Φεβρουάριος 6, 2018

Fix Computer does not start until restarted multiple times

Fix Computer does not start until restarted multiple times: There seems to be a new issue with PC users, which is when they first turn ON their PC the power comes ON, fans start to spin but everything suddenly stops and PC never gets a display, in short, PC automatically turned OFF without any warning. Now if the user, powers off the PC and then turned it back ON, the computer boots normally without any additional issues. Basically, Computer does not start until restarted multiple times which is very annoying for basic Windows users.

Fix Computer does not start until restarted multiple times

Sometimes you need to boot up to 4-5 time before you could see the display or even boot your PC, but there is no guarantee that it will boot. Now living in this uncertainty, that you may or may not be able to use your PC next day is not such a good thing, so you need to address this problem immediately.

Now there are only a few issues which can cause this problem, so you can definitely troubleshoot this issue easily. The problem sometimes can be related to software like the main culprit seems to be Fast Startup in many cases and disabling it seems to fix the issue. But if this doesn’t fix the issue then you can be sure that the issue is related to hardware. In hardware, this can be a memory issue, faulty power supply, BIOS Settings or CMOS battery dried up, etc. So without wasting any time let’s see how to Fix Computer does not start until restarted multiple times with the help of the below-listed guide.

Fix Computer does not start until restarted multiple times

Φροντίστε να δημιουργήσετε ένα σημείο επαναφοράς, σε περίπτωση που κάτι πάει στραβά.

Σημείωση: Some of the methods require expert supervision as you can seriously damage your PC while performing the steps, so if you don’t know what you’re doing then take your laptop/PC to a service repair center. If your PC is under warranty then opening the case can temper/void the warranty.

Μέθοδος 1: Απενεργοποιήστε τη γρήγορη εκκίνηση

1. Πατήστε Windows Key + R και, στη συνέχεια, πληκτρολογήστε control και πατήστε Enter για να ανοίξει Πίνακας Ελέγχου.

πίνακα ελέγχου

2.Κάντε κλικ στο κουμπί Υλικό και Ήχος στη συνέχεια, κάντε κλικ στο Επιλογές παροχής ενέργειας.

επιλογές τροφοδοσίας στον πίνακα ελέγχου

3. Στη συνέχεια από το αριστερό παράθυρο παραθύρου επιλέξτε «Επιλέξτε τι κάνουν τα κουμπιά τροφοδοσίας."

επιλέξτε τι διορθώνουν τα κουμπιά λειτουργίας USB που δεν αναγνωρίζεται

4. Τώρα κάντε κλικ στο «Αλλάξτε τις ρυθμίσεις που δεν είναι διαθέσιμες αυτήν τη στιγμή."

αλλάξτε τις ρυθμίσεις που δεν είναι διαθέσιμες αυτήν τη στιγμή

5. Καταργήστε την επιλογή "Ενεργοποιήστε την γρήγορη εκκίνηση» και κάντε κλικ στο Αποθήκευση αλλαγών.

Καταργήστε την επιλογή Ενεργοποίηση γρήγορης εκκίνησης

Μέθοδος 2: Εκτελέστε την αυτόματη επισκευή

1.Τοποθετήστε το DVD εγκατάστασης με δυνατότητα εκκίνησης των Windows 10 και κάντε επανεκκίνηση του υπολογιστή σας.

2.When prompted to πατήστε οποιοδήποτε πλήκτρο για εκκίνηση από CD ή DVD, πατήστε οποιοδήποτε πλήκτρο για να συνεχίσετε.

Πατήστε οποιοδήποτε πλήκτρο για εκκίνηση από CD ή DVD

3.Επιλέξτε τις προτιμήσεις γλώσσας και κάντε κλικ στο Επόμενο. Κάντε κλικ στην Επιδιόρθωση τον υπολογιστή σας κάτω αριστερά.

Επιδιόρθωση του υπολογιστή σας

4.Στην οθόνη επιλογής, κάντε κλικ Αντιμετώπιση προβλημάτων.

Επιλέξτε μια επιλογή στην επισκευή αυτόματης εκκίνησης των Windows 10

5.Στην οθόνη Αντιμετώπιση προβλημάτων, κάντε κλικ Προηγμένη επιλογή.

επιλέξτε σύνθετη επιλογή από την οθόνη αντιμετώπισης προβλημάτων

6.Στην οθόνη Επιλογές για προχωρημένους, κάντε κλικ Αυτόματη επισκευή ή επισκευή εκκίνησης.

εκτελέστε αυτόματη επισκευή

7.Περιμένετε μέχρι το Windows Automatic/Startup Repairs πλήρης.

8.Επανεκκινήστε και έχετε επιτυχώς Fix Computer does not start until restarted multiple times issue, αν όχι, συνεχίστε.

Επίσης, διαβάστε Πώς να διορθώσετε την αυτόματη επιδιόρθωση δεν μπόρεσε να επιδιορθώσει τον υπολογιστή σας.

Μέθοδος 3: Επαναφέρετε το BIOS στις προεπιλεγμένες ρυθμίσεις

1. Απενεργοποιήστε τον φορητό υπολογιστή σας, στη συνέχεια ενεργοποιήστε τον και ταυτόχρονα πατήστε F2, DEL ή F12 (ανάλογα με τον κατασκευαστή σας) για να συμμετάσχετε Ρύθμιση BIOS.

πατήστε το πλήκτρο DEL ή F2 για να μπείτε στο BIOS Setup

2.Τώρα θα πρέπει να βρείτε την επιλογή επαναφοράς σε φορτώστε την προεπιλεγμένη διαμόρφωση και μπορεί να ονομάζεται Επαναφορά στις προεπιλογές, Φόρτωση εργοστασιακών προεπιλογών, Εκκαθάριση ρυθμίσεων BIOS, Φόρτωση προεπιλογών ρύθμισης ή κάτι παρόμοιο.

φορτώστε την προεπιλεγμένη διαμόρφωση στο BIOS

3.Επιλέξτε το με τα πλήκτρα βέλους, πατήστε Enter και επιβεβαιώστε τη λειτουργία. Τα δικα σου BIOS θα το χρησιμοποιήσει τώρα προεπιλεγμένες ρυθμίσεις.

4.Once you’re logged into Windows see if you’re able to Fix Computer does not start until restarted multiple times issue.

Method 4: Check if hard disk is failing

In many cases, the issue occurs because of the failing hard disk and to check if this is the problem here you need to disconnect the hard disk from your PC and connect it to another PC and try to boot from it. If you can boot from the hard disk without any issue on the other PC then you can be sure that the issue is not related to it.

Ελέγξτε εάν ο σκληρός δίσκος του υπολογιστή είναι σωστά συνδεδεμένος

Another way to test your hard disk is download and burn the SeaTools for DOS on a CD then run the test to check if your hard disk is failing or not. You will need to set the first boot to CD/DVD from BIOS in order for this to work.

Μέθοδος 5: Ελέγξτε την τροφοδοσία ρεύματος

A faulty or failing Power Supply is generally the cause for PC not starting at the first boot. Because if the power consumption of hard disk is not met, it won’t get enough power to run and subsequently you may need to restart the PC several times before it can take the adequate power from PSU. In this case, you may need to replace the power supply with a new one or you could borrow a spare power supply to test if this is the case here.

Ελαττωματικό τροφοδοτικό

If you have recently installed a new hardware such as video card then chances are the PSU is not able to deliver the necessary power needed by the graphic card. Just temporary remove the hardware and see if this fixes the issue. If the issue is resolved then in order to use the graphic card you may need to purchase a higher voltage Power Supply Unit.

Method 6: Replace CMOS battery

If CMOS battery has dried up or no longer deliver powers then your PC won’t start and after few days it will eventually start hanging up. In order to fix the issue, it’s advised to replace your CMOS battery.

Μέθοδος 7: Επαναφορά ATX

Σημείωση: Αυτή η διαδικασία ισχύει γενικά για φορητούς υπολογιστές, οπότε αν έχετε υπολογιστή, αφήστε αυτήν τη μέθοδο.

1.Power off your laptop then remove the power cord, leave it for few minutes.

2. Τώρα αφαιρέστε την μπαταρία από πίσω και πατήστε παρατεταμένα το κουμπί λειτουργίας για 15-20 δευτερόλεπτα.

αποσυνδέστε την μπαταρία σας

Σημείωση: Μην συνδέσετε ακόμα το καλώδιο ρεύματος, θα σας πούμε πότε να το κάνετε αυτό.

3.Now plug in το καλώδιο τροφοδοσίας σας (η μπαταρία δεν πρέπει να τοποθετηθεί) και προσπαθείτε να εκκινήσετε τον φορητό υπολογιστή σας.

4.If it’s boot properly then again turn off your laptop. Put in the battery and again start your laptop.

If the problem is still there again turn off your laptop, remove power cord & battery. Press & hold the power button for 15-20 seconds and then insert the battery. Power on the laptop and this should fix the issue.

Now if any of the above methods weren’t helpful then it means the problem is with your motherboard and unfortunately, you need to replace it in order to fix the issue.

Συνιστάται:

Αυτό είναι που έχεις με επιτυχία Fix Computer does not start until restarted multiple times issue αλλά αν εξακολουθείτε να έχετε απορίες σχετικά με αυτόν τον οδηγό, μη διστάσετε να τις ρωτήσετε στην ενότητα των σχολίων.

διαχειριστής