When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistema operatiu obsolet.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icona.
2. If the status is set to No connectat, feu clic al botó Network globe icon, choose your Wi-Fi network and click on Connecta button. Make sure Mode avió no està activat.
3. If you again face the same network connection error code, then click on the desconnectar button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Feu clic amb el botó dret al ratolí Icona de wifi i seleccionar Open Network & Internet settings.
6. Fer clic a Wi-Fi.
7. Scroll down the right menu, click on Gestioneu xarxes conegudes.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Oblida't.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Mètode 2: reinicieu l'encaminador
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Troba el Botó d'encendre a la part posterior del vostre encaminador.
2. Premeu el botó una vegada per apaga-ho.
3. Ara, desconnectar seva Router power cable i espereu fins que s'esgoti completament l'energia dels condensadors.
4. Llavors, tornar a connectar la cable de corrent i engegueu-lo al cap d'un minut.
5. Espereu fins que es restableixi la connexió de xarxa i prova d'iniciar la sessió de nou.
Llegiu també Fix Computers Not Showing Up on Network in Windows 10
Mètode 3: executeu l'eina de resolució de problemes de xarxa
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Premeu el Clau de Windows i escriviu Configuració de resolució de problemes a la barra de cerca i Obre.
2. Fer clic a Solució de problemes addicionals.
3. Selecciona Adaptador de xarxa i feu clic a Executeu l'eina de resolució de problemes.
4. Select the network adapter to diagnose i feu clic a Següent.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, fer clic a Tanqueu el solucionador de problemes.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Llegiu també Arreglar l'ús compartit familiar de YouTube TV no funciona
Mètode 4: reparació dels fitxers del sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Controlador d'arxius del sistema) /DISM (Desplegament de serveis i gestió d'imatges) utilities on your Windows 10 PC.
1. Premeu el Clau de Windows, escriviu Símbol del sistema i feu clic a Executa com administrador.
2. Fer clic a Sí al Control de comptes d'usuari prompt.
3. Escriviu chkdsk C: / f / r / x comanda i colpeja Introduïu la clau.
4. Si se us demana un missatge, Chkdsk no pot executar-se... el volum està... en procés d'ús, aleshores, escriviu Y i colpeja el Introduïu la clau.
5. De nou, escriviu l'ordre: sfc / scannow i premi Introduïu la clau per executar el Controlador d'arxius del sistema escanejar.
Nota: S'iniciarà una exploració del sistema i trigarà un parell de minuts a acabar. Mentrestant, podeu continuar realitzant altres activitats però tingueu en compte que no tanqueu la finestra accidentalment.
Després de completar l'escaneig, es mostrarà algun d'aquests missatges:
- Windows Resource Protection no ha detectat cap infracció de la integritat.
- Windows Resource Protection no ha pogut realitzar l'operació sol·licitada.
- La Protecció de recursos de Windows ha trobat fitxers corruptes i els ha reparat correctament.
- La Protecció de recursos de Windows ha trobat fitxers corruptes, però no ha pogut solucionar-ne alguns.
6. Un cop finalitzada l'escaneig, reprendre el vostre PC.
7. De nou, llança Indicador d'ordres com a administrador i executeu les ordres donades una darrere l'altra:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /En línia /cleanup-image /startcomponentcleanup
Nota: Heu de tenir una connexió a Internet que funcioni per executar les ordres DISM correctament.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Premeu el Clau de Windows i escriviu Gestor de dispositius in the Windows search menu. Click on obert.
2. Amplieu el Adaptadors de xarxa secció fent doble clic sobre ella.
3. Feu clic amb el botó dret sobre el vostre Controlador de xarxa (per exemple, Intel (R) Dual Band Wireless-AC 3168) I seleccioneu el Desactiva el dispositiu opció.
4. Confirm the below prompt by clicking on Sí.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Activa el dispositiu opció.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Llegiu també Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Aneu al menú de cerca i escriviu cmd. Fer clic a Executa com administrador.
2. Escriviu el següent comandaments i colpeja el Introduïu la clau.
Restabliment de netsh winsock netsh int ip reset ipconfig / release ipconfig / renew
3. Espereu que s'executin les ordres i reinicieu el PC.
Mètode 7: esborra la memòria cau DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Llançament Símbol del sistema by searching in the Windows menu and click on Run as administrator.
2. Escriviu ipconfig / flushdns in the command window and hit Enter.
Llegiu també [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Llançament de la Correr quadre de diàleg prement Tecles Windows + R. junts.
2. Escriviu ncpa.cpl i colpejar Introduïu la clau.
3. Right-click on your active adaptador de xarxa i feu clic a Propietats.
4. Desmarqueu Protocol d'Internet versió 6 (TCP / IPv6) opció.
5. Finalment, feu clic a OK to save the changes and check if the issue is resolved.
Nota: If you use multiple network connections, navigate to Centre de xarxes i recursos compartits i Canvia l’adaptador settings. Right-click on the adapter and select Desactiva. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Escriviu Gestor de dispositius in the Windows search menu and click obert.
2. Feu doble clic a Adaptadors de xarxa per ampliar-lo.
3. Feu clic amb el botó dret sobre el vostre conductor (per exemple Intel(R) Wireless-AC 3168 de banda dual) i feu clic a Actualitza el controlador.
4. Fer clic a Busqueu els conductors a l’ordinador to locate and install a driver manually.
5. Feu clic al browser button to choose any directory and click on Següent.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Si ja estan en una fase d'actualització, la pantalla mostra el missatge següent: Els millors controladors per al vostre dispositiu ja estan instal·lats.
6. Fer clic a a prop per sortir de la finestra.
7. Reinicia the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Llançament Gestor de dispositius from the Windows search menu.
2. Feu clic amb el botó dret al ratolí conductor i seleccionar Desinstal·la el dispositiu.
3. A warning prompt will be displayed on the screen. Check the box “Suprimiu el programari del controlador per a aquest dispositiu” and confirm the prompt by clicking Desinstal.
4. Download and install the drivers on your device either by a manual update or automatic update.
5 Visiteu la pàgina lloc web del fabricant.
2. Cercar i descarregar els controladors corresponents a la versió de Windows del vostre PC.
3. Once downloaded, double click on the fitxer descarregat i seguiu les instruccions donades per instal·lar-lo.
Llegiu també Com configurar una VPN a Windows 10
Mètode 10: actualitzeu Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Premeu el botó Windows+I claus junts per obrir Configuració A l'ordinador.
2. Selecciona Actualització i seguretat.
3. Selecciona Buscar actualitzacions.
4A. Click Instal · lar ara to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Estàs al dia missatge
Mètode 11: desinstal·leu les actualitzacions recents
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Mantingueu premut Tecles Windows + R. junts per obrir Correr Caixa de diàleg.
2. Escriviu appwiz.cpl i colpejar Enter.
3. Fer clic a Mostra les actualitzacions instal·lades.
4. Select the most recent update and click on Desinstal.
5. Confirm the prompt, if any, and reinicieu el PC.
Llegiu també Com arreglar Firefox que no carreguen pàgines
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Configuració llavors Sistema i Qui som?. Once you have reset your network, you have to reinstall all networking software M'agrada Clients VPN or Interruptors virtuals.
1. Mantingueu premut Tecles Windows + I junts per obrir Configuració de Windows.
2. Fer clic a Xarxa i Internet.
3. Fer clic a S'ha reiniciat la xarxa sota Estat.
4. Confirmeu la sol·licitud fent clic a Reinicialitza ara.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recomanat:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.