Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Restartujte a vyberte správné zaváděcí zařízení
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Restartujte a vyberte problém správného spouštěcího zařízení [VYŘEŠENO]
Method 1: Set Correct Boot Order
Možná se vám zobrazuje chyba „Restartujte a vyberte správné zaváděcí zařízení” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Když se počítač spustí (před spouštěcí obrazovkou nebo chybovou obrazovkou), opakovaně stiskněte klávesu Delete nebo F1 nebo F2 (v závislosti na výrobci vašeho počítače). vstupte do nastavení BIOSu.
2. Jakmile jste v nastavení systému BIOS, vyberte ze seznamu možností kartu Boot.
3.Nyní se ujistěte, že počítač Pevný disk nebo SSD je nastavena jako nejvyšší priorita v pořadí spouštění. Pokud ne, použijte klávesy se šipkami nahoru nebo dolů k nastavení pevného disku nahoru, což znamená, že počítač se nejprve spustí z něj, nikoli z jakéhokoli jiného zdroje.
4. Nakonec stiskněte F10 pro uložení této změny a ukončení. Tohle musí mít Fix Reboot and Select Proper Boot Device Issue, pokud ne, pokračujte.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Chcete-li spustit diagnostiku, restartujte počítač a při spouštění počítače (před spouštěcí obrazovkou) stiskněte klávesu F12 a když se zobrazí nabídka Boot, zvýrazněte možnost Boot to Utility Partition nebo možnost Diagnostics a stisknutím klávesy Enter spusťte diagnostiku. Tím se automaticky zkontroluje veškerý hardware vašeho systému a v případě zjištění problému vás oznámí.
Doporučená: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
důležité: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Vložte spouštěcí instalační DVD systému Windows 10 a restartujte počítač.
2. Až budete vyzváni ke spuštění z disku CD nebo DVD stisknutím libovolné klávesy, pokračujte stisknutím libovolné klávesy.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Restartujte a máte úspěšně Fix Reboot and Select Proper Boot Device issue, if not, continue.
Přečtěte si také Jak opravit, že automatická oprava nemohla opravit váš počítač.
Method 5: Enable UEFI Boot
1. Restartujte počítač a klepnutím na F2 nebo DEL v závislosti na počítači otevřete Nastavení spouštění.
2.The make the following changes:
Change Boot list option to UEFI Disable Load Legacy option ROM Enable Secure boot
3.Next, tap F10 to Save and Exit the boot setup.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Poznámka: Vždy označte oddíl vyhrazený systémem (obvykle 100 MB) jako aktivní a pokud nemáte oddíl vyhrazený systémem, označte jako aktivní oddíl C: Drive.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Metoda 7: Oprava Instalace systému Windows 10
If none of the above solution work for you then you can be sure that your HDD is fine but you may be seeing the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” because the operating system or the BCD information on the HDD was somehow erased. Well, in this case, you can try to Repair install Windows but if this also fails then the only solution left is to Install a new copy of Windows (Clean Install).
To máte úspěšně za sebou Opravit Reboot and Select proper Boot device issue ale pokud máte stále nějaké dotazy týkající se tohoto příspěvku, neváhejte se jich zeptat v sekci komentářů.