Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Ponovo pokrenite i odaberite ispravan problem s uređajem za pokretanje [RJEŠENO]
Metoda 1: Postavite ispravan redoslijed pokretanja
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Kada se vaš računar pokrene (prije pokretanja ekrana ili ekrana s greškom), više puta pritisnite Delete ili tipku F1 ili F2 (u zavisnosti od proizvođača vašeg računara) da uđite u BIOS podešavanje.
2. Kada ste u BIOS podešavanju, izaberite karticu Boot sa liste opcija.
3. Sada se uvjerite da je računar Hard disk ili SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, ako ne onda nastavite.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Da biste pokrenuli dijagnostiku, ponovo pokrenite računar i kada se računar pokrene (pre pokretanja ekrana), pritisnite taster F12 i kada se pojavi meni za pokretanje, označite opciju Boot to Utility Partition ili Diagnostics i pritisnite enter da pokrenete dijagnostiku. Ovo će automatski provjeriti sav hardver vašeg sistema i prijaviti ako se pronađe bilo kakav problem.
Preporučena: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Bitan: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Ubacite Windows 10 instalacioni DVD za pokretanje i ponovo pokrenite računar.
2. Kada se od vas zatraži da pritisnete bilo koji taster za pokretanje sa CD-a ili DVD-a, pritisnite bilo koji taster da nastavite.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Ponovo pokrenite i uspješno ste Fix Reboot and Select Proper Boot Device issue, ako ne, nastavite.
Također, pročitajte Kako da popravite automatsku popravku koja nije mogla popraviti vaš računar.
Metod 5: Omogućite UEFI Boot
1. Ponovo pokrenite računar i tapnite na F2 ili DEL u zavisnosti od računara da biste otvorili postavku pokretanja.
2.The make the following changes:
Promijenite opciju liste pokretanja na UEFI Onemogući opciju Load Legacy ROM Omogući bezbedno pokretanje
3. Dalje, tapnite na F10 da sačuvate i izađete iz podešavanja pokretanja.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Bilješka: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metoda 7: Popravka Instalirajte Windows 10
Ako nijedno od gore navedenih rješenja ne radi za vas, možete biti sigurni da je vaš HDD u redu, ali možda vidite grešku “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” jer su operativni sistem ili BCD informacije na HDD-u nekako izbrisane. Pa, u ovom slučaju, možete pokušati popraviti instalaciju Windowsa, ali ako i ovo ne uspije, jedino preostalo rješenje je instalirati novu kopiju Windowsa (Čista instalacija).
To je to što ste uspjeli popraviti Reboot and Select proper Boot device issue ali ako još uvijek imate pitanja u vezi sa ovom objavom, slobodno ih postavite u odjeljku za komentare.