When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Sistema Operativu obsoleto.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icona.
2. If the status is set to Micca cunnessu, cliccà nantu à u Network globe icon, choose your Wi-Fi network and click on cunnette button. Make sure Modu Avagliu ùn hè micca accesa.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Cliccate cù u dirittu nantu à u Icona di Wi-Fi è selezziunate Open Network & Internet settings.
6. Cliccate nant'à Wi-Fi.
7. Scroll down the right menu, click on Gestisce e rete cunnisciute.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Dimenticate.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metudu 2: Restart Router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Trova l ' Power button at the back of your router.
2. Press the button once to spegne lu.
3. Avà, disconnect vostri Router power cable è aspittà finu à chì u putere hè sanu sanu drenatu da i capacitors.
4. Dopu, riconnessione l cable di alimentazione è accende dopu un minutu.
5. Wait until the network connection is re-established and try signing in again.
Also Read: Fix Computers Not Showing Up on Network in Windows 10
Mètudu 3: Run Run Troubleshooter
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Colpite u Windows key è tipu Configurazioni di prublema di prublemi in a barra di ricerca è Apertu.
2. Cliccate nant'à Troubleshooting supplementari.
3. Select Adapter di Rete è cliccà nantu Corre u situatore.
4. Select the network adapter to diagnose è cliccà nantu Next.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, cliccate puru Chiudi u prublema di prublema.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Also Read: Fix Family Sharing YouTube TV ùn funziona micca
Metudu 4: riparà i schedarii di u sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistema di Verificante di Schedariu) /DISM (Implacement Image Servicing and Management) utilities on your Windows 10 PC.
1. Colpite u Windows key, tipu Command Prompt è cliccà nantu Executà cum'è amministratore.
2. Cliccate nant'à Iè in u Control di Cunsigliu d'Usuariu prompt.
3. Type chkdsk C: / f / r / x cumanda è culpisce Intra chjave.
4. Sè vo site dumandatu cù un missaghju, Chkdsk ùn pò micca eseguisce ... u voluminu hè ... in prucessu di usu, poi, scrivite Y e culpisce u Intra chjave.
5. In novu, scrivite u cumandamentu: sfc / scannow È stampa Intra chjave a curriri lu Sistema di Verificante di Schedariu scansà.
nota: Una scansione di u sistema serà iniziata è duverà un paru di minuti per finisce. Intantu, pudete cuntinuà à realizà altre attività, ma esse attenti à ùn chjude micca accidentalmente a finestra.
Dopu à compie a scansione, vi mustrarà unu di sti missaghji:
- A Prutezzione di e Risorse di Windows ùn hà trovu alcuna violazione di l'integrità.
- A Proteczione di Risorse Windows ùn pudia micca fà l'operazione dumandata.
- A Proteczione di Risorse di Windows hà truvatu i fugliali corrupti è li hà riparatu cù successu.
- A Proteczione di Risorse di Windows hà trovu i fugliali corrotti, ma ùn hà micca pussutu risolve alcuni di elli.
6. Una volta u scan hè finitu, restituisce u vostru PC.
7. Una volta, lanciari Invitu di cumandamentu cum'è amministratore è eseguite i cumandamenti datu unu dopu l'altru:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
nota: Duvete avè una cunnessione Internet chì funziona per eseguisce i cumandamenti DISM bè.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Colpite u Windows key è tipu Dispożitu Manager in the Windows search menu. Click on Open.
2. Espandi u Accessori di rete sezione clicchendu doppiu sopra.
3. Right-cliccate nant'à u vostru Driver di rete (per esempiu, Intel (R) Dual Band Wireless-AC 3168) è selezziunate u Disattivà u dispositiu funziunalità.
4. Confirm the below prompt by clicking on Iè.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Hà attivatu u dispositivu funziunalità.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Also Read: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Andà à u menù di ricerca è tipu cmd. Cliccate nant'à Executà cum'è amministratore.
2. Type i seguenti cumandamenti e culpisce u Intra chjave.
netsh winsock resettore netsh int ip reset ipconfig / liberazione ipconfig / rinforza
3. Aspettate di i cumandamenti per esse eseguitu è rilancià u vostru PC.
Metudu 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Launch Command Prompt by searching in the Windows Menu and click on Run as administrator.
2. Type ipconfig / flushdns in the command window and hit Rinsignate.
Also Read: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lanciate u Run finestra di dialogu pressendu Chjave Windows + R nsemmula.
2. Type ncpa.cpl è cumbattu Intra chjave.
3. Right-click on your active adattatore di rete è cliccà nantu Joint.
4. Uncheck u Versione di Protocollu Internet 6 (TCP / IPv6) funziunalità.
5. Infine, cliccate nant'à OK to save the changes and check if the issue is resolved.
nota: If you use multiple network connections, navigate to Reta è culturale Sharing e Cambia adattatore settings. Right-click on the adapter and select Disable. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Dispożitu Manager in the Windows search menu and click Open.
2. Doppiu cliccà nant'à u Accessori di rete espansione.
3. Right-cliccate nant'à u vostru mutori (per esempiu Intel(R) Dual Band Wireless-AC 3168) è cliccate Prughjettu di l'aghjuntu.
4. Cliccate nant'à Sfoglia u mo urdinatore per i cunduttori to locate and install a driver manually.
5. Cliccate nantu à u navigatore button to choose any directory and click on Next.
5A. The drivers will be updated to the latest version if they are not updated.
5B. S'elli sò digià in una tappa aghjurnata, u screnu mostra u missaghju seguente, I migliori driver per u vostru dispositivu sò digià stallati.
6. Cliccate nant'à chiudi per surtite da a finestra.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Launch Dispożitu Manager from the Windows search menu.
2. Cliccate cù u dirittu nantu à u mutori è selezziunate Uninstall device.
3. A warning prompt will be displayed on the screen. Check the box “Elimineu u prugrammu di u cuntrollu per st'agile” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Visitate u situ di u fabricatore.
2. truvà e Download i cunduttori chì currispondenu à a versione di Windows in u vostru PC.
3. Once downloaded, double click on the schedariu telecaricatu è seguità i instructions, datu à stallà lu.
Also Read: Cumu stabilisce una VPN in Windows 10
Metudu 10: Update Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Premete u Windows + I chjavi inseme per apre taliata in u vostru urdinatore.
2. Select Actualizazione è Sicurezza.
3. Select Verificate per aghjurnamenti.
4A. Click Installa issa per scaricà è stallà l'ultima aghjurnazione dispunibule.
4B. Sè u vostru sistema hè digià up-to-date, allura vi mustrarà Siate à ghjornu missaghju.
Metudu 11: Uninstall Updates recenti
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pulsà è mantene Chjave Windows + R inseme per apre u Run box di dialogu.
2. Type appwiz.cpl è cumbattu Rinsignate.
3. Cliccate nant'à Vede l'aggiornamenti installati.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and riavvia u PC.
Also Read: Cumu risolve Firefox chì ùn carica micca e pagine
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to taliata tandu System e prupòsitu di lu. Once you have reset your network, you have to reinstall all networking software cum'è Clienti VPN or Interruttori virtuali.
1. Pulsà è mantene Tasti Windows + I inseme per apre Windows Settings.
2. Cliccate nant'à Rete è Internet.
3. Cliccate nant'à Restaurazione di rete sottu Status.
4. Cunfirmà u prompt clicchendu nant'à Riterno issa.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
ricumandatu:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.