When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus eller malware-angreb.
- Forældet operativsystem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe .
2. If the status is set to Ikke forbundet, klik på Network globe icon, choose your Wi-Fi network and click on Tilslut button. Make sure Flytilstand er ikke tændt.
3. If you again face the same network connection error code, then click on the Afbryd button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Højreklik på Wi-Fi-ikon og vælg Open Network & Internet settings.
6. Klik på Wi-Fi.
7. Scroll down the right menu, click on Administrer kendte netværk.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Glemme.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metode 2: Genstart routeren
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Bemærk: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Find afbryderknappen at the back of your router.
2. Press the button once to sluk den.
3. Nu, afbryde din Router power cable og vent, indtil strømmen er helt drænet fra kondensatorerne.
4. Derefter tilslut og strømkabel og tænd den efter et minut.
5. Wait until the network connection is re-established and try signing in again.
Læs også: Ret computere, der ikke vises på netværket i Windows 10
Metode 3: Kør netværksfejlfinding
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Hit på Windows-tasten og type Fejlfinding af indstillinger i søgefeltet og Åbn.
2. Klik på Yderligere fejlfinding.
3. Vælg Network Adapter og klik på Kør fejlfindingsprogrammet.
4. Select the network adapter to diagnose og klik på Næste.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, Klik på Luk fejlfinding.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Læs også: Ret familiedeling YouTube TV virker ikke
Metode 4: Reparer systemfiler
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Kontrolprogram til systemfiler) /DISM (Deployment Image Servicing og Management) utilities on your Windows 10 PC.
1. Hit på Windows-tastenSkriv Kommandoprompt og klik på Kør som administrator.
2. Klik på Ja i User Account Control hurtig.
3. Type chkdsk C: / f / r / x kommando og tryk Indtast nøgle.
4. Hvis du bliver bedt om en besked, Chkdsk kan ikke køre ... volumen er ... i brug, så skriv Y og ramte Indtast nøgle.
5. Indtast kommandoen igen: sfc / scannow og tryk Indtast nøgle at køre Kontrolprogram til systemfiler Scan.
Bemærk: En systemscanning vil blive startet, og det vil tage et par minutter at afslutte. I mellemtiden kan du fortsætte med at udføre andre aktiviteter, men vær opmærksom på ikke at lukke vinduet ved et uheld.
Efter at have gennemført scanningen, vil den vise en af disse meddelelser:
- Windows Ressourcebeskyttelse fandt ikke nogen krænkelse af integritet.
- Windows Resource Protection kunne ikke udføre den ønskede operation.
- Windows Resource Protection fandt korrupte filer og reparerede dem korrekt.
- Windows Resource Protection fandt korrupte filer, men kunne ikke rette nogle af dem.
6. Når scanningen er færdig, genstart din pc.
7. Igen, start Kommandoprompt som administrator og udfør de givne kommandoer efter hinanden:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Bemærk: Du skal have en fungerende internetforbindelse for at udføre DISM-kommandoer korrekt.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Hit på Windows-tasten og type Enhedshåndtering in the Windows search menu. Click on Åbne.
2. Udvid Netværkskort section by double-clicking on it.
3. Højreklik på din Netværksdriver (for eksempel, Intel (R) Dual Band Wireless-AC 3168) og vælg Deaktiver enhed valgmulighed.
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Aktivér enheden valgmulighed.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Læs også: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Gå til søgemenuen og skriv cmd. Klik på Kør som administrator.
2. Indtast følgende kommandoer og ramte Indtast nøgle.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Vent på, at kommandoerne udføres og genstart din pc.
Method 7: Flush DNS Cache
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lancering Kommandoprompt by searching in the Windows menu and click on Run as administrator.
2. Type ipconfig / flushdns in the command window and hit Indtast.
Læs også: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Start Kør dialogboksen ved at trykke på Windows + R-taster sammen.
2. Type ncpa.cpl og hit Indtast nøgle.
3. Right-click on your active Netværksadapter og klik på Ejendomme.
4. Fjern markeringen i Internetprotokol version 6 (TCP / IPv6) valgmulighed.
5. Til sidst skal du klikke på OK to save the changes and check if the issue is resolved.
Bemærk: If you use multiple network connections, navigate to Netværks- og delingscenter , Skift adapter settings. Right-click on the adapter and select Deaktiver. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Type Enhedshåndtering in the Windows search menu and click Åbne.
2. Dobbeltklik på Netværkskort at udvide den.
3. Højreklik på din driver (f.eks Intel (R) Dual Band Wireless-AC 3168) og klik Opdater driver.
4. Klik på Gennemse min computer efter drivere to locate and install a driver manually.
5. Klik på browser button to choose any directory and click on Næste.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, De bedste drivere til din enhed er allerede installeret.
6. Klik på Luk at forlade vinduet.
7. Genstart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lancering Enhedshåndtering from the Windows search menu.
2. Højreklik på driver og vælg Afinstaller enhed.
3. A warning prompt will be displayed on the screen. Check the box “Slet driverprogrammet til denne enhed” and confirm the prompt by clicking Afinstaller.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Besøg producentens hjemmeside.
2. Finde , Hent the drivers corresponding to the Windows version on your PC.
3. Når den er downloadet, skal du dobbeltklikke på downloadet fil and follow the given instructions to install it.
Læs også: How to set up a VPN on Windows 10
Metode 10: Opdater Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Tryk på Windows + I nøgler sammen for at åbne Indstillinger På din computer.
2. Vælg Opdatering og sikkerhed.
3. Vælg Søg efter opdateringer.
4A. Click Installer nu to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Du er opdateret besked.
Metode 11: Afinstaller seneste opdateringer
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. tryk og hold Windows + R-taster sammen for at åbne Kør dialog boks.
2. Type appwiz.cpl og hit Indtast.
3. Klik på Vis installerede opdateringer.
4. Select the most recent update and click on Afinstaller.
5. Confirm the prompt, if any, and genstart pc'en.
Læs også: Sådan rettes Firefox, der ikke indlæser sider
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the netværkskort installed in your PC along with their settings. All the stored settings are stored to default settings.
Bemærk: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Indstillinger derefter Systemkrav , Om. Once you have reset your network, you have to reinstall all netværkssoftware ligesom VPN-klienter or Virtuelle kontakter.
1. tryk og hold Windows + I-taster sammen for at åbne Windows-indstillinger.
2. Klik på Netværk og internet.
3. Klik på Netværks nulstilling under Status.
4. Bekræft prompten ved at klikke på Nulstil nu.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Anbefalet:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.