Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Riavvia è sceglite l'issue di u dispositivu di boot propiu [RISOLU]
Metudu 1: Configurate l'Ordine di Boot Currettu
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Quandu u vostru urdinatore principia (Prima di a pantalla di boot o di a pantalla d'errore), appughjà ripetutamente Elimina o chjave F1 o F2 (Sicondu u fabricatore di u vostru urdinatore) entre in a configurazione di u BIOS.
2.Una volta chì site in a configurazione di u BIOS, selezziunate a tabulazione Boot da a lista di l'opzioni.
3.Now verificate chì l'urdinatore U discu duru o SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, se micca allora cuntinuà.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Per eseguisce Diagnostics, riavvia u vostru PC è cum'è l'urdinatore principia (prima di a pantalla di boot), premete a chjave F12 è quandu u menù di Boot appare, evidenziate l'opzione Boot to Utility Partition o l'opzione Diagnostics è premete enter per inizià a Diagnostics. Questu verificarà automaticamente tuttu u hardware di u vostru sistema è riporterà se truvate qualchì prublema.
ricumandatu: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
impurtante: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1.Insert u Windows 10 DVD d'installazione bootable è ripigliate u vostru PC.
2.When dumandatu à Press ogni chjave à boot da CD o DVD, appughjà ogni chjave à cuntinuà.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8.Restart è avete successu Fix Reboot and Select Proper Boot Device issue, se no, cuntinuà.
Inoltre, leghjite How to fix Automatic Repair ùn pudia micca riparà u vostru PC.
Metudu 5: Abilita UEFI Boot
1. Riavvia u vostru PC è toccu F2 o DEL secondu u vostru PC per apre u Boot Setup.
2.The make the following changes:
Cambia l'opzione di lista di boot in UEFI Disable Load Legacy option ROM Abilita l'avvio sicuru
3.Next, tu m'aimais F10 à Salvà è Esci da u setup boot.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
nota: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metudu 7: Riparazione Installa Windows 10
Se nimu di a suluzione sopra vi funziona per voi allora pudete esse sicuru chì u vostru HDD hè bè, ma pudete vede l'errore "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key" perchè u sistema operatore o l'infurmazioni BCD nantu à u HDD sò stati in qualchì modu sguassati. Ebbè, in questu casu, pudete pruvà à riparà installà Windows, ma s'ellu hè ancu fallutu, allora l'unica soluzione resta hè di installà una nova copia di Windows (Clean Install).
Hè ciò chì avete successu Fix Reboot and Select proper Boot device issue but if you still have any queries regarding this post feel free to ask them in the comment’s section.