Chwefror 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Gwnewch yn siŵr eich bod chi'n creu pwynt adfer, rhag ofn i rywbeth fynd o'i le.

Nodyn: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Dull 1: Diffodd Cychwyn Cyflym

1.Press Windows Key + R yna teipiwch reolaeth a tharo Enter i agor Panel Rheoli.

panel rheoli

2.Cliciwch ymlaen Hardware a Sain yna cliciwch ar Opsiynau Power.

opsiynau pŵer yn y panel rheoli

3.Yna o'r cwarel ffenestr chwith dewiswch “Dewiswch beth mae'r botymau pŵer yn ei wneud."

dewiswch yr hyn y mae'r botymau pŵer yn ei wneud nad yw usb yn cael ei drwsio

4.Nawr cliciwch ar “Newid y lleoliadau nad ydynt ar gael ar hyn o bryd."

newid gosodiadau nad ydynt ar gael ar hyn o bryd

5.Dad-diciwch “Trowch ar y dechrau cyflym” a chliciwch ar Cadw newidiadau.

Dad-diciwch Trowch ymlaen cychwyn cyflym

Dull 2: Rhedeg Atgyweirio Awtomatig

1.Mewnosodwch y DVD gosod bootable Windows 10 ac ailgychwyn eich cyfrifiadur.

2.When prompted to Pwyswch unrhyw allwedd i gychwyn o CD neu DVD, pwyswch unrhyw fysell i barhau.

Pwyswch unrhyw allwedd i gist o CD neu DVD

3.Dewiswch eich dewisiadau iaith, a chliciwch ar Next. Cliciwch Atgyweirio eich cyfrifiadur yn y gwaelod chwith.

Atgyweirio eich cyfrifiadur

4.On dewis sgrin opsiwn, cliciwch Troubleshoot.

Dewiswch opsiwn yn ffenestri 10 atgyweirio cychwyn awtomatig

5.On Troubleshoot sgrin, cliciwch Opsiwn uwch.

dewiswch opsiwn uwch o'r sgrin datrys problemau

6.Ar y sgrin opsiynau Uwch, cliciwch Atgyweirio Awtomatig neu Atgyweirio Cychwyn.

rhedeg atgyweirio awtomatig

7.Arhoswch nes y Windows Awtomatig/Atgyweiriadau Cychwyn cyflawn.

8.Restart a ydych wedi llwyddo Fix Computer does not start until restarted multiple times issue, os na, parhewch.

Hefyd, darllenwch Sut i drwsio Atgyweirio Awtomatig ni allai atgyweirio'ch PC.

Dull 3: Ailosod BIOS i osodiadau diofyn

1.Turn oddi ar eich gliniadur, yna ei droi ymlaen ac ar yr un pryd pwyswch F2, DEL neu F12 (yn dibynnu ar eich gwneuthurwr) i fynd i mewn Gosodiad BIOS.

pwyswch allwedd DEL neu F2 i fynd i mewn i Gosodiad BIOS

2.Now you’ll need to find the reset option to llwythwch y ffurfweddiad diofyn a gellir ei enwi fel Ailosod i ddiofyn, Llwytho rhagosodiadau ffatri, Clirio gosodiadau BIOS, rhagosodiadau gosod Llwytho, neu rywbeth tebyg.

llwythwch y cyfluniad rhagosodedig yn BIOS

3.Select it with your arrow keys, press Enter, and confirm the operation. Your BIOS yn awr yn defnyddio ei gosodiadau diofyn.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Gwiriwch a yw Disg Caled Cyfrifiadur wedi'i gysylltu'n iawn

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Dull 5: Gwirio Cyflenwad Pŵer

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Cyflenwad Pwer Diffygiol

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Dull 7: Ailosod ATX

Nodyn: Mae'r broses hon yn berthnasol yn gyffredinol i liniaduron, felly os oes gennych gyfrifiadur yna gadewch y dull hwn.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2.Nawr dileu'r batri o'r tu ôl a phwyso a dal y botwm pŵer am 15-20 eiliad.

dad-blygiwch eich batri

Nodyn: Peidiwch â chysylltu'r llinyn pŵer eto, byddwn yn dweud wrthych pryd i wneud hynny.

3.Now plug in eich llinyn pŵer (ni ddylid gosod batri) a cheisio cychwyn eich gliniadur.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Argymhellir:

Dyna chi wedi llwyddo Fix Computer does not start until restarted multiple times issue ond os oes gennych unrhyw ymholiadau o hyd ynglŷn â'r canllaw hwn mae croeso i chi eu holi yn yr adran sylwadau.