Wenn Sie konfrontiert sind We couldn’t complete the updates, Undoing changes, Don’t turn off your computer message, and you are stuck in a boot loop, then you will be glad you came here because this post is going to help you fix this error.
Well, Windows 10 is the latest edition of Microsoft Operating System and like all the other OS this sure seems to have a lot of issues too. But the one which we are particularly talking about here is while downloading the new updates and restarting the PC, the update process just stuck and Windows could not start and all we are left with is this annoying error message:
We couldn't complete the updates, Undoing changes, Don't turn off your computer.
And we are just stuck in an endless loop of this error and restarting our PC doesn’t get us anywhere except back to this error. In addition to the above error after restarting several times you may start to see some progress like this:
Installing Updates 15% We couldn’t complete the updates, Undoing changes, Don’t turn off your computer Restarting
But we have a piece of bad news for you, unfortunately, this will only complete till 30% and then it will again restart and this will go on and on and on till you decide to do something about it, well you are here so I guess its time to fix this issue.
Anyway, if you are facing this error on your system, don’t worry as you can easily address the same by just following and applying the fixes from below. So without wasting any time let’s see How to Fix We couldn’t complete the updates, Undoing changes issue with the help of the below-listed troubleshooting steps.
Fix Wir konnten die Aktualisierungen nicht abschließen, Änderungen werden rückgängig gemacht
Anmerkungen: DO NOT, I REPEAT, DO NOT REFRESH/RESET YOUR PC.
If you are able to log on to Windows:
Method 1: Delete Software Distribution Folder
1. Drücken Sie Windows-Taste + X und wählen Sie Eingabeaufforderung (Admin).
2. Now Type the following command inside cmd and hit enter after each one:
Netz stoppen wuauserv Netto-Stoppbits net stop cryptSvc Netzstop msiserver
3. Now browse to the C: WindowsSoftwareDistribution Ordner und löschen Sie alle darin enthaltenen Dateien und Ordner.
4. Again go to command prompt and type each of these commands and hit Enter:
net starten wuauserv net starten cryptSvc Nettobeginn-Bits Net Start MSIServer
5. Starten Sie Ihren Computer neu, um die Änderungen zu speichern.
6. Again try installing the updates and this time you may be successful in installing updates.
7. If you are still facing some issues restore your PC to the date before downloading the updates.
Alternatively, whether you are able to log on to Windows or not, you should try Methods (c),(d), and (e).
Method 2: Download Windows Update Troubleshooter
1. Öffnen Sie Ihren Webbrowser und gehen Sie zu folgenden Seite.
2. Klicke auf "Laden Sie die Windows Update-Problembehandlung herunter und führen Sie sie aus."
3. After the file has finished downloading, double-click on it to run.
4. Click Next and let Windows Update Troubleshooter run.
5. Follow the on-screen instruction to complete the process.
6. If a problem is found, click on Apply this fix.
7. Finally, try again to install the updates and this time you won’t face We couldn’t complete the updates, Undoing changes Fehlermeldung.
Method 3: Enable App Readiness
1. Drücken Sie Windows-Taste + R dann tippe ein services.msc und drücke Enter.
2. Navigieren Sie zu App-Bereitschaft and right click then select Eigenschaften.
3. Now set the Startup type to automatische und klicken auf Anfang.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and you may be able to fix couldn’t complete the updates, Undoing changes error message.
Method 4: Disable Automatic Updates
1. Drücken Sie Windows-Taste + R dann tippe ein services.msc und drücke Enter.
2. Navigieren Sie zu Windows Update setting and right click then select Eigenschaften.
3. Now click Stop and select Startup type to Behindert.
4. Click Apply followed by OK and close the services.msc window.
5. Restart your PC and again try installing updates.
Sehen Sie, ob Sie dazu in der Lage sind Fix We couldn’t complete the updates, Undoing changes issue, wenn nicht dann weiter.
Method 5: Increase Windows System Reserved Partition Size
NOTE: If you use BitLocker, uninstall or delete it.
1. You can increase the reserved partition size manually or by this Partition Manager-Software.
2. Drücken Sie Windows-Taste + X und klicken Sie auf Datenträgerverwaltung.
3. Now to extend the size of Reserved Partition you must have some unallocated space or you have to create some.
4. To create it, right-click on one of your partitions (Excluding OS partition) and select Volumen verkleinern.
5. Finally, right-click on Reserved Partition und wählen Sie Volumen erweitern.
6. Restart your PC and you will be able to fix we couldn’t complete the updates, Undoing changes message.
Method 6: Run Windows 10 Update Troubleshooter
You can also solve the We couldn’t complete the updates issue by running “Windows Update troubleshooter”. This will take a few minutes and will automatically detect & fix your problem.
1. Drücken Sie die Windows-Taste + I, um die Einstellungen zu öffnen, und klicken Sie dann auf Update & Sicherheit.
2. From the left-hand menu make sure to select Problembehandlung
3. Now under Get up and running section, click on Windows Update.
4. Once you click on it, click on “Führen Sie die Problembehandlung aus” under Windows Update.
5. Follow on-screen instructions to run the troubleshooter and see if you’re able to Fix We couldn’t complete the updates Undoing changes issue.
Method 7: If all else fails then install the Updates Manually
1. Klicken Sie mit der rechten Maustaste auf „Dieser PC”Und wählen Sie Eigenschaften.
2. Jetzt drin System Properties, Überprüf den System type and see if you have a 32-bit or 64-bit OS.
3. Drücken Sie die Windows-Taste + I, um die Einstellungen zu öffnen, und klicken Sie dann auf Update & Sicherheit klicken.
4. Unter Windows Update note down the “KB" number of the update which fails to install.
5. Als nächstes öffnen Internet Explorer or Microsoft Edge Navigieren Sie dann zu Microsoft Update Catalog-Website.
Hinweis: Link only work in Internet Explorer or Edge.
6. Under the search box, type the KB number you noted in step 4.
7. Klicken Sie nun auf Schaltfläche herunterladen next to the latest update for your OS type i.e. 32-bit or 64-bit.
8. Once the file is downloaded, double-click on it and follow on-screen instructions to complete the installation.
Method 8: Miscellaneous Fixes
1.Laufen CCleaner to fix registry issues.
2. Create a new Admin account and try installing updates from that account.
3. If you know which updates are causing problems manually download the updates und installiere sie.
4. Delete any VPN services installed on your PC.
5. Disable Firewall and Antivirus, then again try installing the updates.
6. If nothing works, again download the Windows and then try installing the updates.
If you are not able to log on to Windows and stuck in a restart loop.
IMPORTANT: After you are able to log on to Windows try all the above-mentioned methods.
Wichtige Disclaimer:
Hierbei handelt es sich um sehr fortgeschrittene Tutorials. Wenn Sie nicht wissen, was Sie tun, können Sie versehentlich Ihren PC beschädigen oder einige Schritte falsch ausführen, was letztendlich dazu führt, dass Ihr PC nicht in der Lage ist, Windows zu starten. Wenn Sie also nicht wissen, was Sie tun, nehmen Sie bitte die Hilfe eines Technikers in Anspruch. Es wird empfohlen, die Aufsicht eines Experten zu übernehmen.
Method (i): System Restore
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup und configure your PC to boot from CD/DVD.
3. Legen Sie die bootfähige Windows 10-Installations-DVD ein und starten Sie Ihren PC neu.
4. Wenn Sie aufgefordert werden, eine beliebige Taste zu drücken, um von CD oder DVD zu starten, press any key to continue.
5. Wählen Sie Ihre Spracheinstellungen aus und klicken Sie auf Weiter. Klicken Sie auf Reparieren Ihren Computer unten links.
6. On choose an options screen, click Problembehandlung
7. Klicken Sie im Bildschirm „Fehlerbehebung“ auf Fortgeschrittene Option.
8. On Advanced options screen, click Systemwiederherstellung.
9. Select a restore point before the current update and restore your computer.
10. When the Windows restart you won’t see we couldn’t complete the updates, Undoing changes Nachricht.
11. Finally, try method 1 and then install the latest updates.
Method (ii): Delete Problematic update files
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Legen Sie die bootfähige Windows 10-Installations-DVD ein und starten Sie Ihren PC neu.
4. Wenn Sie dazu aufgefordert werden Drücken Sie eine beliebige Taste, um von CD oder DVD zu starten, press any key to continue.
5. Wählen Sie Ihre Spracheinstellungen aus und klicken Sie auf Weiter. Klicken Sie auf Reparieren Ihren Computer unten links.
6. On choose an options screen, click Problembehandlung
7. Klicken Sie im Bildschirm „Fehlerbehebung“ auf Fortgeschrittene Option.
8. On Advanced options screen, click Command Prompt.
9. Type these commands in cmd and press enter after each one:
cd C:Windows
del C:WindowsSoftwareDistribution*.* /s /q
10. Close Command prompt and restart your PC. You will be able to log on to Windows normally.
Finally, try installing the update and you will be able to fix we couldn’t complete the updates, Undoing changes Fehlermeldung.
Method (iii): Run SFC and DISM
1. Open Command Prompt at boot.
2. Geben Sie den folgenden Befehl ein und drücken Sie die Eingabetaste:
Sfc / scannow
3. Let System File Check (SFC) run as it usually takes 5-15 minutes to complete.
4. Now type the following in cmd (Sequential order is important) and hit enter after each one:
a) Dism /Online /Cleanup-Image /CheckHealth
b) Dism /Online /Cleanup-Image /ScanHealth
c) Dism /online /Cleanup-Image /startcomponentcleanup
d) DISM /Online /Cleanup-Image /RestoreHealth
#WARNING: This is not a fast process, component cleanup can take almost 5 hours.
5. After running DISM it is a good idea to re-run SFC / ScanNow to make sure all the issues were fixed.
6. Restart your computer and this time updates will be installed without any problem.
Method (iv): Disable Secure Boot
1. Starten Sie Ihren PC neu.
2. When the system restart Enter the BIOS-Setup by pressing a key during the bootup sequence.
3. Find the Secure Boot setting, and if possible, set it to Aktiviert. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
4. Restart your PC and update will be installed successfully without any error message we couldn’t complete the updates, Undoing changes.
5. Wieder Enable the Secure Boot option from BIOS setup.
Method (v): Delete the System Reserved partition
1. Open Command Prompt and type each of the following commands, hit enter after each one:
bcdboot C:Windows /s C: diskpart Liste vol select vol (Select System Volume) handeln Liste vol select vol (Select System Reserved Volume) inaktiv wunsch
Configure BCD:
bcdedit /set {bootmgr} device partition=C: bcdedit /set {default} device partition=C: bcdedit /set {default} osdevice partition=C:
2. Before making any changes or rebooting, make sure that you have Windows installation DVD or WinPE/WinRE Cd or USB flash Drive in the case of Windows Boot failure. If Windows doesn’t boot, use the Windows installation disk or WinPE/WinRE to boot and at the command prompt type (How to create WinPE Bootable USB):
bootrec / fixmbr bootrec / fixboot bootrec / RebuildBcd
3. Once rebooted, move WinRE from the system reserved partition to the system partition.
4. Again open Command Prompt and type the following command, hit enter after each one:
Assign a drive letter to the recovery partition in Diskpart:
diskpart Liste vol select vol <Recovery Volume> assign let=R Disable WinRE: Reagentc / deaktivieren
Remove WinRE from Reserved partition:
rd R:Recovery
Copy WinRE to System partition:
robocopy C:WindowsSystem32Recovery R:RecoveryWindowsRE WinRE.wim /copyall /dcopy:t
Configure WinRE:
reagentc /setreimage /path C:RecoveryWindowsRE
Enable WinRE:
reagentc / enable
5. For future use, create a new partition at the end of the drive (after the OS partition) and store WinRE and an OSI folder (Original System Installation) which contains all files contained within the Windows 10 DVD. Please make sure that you have enough free space on your hard disk to create this partition drive (usually 100GB). And if you choose to make this partition, it’s important that you set the partition ID flag to 27 (0x27) using Diskpart, as it specifies that it is a Recovery partition.
Für dich empfohlen:
If nothing works then Restore your PC to an earlier time, delete the problematic update from Control Panel, disable the automatic updates and use your PC normally till Microsoft work towards fixing this update problem. In a few days probably 20-30 days try installing the updates again, if successful congratulations but if you are again stuck, then try the above methods, and this time you may succeed.
Das ist es, was Sie erfolgreich behoben haben We couldn’t complete the updates, Undoing changes. Don’t turn off your computer issue and if you still have any queries regarding this update please feel to ask them in comments.