When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- System Weithredu wedi dyddio.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe icon.
2. If the status is set to Heb gysylltiad, cliciwch ar y Network globe icon, choose your Wi-Fi network and click on Cyswllt button. Make sure Modd yr awyren ddim yn cael ei droi ymlaen.
3. If you again face the same network connection error code, then click on the datgysylltu button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. De-gliciwch ar y Eicon Wi-Fi a dewis Open Network & Internet settings.
6. Cliciwch ar Wi-Fi.
7. Scroll down the right menu, click on Rheoli rhwydweithiau hysbys.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Anghofiwch.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Dull 2: Ailgychwyn Llwybrydd
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nodyn: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Dewch o hyd i'r Pŵer botwm yng nghefn eich llwybrydd.
2. Pwyswch y botwm unwaith i ei ddiffodd.
3. Nawr, datgysylltu eich Router power cable ac aros nes bod y pŵer wedi'i ddraenio'n llwyr o'r cynwysyddion.
4. Yna, ailgysylltu y gebl pŵer a'i droi ymlaen ar ôl munud.
5. aros nes bod y cysylltiad rhwydwaith yn cael ei ail-sefydlu a ceisiwch fewngofnodi eto.
Darllenwch hefyd: Trwsio Cyfrifiaduron nad ydynt yn Dangos Ar y Rhwydwaith yn Windows 10
Dull 3: Rhedeg Datrys Problemau Rhwydwaith
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Taro'r Allwedd Windows a math Gosodiadau Troubleshoot yn y bar chwilio a Ar agor.
2. Cliciwch ar Datryswyr problemau ychwanegol.
3. Dewiswch Rhwydwaith adapter a chliciwch ar Rhedeg y datryswr trafferthion.
4. Select the network adapter to diagnose a chliciwch ar Digwyddiadau.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, cliciwch ar Caewch y datryswr problemau.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Darllenwch hefyd: Trwsio Teulu Rhannu Teledu YouTube Ddim yn Gweithio
Dull 4: Atgyweirio Ffeiliau System
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Gwiriwr Ffeil System) /DISM (Delwedd Delweddu Gwasanaethu a Rheoli) utilities on your Windows 10 PC.
1. Taro'r Allwedd Windows, math Gorchymyn 'n Barod a chliciwch ar Rhedeg fel gweinyddwr.
2. Cliciwch ar Ydy yn y Ddefnyddiwr Adla yn brydlon.
3. Math chkdsk C: / f / r / x gorchymyn a daro Rhowch allwedd.
4. Os gofynnir i chi am neges, Ni all Chkdsk redeg ... mae'r gyfrol yn ... yn y broses o ddefnyddio, yna, math Y a glanio ar y Rhowch allwedd.
5. Unwaith eto, teipiwch y gorchymyn: sfc / scannow ac yn y wasg Rhowch allwedd i redeg y Gwiriwr Ffeil System sgan.
Nodyn: Bydd sgan system yn cael ei gychwyn a bydd yn cymryd ychydig funudau i orffen. Yn y cyfamser, gallwch barhau i berfformio gweithgareddau eraill ond byddwch yn ymwybodol o beidio â chau'r ffenestr yn ddamweiniol.
Ar ôl cwblhau'r sgan, bydd yn dangos y naill neu'r llall o'r negeseuon hyn:
- Ni chanfu Diogelu Adnoddau Windows unrhyw droseddau uniondeb.
- Ni allai Windows Resource Protection gyflawni'r weithred y gofynnwyd amdani.
- Daeth Windows Resource Protection o hyd i ffeiliau llwgr a'u hatgyweirio'n llwyddiannus.
- Daeth Windows Resource Protection o hyd i ffeiliau llygredig ond nid oedd yn gallu trwsio rhai ohonynt.
6. Unwaith y bydd y sgan wedi'i orffen, ail-gychwyn eich cyfrifiadur.
7. Eto, lansio Gorchymyn Gorchymyn yn weinyddwr a gweithredwch y gorchmynion a roddwyd y naill ar ôl y llall:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Nodyn: Rhaid bod gennych gysylltiad rhyngrwyd gweithredol i weithredu gorchmynion DISM yn iawn.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Taro'r Allwedd Windows a math Rheolwr Dyfais in the Windows search menu. Click on agored.
2. Ehangu'r Adapteyddion Rhwydwaith adran trwy glicio ddwywaith arno.
3. De-gliciwch ar eich Gyrrwr rhwydwaith (er enghraifft, Intel (R) Dual Band Wireless-AC 3168) a dewiswch y Analluogi dyfais opsiwn.
4. Confirm the below prompt by clicking on Ydy.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Galluogi dyfais opsiwn.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Darllenwch hefyd: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type cmd. Cliciwch ar Rhedeg fel gweinyddwr.
2. Teipiwch y canlynol gorchmynion a glanio ar y Rhowch allwedd.
ail-osod winsock netsh ailosodiad IP netsh ipconfig / rhyddhau ipconfig / adnewyddu
3. Aros i'r gorchmynion gael eu gweithredu a ailgychwyn eich cyfrifiadur.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lansio Gorchymyn 'n Barod by searching in the ffenestri fwydlen and click on Run as administrator.
2. Math ipconfig / flushdns in the command window and hit Rhowch.
Darllenwch hefyd: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lansio'r Run blwch deialog trwy wasgu Allweddi Windows + R. gyda'i gilydd.
2. Math ncpa.cpl a daro Rhowch allwedd.
3. Right-click on your active addasydd rhwydwaith a chliciwch ar Eiddo.
4. Dad-diciwch y Protocol Rhyngrwyd Fersiwn 6 (TCP / IPv6) opsiwn.
5. Yn olaf, cliciwch ar OK to save the changes and check if the issue is resolved.
Nodyn: If you use multiple network connections, navigate to Canolfan Rwydweithio a Rhannu ac Newid addasydd settings. Right-click on the adapter and select Analluoga. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Math Rheolwr Dyfais in the Windows search menu and click agored.
2. Cliciwch ddwywaith ar y Adapteyddion Rhwydwaith i'w ehangu.
3. De-gliciwch ar eich gyrrwr (ee Di-wifr Band Deuol Intel (R)-AC 3168) a chlicio Diweddaru gyrrwr.
4. Cliciwch ar Porwch fy nghyfrifiadur am yrwyr to locate and install a driver manually.
5. Cliciwch ar y Browser button to choose any directory and click on Digwyddiadau.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Os ydynt eisoes mewn cam wedi'i ddiweddaru, mae'r sgrin yn dangos y neges ganlynol, Mae'r gyrwyr gorau ar gyfer eich dyfais eisoes wedi'u gosod.
6. Cliciwch ar Cau i adael y ffenestr.
7. Ail-ddechrau the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lansio Rheolwr Dyfais from the Windows search menu.
2. De-gliciwch ar y gyrrwr a dewis Dyfais dadstystio.
3. A warning prompt will be displayed on the screen. Check the box “Dileu'r meddalwedd gyrrwr ar gyfer y ddyfais hon” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Ymweld â'r gwefan gwneuthurwr.
2. Dod o hyd i ac Lawrlwytho y gyrwyr sy'n cyfateb i'r fersiwn Windows ar eich cyfrifiadur.
3. Once downloaded, double click on the ffeil wedi'i lawrlwytho a dilynwch y cyfarwyddiadau a roddir i'w osod.
Darllenwch hefyd: Sut i sefydlu VPN ar Windows 10
Dull 10: Diweddaru Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Gwasgwch y Ffenestri + I. allweddi gyda'n gilydd i agor Gosodiadau Ar eich cyfrifiadur.
2. Dewiswch Diweddariad a Diogelwch.
3. Dewiswch Gwiriwch am y Diweddariadau.
4A. Click Gosod nawr i lawrlwytho a gosod y diweddariad diweddaraf sydd ar gael.
4B. Os yw'ch system eisoes yn gyfredol, yna bydd yn dangos Rydych chi'n gyfoes neges.
Dull 11: Dadosod Diweddariadau Diweddar
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pwyswch a daliwch Allweddi Windows + R. gyda'n gilydd i agor y Run blwch deialog.
2. Math appwiz.cpl a daro Rhowch.
3. Cliciwch ar Gweld gosod diweddariadau.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and ailgychwyn y PC.
Darllenwch hefyd: Sut i drwsio Firefox Ddim yn Llwytho Tudalennau
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the addaswyr rhwydwaith installed in your PC along with their settings. All the stored settings are stored to default settings.
Nodyn: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Gosodiadau Yna, system ac Ynghylch. Once you have reset your network, you have to reinstall all networking software fel Cleientiaid VPN or Switsys rhithwir.
1. Pwyswch a daliwch Allweddi Windows + I gyda'n gilydd i agor Gosodiadau Windows.
2. Cliciwch ar Rhwydwaith a'r Rhyngrwyd.
3. Cliciwch ar Ailosod y rhwydwaith dan Statws.
4. Cadarnhewch yr anogwr trwy glicio ar Ailosod nawr.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Argymhellir:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.