Sometimes, when you connect to any limited network, you may end up with No internet, secured prompt. So, when you run Network diagnostics tool, the error code 0x00028001 will prompt on the screen. The most common reason for this error code is your network is being connected to a limited WiFi connection network. If you are also facing network error code 0x00028001, this guide will help you resolve the same. So, continue reading.
How to Fix Network Error 0x00028001 on Windows 10
You may wonder why network error 0x00028001 occurs on Windows 10. Here are some valid reasons that trigger this problem in your device.
- Infrastructure failure of your Windows 10 PC.
- Network connection is very bad.
- The cable connecting the router and the modem are damaged or broken.
- Too many people are connected to the same network.
- Wireless interference between router and your device.
- Outdated network drivers.
In this section, we have gathered some potential fixes that will help you fix 0x00028001 error code. Follow as instructed to attain perfect outcomes.
Mubo nga sulat: Kanunay nga siguruha nga maghimo ka usa ka System restore point aron ibalik ang imong PC kung adunay sayup.
Basic Troubleshooting Methods
Follow the basic troubleshooting steps listed below before going through the advanced methods.
1. I-restart ang PC
1. Ipadayon ang Alt + F4 nga mga yawe dungan sa pagbukas sa Isira ang Windows bintana.
2. Pilia ang Pag-restart option and hit the Pagsulod key.
2. Ensure Strong Network Signal
You will not face any connectivity issues in your Windows 10 computer only if you have a strong network connection. If there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems.
1. Ibalhin ang imong router to some other place and check the internet connectivity.
2. Find the signal strength of your network and if it is very low, clear all the obstructions in between the way.
3. Avoid too many devices konektado sa parehas nga network.
4. Likayi ang wireless interference from devices like wireless headphones, head sets, TV and a lot more.
5. Move your PC closer to the router and check if the error recurs again.
3. Pag-restart sa Router
This is a simple work around that will help you fix 0x00028001 error code within simple steps. This also ensures a strong and reliable network connection. Follow the below mentioned steps to restart your router. By doing so, you will establish a fresh internet connection between the client and the server. You can restart your router by following our guide Restart Router or Modem. Once your router has restarted, check if you can have fixed the error.
Basaha usab: Ayuhon ang Walay WiFi Networks nga Makita sa Windows 10
4. Reconnect to Internet
This is another simple workaround that fixes 0x00028001 error code. Your computer must connect either to Ethernet or to Wi-Fi network at a time. Check if this condition applies to your computer and if you guess any interruptions between your wired and wireless connections, reconnect them as instructed below.
1. Pagdili imong koneksyon sa network, paghulat sa makadiyot ug ikonektar kini pag-usab.
2. Kung ang Ethernet cable gisaksak, kuhaa kini gikan sa imong PC. Dayon, ikonektar kini pag-usab o ikonektar kini sa usa ka Wi-Fi network. Kini makasiguro nga walay pagkidlap tali sa wired ug wireless nga mga koneksyon.
5. Disable Airplane Mode
Enabling Airplane mode will disable WiFi, Bluetooth, cellular mode, all radio services, etc. Thus, you are advised to disable airplane mode to fix 0x00028001 error code. Usually, there is a dedicated key on your keyboard to enable or disable Airplane mode. Hit the key to do the same or implement the below-listed instructions.
1. Pagpadayon ug pagpadayon Windows + A keys dungan sa pagbukas Action Center. Susiha kon ang Mode sa eroplano ginabuksan.
2A. If Mode sa eroplano is turned on, click on the setting to turn it off.
2B. If the Mode sa eroplano is not turned on, skip to the next method.
6. Enable Wi-Fi Connection
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face 0x00028001 error code. But, there are a few simple instructions to enable WiFi on your computer.
1. Pagdala ngadto sa run dialog box pinaagi sa pagpindot Mga yawe sa Windows + R sa tingub.
2. Matang ncpa.cpl ug naigo Pagsulod key.
3. Now, right-click on your active adapter sa network and check whether it is enabled or disabled.
3A. Pag-klik sa makapahimo if the status is disabled.
3B. If the status is already in Enable, move to the next method.
Check if you have fixed 0x00028001 error code is fixed.
Basaha usab: How to Troubleshoot Network Connectivity Problems on Windows 10
Method 1: Restart Windows Explorer Process
Some users have reported that restarting Windows Explorer processes will help to resolve 0x00028001 error code. Follow the below-listed instructions to do the same.
1. Hit sa Ctrl + Shift + Esc nga mga yawe dungan sa pagbukas Task Manager.
2. Diha sa Mga proseso tab, i-klik Windows Explorer ug pilia ang Pag-restart button.
3. Now, Windows Explorer restarts and 0x00028001 error code will be fixed now.
Paagi 2: Pagdagan ang Troubleshooter sa Network
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix 0x00028001 error code. Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed 0x00028001 error code.
Basaha usab: Giunsa ang Pag-reset sa Mga Setting sa Network sa Windows 10
Pamaagi 3: Paggawas sa Tanang Proseso sa Background
If there are a bulk of background processes in your Windows 10 computer, you cannot access the network that easy, since all those processes will take a share of the network. Also, RAM consumption will be more and the performance of the device will slow down apparently. Follow our guide How to End Task in Windows 10 to close all other background processes in your Windows 10 PC.
After closing all the background processes, check if 0x00028001 error code is fixed or not.
Pamaagi 4: Pag-ayo sa mga File sa Sistema
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing 0x00028001 error code very recently, there are some chances that your computer files have become corrupt or damaged. Luckily, your Windows 10 PC has inbuilt repair tools like SFC (System File Checker) and DISM (Deployment Image Servicing and Management) that will help you fix all the corrupt files. Read our guide on How to Repair System Files on Windows 10 and follow the steps as instructed to repair all your corrupt files.
Basaha usab: Ayuhon ang Windows 10 Netwtw04.sys Blue Screen Error
Pamaagi 5: Pagdalagan ang Malware Scan
Sudden virus or malware attack will result in network problems in your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer. You are advised to scan your computer as instructed in our guide How do I Run a Virus Scan on my Computer?
Usab, kung gusto nimong tangtangon ang malware sa imong computer, susiha ang among giya Unsaon Pagtangtang sa Malware gikan sa imong PC sa Windows 10.
Pamaagi 6: Pag-update sa Windows
You can also eradicate software side bugs in your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update
Human sa pag-update sa imong Windows Operating System, susiha kon makakonektar ka sa imong network.
Basaha usab: Pag-ayo sa mga Kompyuter nga Wala Nagpakita sa Network sa Windows 10
Method 7: Disable VPN and Proxy Server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face 0x00028001 error code. If you have installed any VPN service or use proxy servers on your PC, read our How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed 0x00028001 error code. Still, if you face the same problem, try connecting to a mobile hotspot.
Method 8: Reset TCP or IP Protocol
Ang TCP (Transmission Control Protocol) usa ka hinungdanon nga protocol sa koneksyon sa network nga naggahin ug nagpaila nga mga lagda ug nga sumbanan mga pamaagi sa internet. Ang mga protocol sa TCP/IP maoy responsable sa pagbalhin sa mga pakete sa datos gikan sa nagpadala ug sa tigdawat. Kung adunay panagsumpaki sa proseso, ang pag-reset sa protocol kauban ang IP address makatabang kanimo sa pag-ayo sa gihisgutan nga isyu. Sunda ang among giya sa Unsaon Pag-troubleshoot sa Network Connectivity Problems on Windows 10 aron ma-reset ang TCP/IP.
After implementing the steps, check if you can fix network keeps dropping or not.
Pamaagi 9: Gamita ang Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix 0x00028001 error code. To do so, follow our guide on How to change DNS settings in Windows 10.
Basaha usab: Giunsa Pagbag-o ang Mga Setting sa DNS Server sa Windows 11
Method 10: Disable Power Saving Mode
Sometimes, you may face 0x00028001 error code if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Hit sa Windows key, matang Device Manager ug i-klik sa Open.
2. Karon, double-click sa Mga adaptor sa network seksyon.
3. Unya, right-click sa imong Network adapter ug pilia ang Properties opsyon sama sa gipakita.
4. Dayon, balhin sa Pagdumala sa Gahum window in the Network adapter properties window and uncheck the box next to Tugoti ang computer sa pagtangtang niini nga device aron sa pagluwas sa gahum.
5. Sa katapusan, i-klik sa OK sa pagluwas sa mga pagbag-o.
Check if you have your computer is out of network connectivity issues.
Method 11: Enable Essential Services
To avoid and prevent 0x00028001 error code occurring in your PC, few essential services must have active status. When there is a problem with any of these services, you will face several conflicts in connecting to a network. Here are a few instructions to check if the essential services are running on your PC.
1. Matang Services sa search box ug i-klik sa Open.
2. Now, scroll down and search for the Windows EventLog serbisyo.
3. Susihon ang Kahimtang sa serbisyo.
3A. Kung ang Kahimtang gibutang sa pagdagan, right-click on the service and select the Hunong option. Wait for a while and then click on pagsugod pag-usab.
3B. If the Kahimtang is dili gibutang sa pagdagan, right-click on the service and select the pagsugod kapilian.
4. Repeat the above steps for the below mga serbisyo usab.
- Tawag sa Layo nga Pamaagi (RPC)
- Windows Update
- DHCP Client
- Network Connected Devices Auto-Setup
- Broker sa Koneksyon sa Network
- Mga Sumpay sa Network
- Network Connectivity Assistant
- Pag-alagad sa Lista sa Network
- Kahibalo sa Lokasyon sa Network
- Network Setup Service
- Serbisyo sa Interface sa Network Store
Finally, check if you have fixed the discussed issue.
Basaha usab: Ang pag-ayo sa Windows dili awtomatik nga makamatikod sa mga setting sa Proxy sa Network
Pamaagi 12: I-disable ang Antivirus Temporaryo (Kung Naa man)
Some incompatible antivirus programs installed in your computer will cause network error 0x00028001 error code. To avoid conflicts, you must ensure the security settings of your Windows 10 computer and check if they are stable or not. To find whether the antivirus suite is the reason for network keeps dropping issue, disable it once and try connecting to a network. Read our guide on How to Disable Antivirus Temporarily on Windows 10 and follow the instructions to disable your Antivirus program temporarily on your PC.
If you did not face any internet connectivity issues after disabling the antivirus program in your computer, you are advised to uninstall the program completely from your PC. Read our guide Force Uninstall Programs which won’t Uninstall In Windows 10 to uninstall your antivirus program in your computer.
Pamaagi 13: I-disable ang Windows Defender Firewall (Dili Girekomenda)
Like antivirus program, Windows Defender Firewall in your computer might prevent internet access, for some security reasons. If in case, WiFi network has been blocked by Windows Defender Firewall, you have to enable it or disable the Firewall securities temporarily from your computer. If you do not know how to disable Windows Defender Firewall, our guide How to Disable Windows 10 Firewall will help you do so.
Pamaagi 14: Pag-update sa Driver sa Network
Siguruha kanunay kung naggamit ka bag-ong mga driver sa network ug kung adunay bisan unsang mga update nga naghulat sa aksyon, gitambagan ka nga i-download ug i-install ang parehas. Sunda ang among giya sa Unsaon Pag-update sa Mga Driver sa Network Adapter sa Windows 10 aron mahimo kini. Kung na-update na nimo ang imong driver sa network, reboot your computer and test the network connection. You will not 0x00028001 error code again.
Basaha usab: Pag-ayo sa Ethernet Wala'y Balod nga IP Configuration Error
Pamaagi 15: I-install pag-usab ang Driver sa Network
Still, if you face 0x00028001 error code even after updating network drivers, there is another fix to delete all the drivers in your computer and reinstall them again. This process stabilizes the network connectivity problems thereby resolving network keeps disconnecting Windows 10 issue. Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 to reinstall drivers in your Windows 10 computer.
Human ma-install pag-usab ang mga driver sa network, susiha kung makakonekta ka sa network nga wala’y mga problema.
Pamaagi 16: Roll Back Network Drivers
All the current versions drivers will be deleted from your PC and previous version of them will be installed when you roll back your network drivers. This is a helpful feature when any new driver is incompatible with the system. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix 0x00028001 error code.
Pagkahuman sa imong Windows 10 na-install sa kompyuter ang miaging bersyon sa mga drayber, susiha kung makakonekta ba sa network nga wala’y bisan unsang pagkabalda.
Pamaagi 17: I-reset ang Mga Setting sa Network
Daghang mga tiggamit ang nagpahayag nga, ang pag-reset sa mga setting sa network makasulbad sa mga katingad-an nga isyu sa koneksyon sa network. Kini nga pamaagi makalimot sa tanang network configuration settings, save credentials, ug daghan pang security software sama sa VPN ug antivirus programs. Aron mahimo kini, sunda ang among giya sa Giunsa Pag-reset ang Mga Setting sa Network sa Windows 10
Basaha usab: How to Setup Network Files Sharing on Windows 10
Paagi 18: Himua ang Pagpahiuli sa Sistema
If you have recently updated your Windows 10 operating system and later facing network error 0x00028001 error code, the latest Windows update components may interfere with any software present in your computer and may cause network keeps disconnecting Windows 10 issue. So, in this case, you must restore your computer to the previous version when it was working fine. To do so, follow our guide on How to use System Restore on Windows 10 and implement the instructions as demonstrated.
After restoring your Windows 10 PC, check if you can connect to any network without any problems.
Pamaagi 19: I-reset ang PC
If none of the methods have helped you fix 0x00028001 error code, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Method 20: Contact Internet Service Provider
Last but not the least, you have to seek for technical support if above-listed methods fail to resolve network error 0x00028001 error. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device.
For instance, when you try to register your modem but face troubles during the process, several authentication attempts will slow down your network connection. This will lead to 0x00028001 error. So, in this case you have to contact your Internet Service Provider to diagnose and resolve the problem. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
girekomendar:
Kami nanghinaut nga kini nga giya nakatabang ug mahimo nimong ayohon network error 0x00028001 in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.