Intel Wireless AC 9560 is the most dedicated Wi-Fi adapter of Intel. If this network adapter fails to work on your device, you cannot connect to any network. This issue is often accompanied by an error code of 10 or 45 if you check the properties of this network adapter. If you are also facing Intel Wireless AC 9560 not working issue on your Windows 10 PC, you can easily troubleshoot the same by following the below-listed hacks. So, continue reading to fix Intel Wireless AC 9560 code 10 error.
How to Fix Intel Wireless AC 9560 Not Working
You may wonder why this problem occurs on your Windows 10 PC. Here are some valid reasons that trigger this problem in your device.
- Router configuration is not proper.
- Netværksforbindelsen er meget dårlig.
- The cable connecting the router and the modem is damaged or broken.
- For mange mennesker er forbundet til det samme netværk.
- Wireless interference between the router and your device.
- Forældede netværksdrivere.
- Other background processes are consuming too many CPU resources from your PC.
- Incompatible proxy/ TCP configuration settings.
- The DNS addresses are not appropriate.
- Few essential Windows services like WLAN Autoconfig are not enabled on your device.
- Corrupt components on PC and presence of malware.
- The Operating system version is not compatible with the latest version of the driver.
Here are a few troubleshooting ideas that will help you fix the issue. Follow them in the same order to attain the best results.
Bemærk: Few steps in this guide are demonstrated with some other Wireless adapters. Follow the steps for Intel Wireless AC 9560 driver accordingly.
Metode 1: Grundlæggende fejlfindingsmetoder
Before going through the advanced troubleshooting methods, follow these basic methods to fix the issue.
1A. Genstart pc'en
If there are any temporary glitches in your PC, you will face Intel Wireless AC 9560 code 10. The general trick to resolve all the temporary glitches is to restart your computer. You can restart your PC by following the steps.
1. Hit på Windows + D-taster sammen for at gå til desktop.
2. Tryk nu på Alt + F4 tasterne samtidigt.
3. Vælg derefter Genstart option from the drop-down menu and hit Indtast.
1B. Sørg for korrekt netværksforbindelse
Unstable internet connection leads to Intel Wireless AC 9560 not working code 10, also if there are any obstacles between your router and your computer, they may interfere with the wireless signal and will cause intermittent connection problems. You can run a Speedtest at kende det optimale niveau af netværkshastighed, der kræves for den korrekte forbindelse.
Sørg for, at din enhed opfylder nedenstående kriterier.
- Find signalstyrken på dit netværk, og hvis den er meget lav, skal du fjerne alle forhindringer mellem vejen.
- Undgå for mange enheder, der er tilsluttet det samme netværk.
- Køb altid et modem/router, der er verificeret af din internetudbyder (ISP), og de er fri for konflikter.
- Brug ikke gamle, ødelagte eller beskadigede kabler. Udskift om nødvendigt kablerne.
- Sørg for, at ledningerne fra modemmet til routeren og modemmet til væggen er stabile og ude af forstyrrelse.
Læs også: Ret ingen WiFi-netværk fundet i Windows 10
1C. Run Network Troubleshooter and Reset TCP/IP
To fix various internet connectivity issues, you can use the inbuilt tool provided in Windows 10 PC whenever needed. By using the Windows network troubleshooter tool, you can analyze and diagnose any common network-related issues. It is a systematic process, when implemented step by step, will help you fix Intel Wireless AC 9560 keeps disconnecting problem.
Follow our guide How to Troubleshoot Network Connectivity Problems on Windows 10 to learn basic troubleshooting steps to fix all network-related issues by using the Windows Network Adapter troubleshooter.
You can use the steps mentioned in the guide to diagnose Wi-Fi connections, Ethernet, and all network adapters in your Windows 10 PC. Finally, check if you have fixed the discussed error or not.
1D. Luk Baggrundsprocesser
Several users have confirmed that Intel Wireless AC 9560 not working issue can be resolved by closing all the background tasks running on your PC. To implement the task, follow our guide How to End Task in Windows 10 and proceed as instructed.
Once you have closed all the background processes, check if you were able to fix the issue or not.
1E. Reparer systemfiler
If there are any corrupt system files in your Windows Operating system, your PC may face a lot of internet connectivity issues. If you are experiencing Intel Wireless AC 9560 code 10 very recently, there are some chances that your computer files have become corrupt or damaged.
Heldigvis har din Windows 10-pc indbyggede reparationsværktøjer som SFC (System File Checker) og DISM (Deployment Image Servicing and Management), der hjælper dig med at rette alle de korrupte filer.
Læs vores guide til, hvordan du reparerer systemfiler på Windows 10, og følg trinene som instrueret for at reparere alle dine korrupte filer.
Læs også: Ret Windows 10 Netwtw04.sys Blue Screen Fejl
1F. Use Google DNS
Domain Name System (DNS) addresses are responsible to establish a network connection between the client and server-side. Many technical experts have suggested that using Google DNS addresses helped them to fix Intel Wireless AC 9560 not working issue. To do so, follow our guide on How to change DNS settings in Windows 10.
1G. Disable Proxy Server
Sometimes, inappropriate network configurations on your Windows 10 computer, you will face Intel Wireless AC 9560 code 10 issue. If you have installed any VPN service or use proxy servers on your PC, read out How to Disable VPN and Proxy on Windows 10 and implement the steps as instructed in the article.
After disabling the VPN client and proxy servers, check if you have fixed the discussed issue. Still, if you face the same problem, try connecting to a mobilt hotspot.
After implementing the steps, check if you can fix Intel Wireless AC 9560 not working or not.
Læs også: Ret computere, der ikke vises på netværket i Windows 10
1H. Opdater Windows
You can also eradicate Intel Wireless AC 9560 keeps disconnecting on your computer by updating your Operating System. Always ensure if you have updated your Windows Operating System and if there are any updates pending in action, use our guide How to Download and Install Windows 10 Latest Update.
After updating your Windows Operating System, check whether you can connect to your network adapter.
1I. Run Malware Scan
Sudden virus or malware attack will result in Intel Wireless AC 9560 not working code 10 issue on your computer. If in case, the virus attack is very severe, you cannot connect to any network continuously at all. To resolve the problem, you have to remove the virus or malware completely from your Windows 10 computer.
Du rådes til at scanne din computer som anvist i vores vejledning. Hvordan kører jeg en virusscanning på min computer?
Hvis du også vil fjerne malware på din computer, skal du tjekke vores guide Sådan fjerner du malware fra din pc i Windows 10.
Method 2: Enable WiFi from Settings
Intel Wireless AC 9560 code 10 will hide the internet icons from the main menu and you cannot use them as you do regularly. If you cannot see WiFi in the Taskbar, you can enable it from the settings menu as instructed below.
1. Tryk på Windows + I-taster sammen for at åbne Windows-indstillinger.
2. Klik nu på Netværk og internet indstilling som vist.
3. Now, in the left pane click on the Wi-Fi fanen og skift på Wi-Fi .
Læs også: Fix Windows kunne ikke automatisk registrere dette netværks proxy-indstillinger
Method 3: Regenerate IP Address
Some internet tasks won’t function on public IP addresses due to security concerns, and as a result, they temporarily freeze the account. Follow these steps to reset the IP address and fix Intel Wireless AC 9560 code 10.
1. Tryk på Windows-tasten og type Kommandoprompt i søgefeltet.
2. Højreklik på Kommandoprompt og vælg Kør som administrator.
3. Klik på Ja to give permission.
4. Indtast følgende kommandoer one after the other and hit Indtast nøgle efter hver kommando.
Ipconfig / flushdns ipconfig / release ipconfig / renew
5. Execute the following kommandoer to fix any wrong network configuration:
netsh int ip reset netsh winsock reset
6. After entering the commands, genstart pc'en.
Method 4: Re-enable Wi-Fi Cards
Sometimes, if the Wi-Fi adapters are not enabled on your PC, you will face Intel Wireless AC 9560 keeps disconnecting issue. But there are a few simple instructions to enable WiFi adapters on your computer.
1. Åbn Kør dialogboksen ved at trykke på Windows + R-taster sammen.
2. Indtast nu ncpa.cpl og hit Indtast nøgle at lancere Netværksforbindelser.
3. Højreklik nu på din aktive Netværksadapter og kontroller, om den er aktiveret eller deaktiveret.
4. Klik på Aktiver hvis status er deaktiveret.
Bemærk: If the status is already in Enable, move to the next method.
Check if you have fixed Intel Wireless AC 9560 issue or not.
Læs også: Fix Ethernet har ikke en gyldig IP-konfigurationsfejl
Method 5: Disable & Enable Intel Wireless AC 9560 Adapter
Sometimes, a small temporary glitch in your network adapters can cause Intel Wireless AC 9560 not working code 10 issue. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Hit på Windows-tasten og type Enhedshåndtering i Windows søgemenuen. Klik på Åbne som vist.
2. Udvid nu Netværkskort afsnittet ved at dobbeltklikke på det.
3. Højreklik derefter på Intel Wireless AC 9560 driver and select the Deaktiver enhed valgmulighed.
Bemærk: Vi har vist Qualcomm Atheros QCA9388 trådløs netværksadapter som et eksempel.
4. Then, confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, right-click on Intel Wireless AC 9560 og vælg Aktivér enheden mulighed som vist.
Finally, check if the issue with your driver is fixed or not.
Method 6: Start WLAN AutoConfig Service
A ton of services will run in the background whenever you boot your Windows 10 PC. One among them is the WLAN AutoConfig service which is responsible for WiFi services. If this service is disabled, you may face Intel Wireless AC 9560 keeps disconnecting issue and what you need to do is to restart the service as instructed below.
1. Gå til Skriv her for at søge field in the bottom left corner of the screen and type Tjenester as shown. Then, click on Åbne.
2. Søg nu efter WLAN AutoConfig Service og dobbeltklik på den.
Bemærk: You can also right-click on WLAN AutoConfig Service og vælg Ejendomme mulighed i rullelisten.
3. Vælg nu Starttype as Automatisk Ur.
3A. Hvis Tjenesten status er ikke Løb, og klik derefter på Starten .
3B. Hvis Tjenesten status is Løb, klik på Stands button for a while and Start it again.
4. Til sidst skal du klikke på Anvend> OK for at gemme ændringerne.
Læs også: Sådan konfigurerer du deling af netværksfiler på Windows 10
Metode 7: Deaktiver strømsparetilstand
Sometimes, you may face Intel Wireless AC 9560 not working code 10 issue if you have enabled power-saving mode in your Windows 10 computer. This leads to several network connectivity problems. We advise you to disable power saving mode as instructed below.
1. Lancering Enhedshåndtering by typing it in the Windows 10 search menu and clicking on Åbne.
2. Dobbeltklik nu på Netværkskort sektion.
3. Højreklik derefter på Intel Wireless AC 9560 og vælg Ejendomme mulighed som vist.
4. Skift derefter til Power Management vindue i Egenskaber for netværksadapter vinduet og fjern markeringen i feltet ved siden af Tillad computeren at slukke for denne enhed for at spare strøm.
5. Til sidst skal du klikke på OK for at gemme ændringerne.
Method 8: Update Intel Wireless AC 9560 Driver
Device drivers establish a connection link between the hardware and Operating System of your computer. Also, faulty or corrupt drivers lead to Intel Wireless AC 9560 keeps disconnecting issue. Many users have reported that updating all WLAN drivers have helped them fix the issue.
Option I: Update Network Driver
You are advised to update WLAN drivers to improve the reliability of your network adapters, fix compatibility issues, and resolve the discussed issue. Follow our guide on How to Update Network Adapter Drivers on Windows 10 to do so.
Option II: Roll Back Driver Updates
When you roll back your drivers, all the current versions of the hardware device will be uninstalled and previously installed drivers will be installed on your PC. This feature will be very helpful when any new driver update does not work well with your computer. Follow the steps as instructed in our guide How to Rollback Drivers on Windows 10 to fix the discussed issue.
After your Windows 10 computer has installed the previous version of drivers, check if you have fixed the discussed problem.
Method 9: Reinstall Intel Wireless AC 9560 Driver
Incompatible drivers must be reinstalled to fix Intel Wireless AC 9560 not working code 10. You are advised to reinstall device drivers only if you cannot attain any fix by updating them. Steps to reinstall drivers are very easy and you can do so by using a third-party application or manually.
Follow our guide How to Uninstall and Reinstall Drivers on Windows 10 on your Windows 10 computer.
Efter geninstallation af netværksdrivere skal du kontrollere, om du har løst det diskuterede problem.
Læs også: Ret netværksfejl 0x00028001 på Windows 10
Metode 10: Nulstil netværksindstillinger
Several users have declared that, resetting network settings will resolve strange network connection issues. This method will forget all the network configuration settings, saved credentials, and a lot more security software like VPN and antivirus programs.
To do so, follow our guide on How to Reset Network Settings on Windows 10
Method 11: Reset BIOS to Default
There are several customization settings in BIOS of your system in order to improve the system performance. Some activities like overclocking and caching might change any default settings and thus contributing to the said problem. Yet, the easiest way to tackle the problem is to reset the BIOS to default. Here is how to do that.
1. Restart your system and hold F2-nøgle while pressing the Power button.
Bemærk: The combinational keys to turn on BIOS settings might vary according to the system model you use. You are advised to make sure which combinational keys work on your PC. Read 6 Ways to Access BIOS in Windows 10 (Dell/Asus/ HP) here.
2. Naviger til Advanced BIOS section Og vælg Nulstil konfigurationsdata.
3. Til sidst skal du vælge Gem og luk valgmulighed.
Metode 12: Udfør systemgendannelse
If you have recently updated your Windows 10 operating system and later facing Intel Wireless AC 9560 not working code 10, the latest Windows update components may interfere with any software present in your computer and may cause the discussed issue. So, in this case, you must restore your computer to the previous version when it was working fine.
For at gøre det skal du følge vores vejledning om, hvordan du bruger Systemgendannelse på Windows 10 og implementere instruktionerne som vist.
After restoring your Windows 10 PC, check if you can connect to any network adapter without any problems.
Læs også: Fix Internet bliver ved med at falde på Windows 10
Metode 13: Nulstil pc
If none of the methods have helped you fix Intel Wireless AC 9560 code 10, then you have to clean install your Windows Operating System. To clean boot your computer, implement the steps as instructed in our guide How to do a Clean Install of Windows 10
Last but not the least, you have to seek for technical support if above listed methods fail to resolve Intel Wireless AC 9560 not working. If your modem does not communicate with your Internet Service Provider, a lot more technical connectivity problems arise in your device. The Internet Service Providers will check whether the devices are updated, compatible and properly registered.
Anbefalet:
Vi håber, at denne guide var nyttig, og at du kunne fix Intel Wireless AC 9560 not working issue in Windows 10. Let us know what you want to learn about next. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.