Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Sørg for at oprette et gendannelsespunkt, hvis noget går galt.
Metode 1: Deaktiver antivirus og firewall midlertidigt
1. Højreklik på Antivirus program ikon fra proceslinjen og vælg Deaktiver.
2. Vælg derefter den tidsramme, for hvilken Antivirus forbliver deaktiveret.
Bemærk: Vælg den mindst mulige tid, f.eks. 15 minutter eller 30 minutter.
3.Once done, again check if the error resolves or not.
4. Tryk på Windows-tasten + I og vælg derefter Kontrolpanel.
5. Klik derefter på System og sikkerhed.
6. Klik derefter på Windows Firewall.
7. Klik nu fra venstre vindue på Slå Windows Firewall til eller fra.
8.Vælg Slå Windows Firewall fra, og genstart din pc. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Hvis ovenstående metode ikke virker, skal du sørge for at følge nøjagtig de samme trin for at tænde din firewall igen.
Method 2: Delete Hidden Network Adapters
1. Tryk på Windows-tasten + R og skriv derefter devmgmt.msc og tryk Enter for at åbne Enhedshåndtering.
2. Vælg nu Netværksadaptere og klik derefter på Se> Vis skjulte enheder.
3.Right-click on each of the hidden devices and select Afinstaller enhed.
4.Do this for all the hidden devices listed under Network Adapters.
5. Genstart din pc for at gemme ændringer.
Method 3: Turn ON Network Discovery
1. Tryk på Windows-tasten + X og vælg derefter Kontrolpanel.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Skift indstillinger for avanceret deling fra menuen til venstre.
4.Check mark Tænd for netværksopdagelse and click Save changes.
5. Genstart din pc for at gemme ændringer og se, om du er i stand til det Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1. Tryk på Windows-tasten + R og skriv derefter ncpa.cpl og tryk på Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Egenskaber.
3.Select 4 Internet Protocol Version (TCP / IPv4) og klik på Egenskaber.
4. Klik nu Avanceret in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Aktivér NetBIOS over TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1. Tryk på Windows-tasten + X og vælg derefter Kontrolpanel.
2. Skriv Credential in the control panel search and click on Credential Manager.
3.Select Windows-legitimationsoplysninger og klik derefter på Add a Windows credential.
4.One by one type the brugernavn og adgangskode of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Egenskaber.
2.Skift til Deling faneblad and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Del denne mappe” and make sure the Share name is correct.
4. Klik på Anvend efterfulgt af OK.
Method 7: Change Network Security settings
1. Tryk på Windows-tasten + R og skriv derefter secpol.msc og tryk på Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Dobbeltklik på Netværkssikkerhed: LAN Manager-godkendelsesniveau in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Klik på Anvend efterfulgt af OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Metode 8: Nulstil TCP/IP
1.Right-click on Windows Button and select “Kommandoprompt (Admin)."
2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /forny
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4. Genstart for at anvende ændringer.
Anbefalet til dig:
Det er det du har med succes Fix Error code 0x80070035 The network path was not found men hvis du stadig har spørgsmål vedrørende dette indlæg, er du velkommen til at stille dem i kommentarfeltet.