোটেকশন কোন অখণ্ডতা লঙ্ঘন খুঁজে পায়নি।
- উইন্ডোজ রিসোর্স সুরক্ষা অনুরোধ করা অপারেশন সম্পাদন করতে পারেনি৷
- উইন্ডোজ রিসোর্স সুরক্ষা দূষিত ফাইল খুঁজে পেয়েছে এবং সফলভাবে সেগুলি মেরামত করেছে৷
- উইন্ডোজ রিসোর্স প্রোটেকশন দূষিত ফাইল খুঁজে পেয়েছে কিন্তু তাদের কিছু ঠিক করতে পারেনি।
6. একবার স্ক্যান শেষ হলে, আবার শুরু আপনার পিসি.
7. আবার, লঞ্চ প্রশাসক হিসাবে কমান্ড প্রম্পট এবং প্রদত্ত কমান্ডগুলি একের পর এক চালান:
dism.exe/Online/cleanup-image/scanhealth dism.exe/Online/cleanup-image/restorehealth dism.exe/Online/cleanup-image/startcomponentcleanup
বিঃদ্রঃ: ডিআইএসএম কমান্ড সঠিকভাবে চালানোর জন্য আপনার অবশ্যই একটি কার্যকরী ইন্টারনেট সংযোগ থাকতে হবে।
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. আঘাত উইন্ডোজ কী এবং টাইপ ডিভাইস ম্যানেজার in the Windows search menu. Click on খোলা.
2. প্রসারিত করুন নেটওয়ার্ক অ্যাডাপ্টার section by double-clicking on it.
3. আপনার উপর ডান ক্লিক করুন নেটওয়ার্ক ড্রাইভার (উদাহরণ স্বরূপ, Intel (R) Dual Band Wireless-AC 3168) এবং নির্বাচন করুন ডিভাইস নিষ্ক্রিয় করুন বিকল্প।
4. Confirm the below prompt by clicking on হাঁ.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the ডিভাইস সক্রিয় করুন বিকল্প।
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
এছাড়াও পড়ুন: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. অনুসন্ধান মেনুতে যান এবং টাইপ করুন cmd কমান্ড। ক্লিক করুন প্রশাসক হিসাবে চালান.
2. নিম্নলিখিত টাইপ করুন কমান্ড এবং আঘাত কী প্রবেশ করান.
নাট্শ উইনসক রিসেট netsh int ip রিসেট ipconfig / রিলিজ ipconfig / নবায়ন
3. Wait for the commands to be executed and আপনার পিসি রিবুট করুন.
পদ্ধতি 7: DNS ক্যাশে ফ্লাশ করুন
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1। শুরু করা কমান্ড প্রম্পট by searching in the উইন্ডোজ মেনু and click on Run as administrator.
2। আদর্শ ipconfig / flushdns in the command window and hit প্রবেশ করান.
এছাড়াও পড়ুন: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1। চালু করুন চালান ডায়ালগ বক্স টিপে উইন্ডোজ + আর কী একসঙ্গে।
2। আদর্শ ncpa.cpl এবং আঘাত কী প্রবেশ করান.
3. Right-click on your active নেটওয়ার্ক অ্যাডাপ্টারের এবং ক্লিক করুন প্রোপার্টি.
4. আনচেক করুন ইন্টারনেট প্রোটোকল সংস্করণ 6 (টিসিপি / আইপিভি 6) বিকল্প।
5. অবশেষে, ক্লিক করুন OK to save the changes and check if the issue is resolved.
বিঃদ্রঃ: If you use multiple network connections, navigate to নেটওয়ার্ক and Sharing Center থেকে এবং অ্যাডাপ্টার পরিবর্তন করুন settings. Right-click on the adapter and select অক্ষম. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1। আদর্শ ডিভাইস ম্যানেজার in the Windows search menu and click খোলা.
2. ডাবল ক্লিক করুন নেটওয়ার্ক অ্যাডাপ্টার এটা প্রসারিত।
3. আপনার উপর ডান ক্লিক করুন চালক (যেমন ইন্টেল(আর) ডুয়াল ব্যান্ড ওয়্যারলেস-এসি 3168) এবং ক্লিক করুন ড্রাইভার আপডেট করুন.
4। ক্লিক করুন ড্রাইভারদের জন্য আমার কম্পিউটার ব্রাউজ করুন to locate and install a driver manually.
5। ক্লিক করুন ব্রাউজার button to choose any directory and click on পরবর্তী.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, The best drivers for your device are already installed.
6। ক্লিক করুন ঘনিষ্ঠ উইন্ডো থেকে প্রস্থান করতে।
7. আবার শুরু the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1। শুরু করা ডিভাইস ম্যানেজার from the Windows search menu.
2. উপর রাইট ক্লিক করুন চালক এবং নির্বাচন করুন আনইনস্টল ডিভাইস.
3. A warning prompt will be displayed on the screen. Check the box “এই ডিভাইসের জন্য ড্রাইভার সফটওয়্যার মুছে দিন” and confirm the prompt by clicking আনইনস্টল.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. দেখুন প্রস্তুতকারকের ওয়েবসাইট.
2. আবিষ্কার এবং ডাউনলোড the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ডাউনলোড করা ফাইল and follow the given instructions to install it.
এছাড়াও পড়ুন: How to set up a VPN on Windows 10
পদ্ধতি 10: উইন্ডোজ আপডেট করুন
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1। প্রেস করুন উইন্ডোজ + আই কী একসাথে খোলার জন্য সেটিংস আপনার কম্পিউটারে.
2। নির্বাচন করা আপডেট এবং সুরক্ষা.
3। নির্বাচন করা হালনাগাদ এর জন্য অনুসন্ধান করুন.
4A. Click এখন ইন্সটল করুন to download and install the latest update available.
4B. If your system is already up-to-date, then it will show আপনি আপ টু ডেট বার্তা।
পদ্ধতি 11: সাম্প্রতিক আপডেটগুলি আনইনস্টল করুন
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. টিপুন এবং ধরে রাখুন উইন্ডোজ + আর কী একসাথে খুলতে চালান সংলাপ বাক্স.
2। আদর্শ appwiz.cpl এবং আঘাত প্রবেশ করান.
3। ক্লিক করুন ইনস্টল আপডেট দেখুন.
4. Select the most recent update and click on আনইনস্টল.
5. Confirm the prompt, if any, and পিসি রিবুট করুন.
এছাড়াও পড়ুন: ফায়ারফক্স লোড হচ্ছে না এমন পৃষ্ঠাগুলি কীভাবে ঠিক করবেন
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the নেটওয়ার্ক অ্যাডাপ্টার installed in your PC along with their settings. All the stored settings are stored to default settings.
বিঃদ্রঃ: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to সেটিংস তারপর পদ্ধতি এবং সম্পর্কে. Once you have reset your network, you have to reinstall all networking software মত ভিপিএন ক্লায়েন্ট or ভার্চুয়াল সুইচ.
1. টিপুন এবং ধরে রাখুন উইন্ডোজ + আই কী একসাথে খোলার জন্য উইন্ডোজ সেটিংস.
2। ক্লিক করুন নেটওয়ার্ক এবং ইন্টারনেট.
3। ক্লিক করুন নেটওয়ার্ক রিসেট অধীনে অবস্থা.
4. ক্লিক করে প্রম্পট নিশ্চিত করুন এখন রিসেট করুন.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
প্রস্তাবিত:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.