When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus nebo malware útok.
- Zastaralý operační systém.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikona.
2. If the status is set to Nepřipojený, kliknout na Network globe icon, choose your Wi-Fi network and click on mítinky Connect button. Make sure Režim Letadlo není zapnuto.
3. If you again face the same network connection error code, then click on the Odpojit button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Klepněte pravým tlačítkem na ikonu Ikona Wi-Fi a zvolte Otevřete Nastavení sítě a internetu.
6. Klikněte na Wi-Fi.
7. Scroll down the right menu, click on Správa známých sítí.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Zapomenout.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metoda 2: Restartujte router
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Poznámka: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Najít tlačítko napájení na zadní straně vašeho routeru.
2. Stiskněte jednou tlačítko vypněte jej.
3. Nyní, odpojit váš Router power cable a počkejte, až se z kondenzátorů úplně vybije energie.
4. Potom znovu ο napájecí kabel a po minutě jej zapněte.
5. Počkejte na obnovení síťového připojení a zkuste se přihlásit znovu.
Také čtení: Fix Computers Not Showing Up on Network in Windows 10
Metoda 3: Spusťte Poradce při potížích se sítí
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Zasáhnout Klávesa Windows a typ Odstraňování problémů s nastavením do vyhledávací lišty a Otevřít.
2. Klikněte na Další nástroje pro odstraňování problémů.
3. vybrat Síťový adaptér a klepněte na tlačítko Spusťte nástroj pro odstraňování problémů.
4. Select the network adapter to diagnose a klepněte na tlačítko další.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Odstraňování problémů nedokázalo identifikovat problém, klikněte na Zavřete nástroj pro odstraňování problémů.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Také čtení: Oprava rodinného sdílení YouTube TV nefunguje
Metoda 4: Oprava systémových souborů
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (System File Checker) /DISM (Servis a správa nasazení obrazu) utilities on your Windows 10 PC.
1. Zasáhnout Klávesa Windows, typ Příkazový řádek a klepněte na tlačítko Spustit jako správce.
2. Klikněte na Ano v Řízení uživatelských účtů výzva.
3. Typ chkdsk C: / f / r / x poroučet a udeřit Enter.
4. If you are prompted with a message, Chkdsk cannot run…the volume is… in use process, then, type Y a stiskněte Enter.
5. Again, type the command: sfc / scannow a stiskněte Enter spustit System File Checker skenovat.
Poznámka: A system scan will be initiated and it will take a couple of minutes to finish. Meanwhile, you can continue performing other activities but be mindful of not accidentally closing the window.
After completing the scan, it will show either of these messages:
- Ochrana prostředků Windows nezjistila žádné narušení integrity.
- Program Windows Resource Protection nemohl provést požadovanou operaci.
- Ochrana zdrojů Windows nalezla poškozené soubory a úspěšně je opravila.
- Služba Windows Resource Protection nalezla poškozené soubory, ale některé z nich nebyla schopna opravit.
6. Once the scan is finished, znovu počítače.
7. Again, launch Příkazový řádek jako správce and execute the given commands one after the other:
dism.exe /Online /vyčištění-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Poznámka: You must have a working internet connection to execute DISM commands properly.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Zasáhnout Klávesa Windows a typ Device Manager in the Windows search menu. Click on Otevřená.
2. Rozbalte Síťové adaptéry sekce tak, že na ni dvakrát kliknete.
3. Klepněte pravým tlačítkem myši na svůj síťový ovladač (například, Intel (R) Dual Band Wireless-AC 3168) A vyberte položku Zakázat zařízení volba.
4. Confirm the below prompt by clicking on Ano.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Povolit zařízení volba.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Také čtení: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Přejděte do nabídky vyhledávání a zadejte cmd. Klikněte na Spustit jako správce.
2. Napište následující Příkazy a stiskněte Enter.
netsh winsock reset netsh int ip resetu ipconfig / release ipconfig / renew
3. Počkejte na provedení příkazů a restartujte počítač.
Metoda 7: Vyprázdnění mezipaměti DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Zahájení Příkazový řádek by searching in the Windows menu and click on Run as administrator.
2. Typ ipconfig / flushdns v příkazovém okně a stiskněte vstoupit.
Také čtení: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Spusťte Běh dialogové okno stisknutím Klávesy Windows + R. dohromady.
2. Typ ncpa.cpl a hit Enter.
3. Right-click on your active síťový adaptér a klepněte na tlačítko Nemovitosti.
4. Zrušte zaškrtnutí políčka Internetový protokol verze 6 (TCP / IPv6) volba.
5. Nakonec klikněte na OK to save the changes and check if the issue is resolved.
Poznámka: If you use multiple network connections, navigate to Centrum sítí a sdílení a Vyměňte adaptér settings. Right-click on the adapter and select Zakázat. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Typ Device Manager in the Windows search menu and click Otevřená.
2. Dvakrát klikněte na Síťové adaptéry rozbalit.
3. Klepněte pravým tlačítkem myši na svůj řidič (např Intel (R) Dual Band Wireless-AC 3168) a klikněte na Aktualizovat ovladač.
4. Klikněte na Vyhledejte ovladače v počítači to locate and install a driver manually.
5. Klikněte na prohlížeč button to choose any directory and click on další.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Pokud jsou již ve fázi aktualizace, na obrazovce se zobrazí následující zpráva, Nejlepší ovladače pro vaše zařízení jsou již nainstalovány.
6. Klikněte na zavřít okno opustíte.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Zahájení Device Manager from the Windows search menu.
2. Klepněte pravým tlačítkem na ikonu řidič a zvolte Odinstalujte zařízení.
3. A warning prompt will be displayed on the screen. Check the box “Odstraňte software ovladače pro toto zařízení” and confirm the prompt by clicking Odinstalovat.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Navštivte webové stránky výrobce.
2. Najít a Ke stažení the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the stažený soubor a nainstalujte jej podle uvedených pokynů.
Také čtení: Jak nastavit VPN na Windows 10
Metoda 10: Aktualizujte systém Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. zmáčkni Windows + I klíče společně otevřít Nastavení v počítači.
2. vybrat Aktualizace a zabezpečení.
3. vybrat Zkontrolovat aktualizace.
4A. Click Instalovat nyní to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Jste aktuální zpráva.
Metoda 11: Odinstalujte poslední aktualizace
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. stiskněte a podržte Klávesy Windows + R. společně otevřít Běh dialogové okno.
2. Typ appwiz.cpl a hit vstoupit.
3. Klikněte na Zobrazit nainstalované aktualizace.
4. Select the most recent update and click on Odinstalovat.
5. Confirm the prompt, if any, and restartujte PC.
Také čtení: Jak opravit Firefox nenačítání stránek
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the síťové adaptéry installed in your PC along with their settings. All the stored settings are stored to default settings.
Poznámka: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Nastavení pak Systém a O Nás. Once you have reset your network, you have to reinstall all síťový software jako VPN klienti or Virtuální přepínače.
1. stiskněte a podržte Klávesy Windows + I. společně otevřít Nastavení systému Windows.
2. Klikněte na Síť a internet.
3. Klikněte na Síťový reset pod Status.
4. Potvrďte výzvu kliknutím na Obnovit nyní.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Doporučená:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.