Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Error 1962: No operating system found. Boot sequence will automatically repeat.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Error 1962: No Operating System Found [SOLVED]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Poznámka: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Metoda 1: Spusťte automatickou opravu/opravu při spuštění
1. Vložte spouštěcí instalační DVD systému Windows 10 a restartujte počítač.
2. Až budete vyzváni ke spuštění z disku CD nebo DVD stisknutím libovolné klávesy, pokračujte stisknutím libovolné klávesy.
3. Vyberte předvolby jazyka a klikněte na Další. Klepněte na tlačítko Opravit váš počítač vlevo dole.
4. Na obrazovce výběru možností klepněte na Poradce při potížích.
5. Na obrazovce Odstraňování problémů klepněte na Pokročilá volba.
6. Na obrazovce Rozšířené možnosti klepněte na Automatická oprava nebo oprava spuštění.
7. Počkejte, až se Automatické opravy/Opravy spouštění systému Windows kompletní.
8. Restartujte a máte úspěšně Fix Error 1962 No Operating System Found.
Také si přečtěte Jak opravit Automatická oprava nemohla opravit váš počítač.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Chcete-li spustit diagnostiku, restartujte počítač a při spouštění počítače (před spouštěcí obrazovkou) stiskněte klávesu F12 a když se zobrazí nabídka Boot, zvýrazněte možnost Boot to Utility Partition nebo možnost Diagnostics a stisknutím klávesy Enter spusťte diagnostiku. Tím se automaticky zkontroluje veškerý hardware vašeho systému a v případě zjištění problému vás oznámí.
Method 3: Set correct boot order
You may be seeing the “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Když se počítač spustí (před spouštěcí obrazovkou nebo chybovou obrazovkou), opakovaně stiskněte klávesu Delete nebo F1 nebo F2 (v závislosti na výrobci vašeho počítače). vstupte do nastavení BIOSu.
2. Jakmile jste v nastavení systému BIOS, vyberte ze seznamu možností kartu Boot.
3.Nyní se ujistěte, že počítač Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Primární spouštěcí sekvence
CSM: [Povolit]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Press F10 to save and exit changes in the BIOS setup.
Metoda 4: Povolte spouštění UEFI
Most UEFI firmware (Unified Extensible firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Změňte volbu Boot list na UEFI Disable Load Legacy option ROM Enable Secure boot
3. Dále klepněte na F10 pro uložení a ukončení nastavení spouštění.
Method 5: Restore your PC using Recovery Disc
1.Put in the Windows installation media or Recovery Drive/System Repair Disc and select your ljazykové preferencea klepněte na tlačítko Další
2.Click Opravy váš počítač ve spodní části.
3.Now choose Poradce při potížích a pak Pokročilé možnosti.
4..Finally, click on “Obnovení systému” and follow onscreen instructions to complete the restore.
5.Restart your PC and this step may have Fix Error 1962 No Operating System Found.
Metoda 6: Oprava Instalace systému Windows 10
Pokud pro vás žádné z výše uvedených řešení nefunguje, můžete si být jisti, že je váš HDD v pořádku, ale může se vám zobrazit chyba „Error 1962 No Operating System Found” protože operační systém nebo informace BCD na HDD byly nějakým způsobem vymazány. V tomto případě se můžete pokusit Opravit instalaci systému Windows, ale pokud se to také nezdaří, zbývá jediné řešení – nainstalovat novou kopii systému Windows (Čistá instalace).
Doporučeno pro tebe:
To máte úspěšně za sebou Fix Error 1962: No Operating System Found ale pokud máte stále nějaké dotazy týkající se této příručky, neváhejte se jich zeptat v sekci komentářů.