Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Error 1962: No operating system found. Boot sequence will automatically repeat.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Fehler 1962: Kein Betriebssystem gefunden [GELÖST]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Hinweis: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Methode 1: Automatische/Startreparatur ausführen
1.Legen Sie die bootfähige Installations-DVD von Windows 10 ein und starten Sie Ihren PC neu.
2.Wenn Sie aufgefordert werden, eine beliebige Taste zu drücken, um von CD oder DVD zu booten, drücken Sie eine beliebige Taste, um fortzufahren.
3.Wählen Sie Ihre Spracheinstellungen aus und klicken Sie auf Weiter. Klicken Sie auf Reparieren Ihren Computer unten links.
4.Klicken Sie auf dem Bildschirm „Option auswählen“ auf Problembehandlung.
5.Klicken Sie auf dem Bildschirm Fehlerbehebung Fortgeschrittene Option.
6.Klicken Sie im Bildschirm „Erweiterte Optionen“ auf Automatische Reparatur oder Startreparatur.
7.Warten Sie bis die Automatische Reparaturen/Startup-Reparaturen von Windows abgeschlossen.
8.Starten Sie neu und Sie haben erfolgreich Fix Error 1962 No Operating System Found.
Lesen Sie auch So beheben Sie das Problem: Die automatische Reparatur konnte Ihren PC nicht reparieren.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Um die Diagnose auszuführen, starten Sie Ihren PC neu und drücken Sie beim Start des Computers (vor dem Startbildschirm) die Taste F12. Wenn das Boot-Menü angezeigt wird, markieren Sie die Option Boot to Utility Partition oder die Option Diagnostics und drücken Sie die Eingabetaste, um die Diagnose zu starten. Dadurch wird automatisch die gesamte Hardware Ihres Systems überprüft und es wird gemeldet, wenn ein Problem gefunden wird.
Method 3: Set correct boot order
You may be seeing the “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Drücken Sie beim Starten Ihres Computers (vor dem Startbildschirm oder dem Fehlerbildschirm) wiederholt die Taste Entf oder die Taste F1 oder F2 (je nach Hersteller Ihres Computers). Rufen Sie das BIOS-Setup auf.
2.Sobald Sie sich im BIOS-Setup befinden, wählen Sie die Registerkarte Boot aus der Liste der Optionen.
3.Stellen Sie nun sicher, dass der Computer Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Primäre Startsequenz
CSM: [Aktivieren]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Press F10 to save and exit changes in the BIOS setup.
Methode 4: Aktivieren Sie UEFI Boot
Most UEFI firmware (Unified Extensible Firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Ändern Sie die Boot-Listenoption in „UEFI Disable Load Legacy option ROM Enable Secure boot“.
3. Tippen Sie anschließend auf F10, um das Boot-Setup zu speichern und zu beenden.
Method 5: Restore your PC using Recovery Disc
1.Legen Sie das Windows-Installationsmedium oder die Wiederherstellungslaufwerk-/Systemreparatur-CD ein und wählen Sie Ihr Laufwerk ausSprachpräferenzen, und klicken Sie auf Weiter
2.Klicken Reparatur unten auf Ihrem Computer.
3. Wählen Sie nun Problembehandlung und dann Erweiterte Optionen.
4..Klicken Sie abschließend auf „Systemwiederherstellung” und befolgen Sie die Anweisungen auf dem Bildschirm, um die Wiederherstellung abzuschließen.
5. Starten Sie Ihren PC neu und dieser Schritt ist möglicherweise abgeschlossen Fix Error 1962 No Operating System Found.
Methode 6: Reparieren Installieren Sie Windows 10
Wenn keine der oben genannten Lösungen für Sie funktioniert, können Sie sicher sein, dass Ihre Festplatte in Ordnung ist, aber möglicherweise wird die Fehlermeldung „Error 1962 No Operating System Found” weil das Betriebssystem oder die BCD-Informationen auf der Festplatte irgendwie gelöscht wurden. Nun, in diesem Fall können Sie versuchen, die Windows-Reparaturinstallation durchzuführen. Wenn dies jedoch ebenfalls fehlschlägt, besteht die einzige verbleibende Lösung darin, eine neue Kopie von Windows zu installieren (Neuinstallation).
Für dich empfohlen:
Das ist es, was Sie erfolgreich haben Fix Error 1962: No Operating System Found Wenn Sie jedoch noch Fragen zu diesem Leitfaden haben, können Sie diese gerne im Kommentarbereich stellen.