When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Zastarjeli operativni sistem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikona.
2. If the status is set to Nije povezano, kliknite na Network globe icon, choose your Wi-Fi network and click on spojiti button. Make sure Režim aviona nije uključeno.
3. If you again face the same network connection error code, then click on the isključiti button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Desnom tipkom miša kliknite Wi-Fi ikona i izaberite Open Network & Internet settings.
6. Kliknite na Wi-Fi.
7. Scroll down the right menu, click on Upravljanje poznatim mrežama.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Zaboraviti.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metod 2: Ponovo pokrenite ruter
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Bilješka: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Pronađite Dugme za napajanje na poleđini vašeg rutera.
2. Pritisnite dugme jednom za ugasi ga.
3. Sada, isključite vaš Router power cable i sačekajte dok se snaga u potpunosti ne isprazni iz kondenzatora.
4. Zatim, reconnect u kabl za napajanje i uključite ga nakon minut.
5. Pričekajte da se mrežna veza ponovo uspostavi i pokušajte se ponovo prijaviti.
Takođe pročitajte: Fix Computers Not Showing Up on Network in Windows 10
3. metod: Pokrenite alat za rješavanje problema s mrežom
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Pritisnite Windows ključ i tip Otkrivanje problema u traci za pretragu i Otvori.
2. Kliknite na Dodatni alati za rješavanje problema.
3. Izaberite Mrežni adapter i kliknite na Pokrenite program za rešavanje problema.
4. Select the network adapter to diagnose i kliknite na sljedeći.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliknite na Zatvorite alat za rješavanje problema.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Takođe pročitajte: Rješavanje problema s porodičnim dijeljenjem YouTube TV-a
Metod 4: Popravi sistemske datoteke
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Servisiranje slika i upravljanje) utilities on your Windows 10 PC.
1. Pritisnite Windows ključ, tip Komandna linija i kliknite na Pokreni kao administrator.
2. Kliknite na Da u Kontrola korisničkih naloga prompt.
3. tip chkdsk C: / f / r / x komanduj i pogodi Enter taster.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y i pogodi Enter taster.
5. Again, type the command: sfc / scannow i pritisnite Enter taster pokrenuti System File Checker skeniranje.
Bilješka: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Windows Resource Protection nije otkrio povrede integriteta.
- Windows Resource Protection could not perform the requested operation.
- Windows Resource Protection found corrupt files and successfully repaired them.
- Windows Resource Protection je pronašao korumpirane fajlove, ali nije uspio popraviti neke od njih.
6. Once the scan is finished, Restart vaš računar.
7. Again, launch Command Prompt kao administrator and execute the given commands one after the other:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Bilješka: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Pritisnite Windows ključ i tip Menadžer uređaja in the Windows search menu. Click on otvoreno.
2. Proširite Mrežni adapteri odjeljak dvostrukim klikom na njega.
3. Desni klik na vaš Mrežni drajver (na primjer, Intel (R) Dual Band Wireless-AC 3168) i izaberite Onemogući uređaj opcija.
4. Confirm the below prompt by clicking on Da.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Omogući uređaj opcija.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Takođe pročitajte: Popravi Windows nije mogao automatski otkriti postavke proxyja ove mreže
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Idite na meni za pretragu i ukucajte cmd. Kliknite na Pokreni kao administrator.
2. Upišite sljedeće komande i pogodi Enter taster.
reset netsh winsock-a netsh int ip reset ipconfig / release ipconfig / obnoviti
3. Pričekajte da se naredbe izvrše i ponovo pokrenite svoj PC.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Pokretanje Komandna linija by searching in the Windows meni and click on Run as administrator.
2. tip ipconfig / flushdns in the command window and hit ući.
Takođe pročitajte: [REŠENO] Windows je otkrio problem sa hard diskom
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Pokrenite trčanje dijalog box pritiskom na Windows + R tasteri zajedno.
2. tip ncpa.cpl i pogodi Enter taster.
3. Right-click on your active mrežni adapter i kliknite na svojstva.
4. Poništite izbor Internet protokol verzija 6 (TCP / IPv6) opcija.
5. Konačno, kliknite na OK to save the changes and check if the issue is resolved.
Bilješka: If you use multiple network connections, navigate to Centar za mrežu i deljenje i Promenite adapter settings. Right-click on the adapter and select Onemogući. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. tip Menadžer uređaja in the Windows search menu and click otvoreno.
2. Dvaput kliknite na Mrežni adapteri da ga proširite.
3. Desni klik na vaš Vozač (npr Intel(R) Dual Band Wireless-AC 3168) i kliknite Update driver.
4. Kliknite na Potražite upravljačke programe na mom računaru to locate and install a driver manually.
5. Kliknite na Pretraživač button to choose any directory and click on sljedeći.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Ako su već u fazi ažuriranja, na ekranu se prikazuje sljedeća poruka, Najbolji drajveri za vaš uređaj su već instalirani.
6. Kliknite na blizu za izlazak iz prozora.
7. Ponovo pokreni the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Pokretanje Menadžer uređaja from the Windows search menu.
2. Desnom tipkom miša kliknite Vozač i izaberite Uninstall uređaj.
3. A warning prompt will be displayed on the screen. Check the box “Izbrišite softver upravljačkog programa za ovaj uređaj” and confirm the prompt by clicking Deinstalirati.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Posjetite web lokacija proizvođača.
2. pronaći i Preuzimanje the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the preuzeta datoteka i slijedite data uputstva da biste ga instalirali.
Takođe pročitajte: Kako postaviti VPN na Windows 10
10. metod: Ažurirajte Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Pritisnite taster Windows+I ključeve zajedno da otvorimo Postavke na računaru.
2. Izaberite Ažuriranje i sigurnost.
3. Izaberite Proverite ažuriranja.
4A. Click Instalirati sada to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Vi ste u toku poruka.
Metoda 11: Deinstalirajte nedavna ažuriranja
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pritisnite i držite Windows + R tasteri zajedno da otvorite trčanje okvir za dijalog.
2. tip appwiz.cpl i pogodi ući.
3. Kliknite na Pregled instaliranih ispravki.
4. Select the most recent update and click on Deinstalirati.
5. Confirm the prompt, if any, and ponovo pokrenite računar.
Takođe pročitajte: Kako popraviti da Firefox ne učitava stranice
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Bilješka: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Postavke onda sistem i Oko. Once you have reset your network, you have to reinstall all networking software kao VPN klijenti or Virtuelni prekidači.
1. Pritisnite i držite Windows + I tasteri zajedno da otvorimo Windows postavke.
2. Kliknite na Mreža i Internet.
3. Kliknite na Mrežni reset pod Status.
4. Confirm the prompt by clicking on Resetuj sada.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Preporučena:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.