When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Viren- oder Malware-Angriff.
- Veraltetes Betriebssystem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe klicken.
2. If the status is set to Nicht verbunden, Klicken Sie auf Network globe icon, choose your Wi-Fi network and click on Vernetz Dich button. Make sure Flugzeug-Modus ist nicht eingeschaltet.
3. If you again face the same network connection error code, then click on the Disconnect button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Klicken Sie mit der rechten Maustaste auf WLAN-Symbol und wählen Sie Öffnen Sie die Netzwerk- und Interneteinstellungen.
6. Klicke auf Wi-Fi.
7. Scroll down the right menu, click on Bekannte Netzwerke verwalten.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Vergessen.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Methode 2: Router neu starten
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Hinweis: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1 Finden Sie die Power-Taste auf der Rückseite Ihres Routers.
2. Drücken Sie die Taste einmal, um schalte es aus.
3. Nun, trennen Ihre Router power cable und warten Sie, bis die Kondensatoren vollständig entladen sind.
4. Dann, schließen Stromkabel und schalten Sie es nach einer Minute ein.
5. Wait until the network connection is re-established and try signing in again.
Lesen Sie auch: Beheben Sie, dass Computer in Windows 10 nicht im Netzwerk angezeigt werden
Methode 3: Führen Sie die Netzwerk-Fehlerbehebung aus
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Schlagen Sie die Windows-Taste und Typ Fehlerbehebung bei Einstellungen in der Suchleiste und Zu öffnen.
2. Klicke auf Zusätzliche Fehlerbehebungen.
3 Wählen Netzwerk Adapter und klicken Sie auf Führen Sie die Problembehandlung aus.
4. Select the network adapter to diagnose und klicken Sie auf Weiter.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, klicke auf Schließen Sie die Fehlerbehebung.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lesen Sie auch: Fix Family Sharing YouTube TV Not Working
Methode 4: Systemdateien reparieren
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Systemdateiprüfung) /DISM (Bereitstellungs-Image-Wartung und Verwaltung) utilities on your Windows 10 PC.
1. Schlagen Sie die Windows-Taste, Typ Eingabeaufforderung und klicken Sie auf Als Administrator ausführen.
2. Klicke auf Ja der User Account Control prompt.
3. Art chkdsk C: / f / r / x kommandieren und treffen Enter-Taste.
4. Wenn Sie mit einer Meldung dazu aufgefordert werden, Chkdsk kann nicht ausgeführt werden … das Volume ist … in Verwendung, dann geben Sie ein Y und drücken Sie die Enter-Taste.
5. Geben Sie erneut den Befehl ein: sfc / scannow und drücken Sie Enter-Taste das laufen lassen Systemdateiprüfung Scan.
Hinweis: Es wird ein Systemscan eingeleitet, dessen Abschluss einige Minuten dauern wird. In der Zwischenzeit können Sie anderen Aktivitäten nachgehen, aber achten Sie darauf, dass Sie das Fenster nicht versehentlich schließen.
Nach Abschluss des Scans wird eine dieser Meldungen angezeigt:
- Windows Resource Protection hat keine Integritätsverletzungen festgestellt.
- Der Windows-Ressourcenschutz konnte den angeforderten Vorgang nicht ausführen.
- Der Windows-Ressourcenschutz hat beschädigte Dateien gefunden und erfolgreich repariert.
- Der Windows-Ressourcenschutz hat beschädigte Dateien gefunden, konnte jedoch einige davon nicht reparieren.
6. Sobald der Scanvorgang abgeschlossen ist, Wiederaufnahme dein PC.
7. Starten Sie erneut Eingabeaufforderung als Administrator und führen Sie die angegebenen Befehle nacheinander aus:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Hinweis: Sie benötigen eine funktionierende Internetverbindung, um DISM-Befehle ordnungsgemäß ausführen zu können.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Schlagen Sie die Windows-Taste und Typ Geräte-Manager in the Windows search menu. Click on Offen.
2. Erweitere das Netzwerkadapter Abschnitt, indem Sie darauf doppelklicken.
3. Klicken Sie mit der rechten Maustaste auf Ihr Netzwerktreiber (zum Beispiel, Intel (R) Dual Band Wireless-AC 3168) und wählen Sie die Gerät deaktivieren .
4. Confirm the below prompt by clicking on Ja.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Gerät aktivieren .
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lesen Sie auch: Fix Windows konnte die Proxy-Einstellungen dieses Netzwerks nicht automatisch erkennen
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Gehen Sie zum Suchmenü und geben Sie ein cmd. Klicken Sie auf Als Administrator ausführen.
2. Geben Sie Folgendes ein Befehle und drücken Sie die Enter-Taste.
netsh winsock reset netsh int ip Reset ipconfig / release ipconfig / renew
3. Warten Sie, bis die Befehle ausgeführt werden Starten Sie Ihren PC neu.
Methode 7: DNS-Cache leeren
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Starten Eingabeaufforderung by searching in the Windows menu and click on Run as administrator.
2. Art ipconfig / flushdns im Befehlsfenster und drücken Sie Enter.
Lesen Sie auch: [SOLVED] Windows detected a hard disk problem
Methode 8: IPv6 deaktivieren
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Starte den Führen Sie Dialogfeld durch Drücken von Windows + R Schlüssel perfekter Harmonie.
2. Art ncpa.cpl und schlagen Enter-Taste.
3. Right-click on your active Netzwerkadapter und klicken Sie auf Ferienhäuser.
4. Deaktivieren Sie das Kontroll Internetprotokoll Version 6 (TCP / IPv6) .
5. Zum Schluss klicken Sie auf OK to save the changes and check if the issue is resolved.
Hinweis: If you use multiple network connections, navigate to Network and Sharing Center und Adapter wechseln settings. Right-click on the adapter and select Deaktivieren. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Art Geräte-Manager in the Windows search menu and click Offen.
2. Doppelklick auf den Netzwerkadapter um es zu erweitern.
3. Klicken Sie mit der rechten Maustaste auf Ihr Fahrer (z.B Intel (R) Dualband Wireless-AC 3168) und klicken Treiber aktualisieren.
4. Klicke auf Durchsuchen Sie meinen Computer nach Treibern um einen Treiber manuell zu finden und zu installieren.
5. Klicken Sie auf Browser button to choose any directory and click on Weiter.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Die besten Treiber für Ihr Gerät sind bereits installiert.
6. Klicke auf Menu das Fenster verlassen.
7. Wiederaufnahme the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Starten Geräte-Manager from the Windows search menu.
2. Klicken Sie mit der rechten Maustaste auf Fahrer und wählen Sie Gerät deinstallieren.
3. A warning prompt will be displayed on the screen. Check the box “Löschen Sie die Treibersoftware für dieses Gerät” and confirm the prompt by clicking Deinstallieren.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Besuche den Website des Herstellers.
2. Finden Sie und Herunterladen the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the heruntergeladene Datei and follow the given instructions to install it.
Lesen Sie auch: So richten Sie ein VPN unter Windows 10 ein
Methode 10: Windows aktualisieren
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Drücken Sie die Taste Windows + I Tasten zusammen zu öffnen Einstellungen auf deinem Computer.
2 Wählen Update & Sicherheit.
3 Wählen Nach Aktualisierungen suchen.
4A. Click Jetzt installieren um das neueste verfügbare Update herunterzuladen und zu installieren.
4B. Wenn Ihr System bereits auf dem neuesten Stand ist, wird dies angezeigt Du bist auf dem Laufenden Nachricht.
Methode 11: Aktuelle Updates deinstallieren
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. drücken und halten Windows + R Schlüssel zusammen, um die zu öffnen Führen Sie Dialogbox.
2. Art appwiz.cpl und schlagen Enter.
3. Klicke auf Installierte Updates anzeigen.
4. Select the most recent update and click on Deinstallieren.
5. Confirm the prompt, if any, and Starten Sie den PC neu.
Lesen Sie auch: So beheben Sie, dass Firefox keine Seiten lädt
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the Netzwerkadapter installed in your PC along with their settings. All the stored settings are stored to default settings.
Hinweis: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Einstellungen dann System und Über uns. Once you have reset your network, you have to reinstall all Netzwerksoftware Gefällt mir VPN-Clients or Virtuelle Schalter.
1. drücken und halten Windows + I-Tasten zusammen zu öffnen Windows-Einstellungen.
2. Klicke auf Netzwerk & Internet.
3. Klicke auf Netzwerk zurücksetzen für Status.
4. Confirm the prompt by clicking on Jetzt zurücksetzen.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Empfohlen:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Teilen Sie uns mit, welche Methode für Sie am besten funktioniert hat. Wenn Sie außerdem Fragen/Vorschläge zu diesem Artikel haben, können Sie diese gerne im Kommentarbereich hinterlassen.