Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Φροντίστε να δημιουργήσετε ένα σημείο επαναφοράς σε περίπτωση που κάτι πάει στραβά.
Μέθοδος 1: Απενεργοποιήστε προσωρινά το Antivirus και το Firewall
1. Κάντε δεξί κλικ στο Εικονίδιο προγράμματος προστασίας από ιούς από το δίσκο συστήματος και επιλέξτε Καθιστώ ανίκανο.
2.Στη συνέχεια, επιλέξτε το χρονικό πλαίσιο για το οποίο το Το Antivirus θα παραμείνει απενεργοποιημένο.
Σημείωση: Επιλέξτε το μικρότερο δυνατό χρονικό διάστημα, για παράδειγμα 15 λεπτά ή 30 λεπτά.
3.Once done, again check if the error resolves or not.
4.Πατήστε Windows Key + I και μετά επιλέξτε Πίνακας Ελέγχου.
5.Επόμενο, κάντε κλικ στο ΣΥΣΤΗΜΑ ΚΑΙ ΑΣΦΑΛΕΙΑ.
6.Στη συνέχεια κάντε κλικ στο Τείχος προστασίας των Windows.
7.Τώρα από το αριστερό παράθυρο παραθύρου κάντε κλικ στο Ενεργοποίηση ή απενεργοποίηση του Τείχους προστασίας των Windows.
8.Επιλέξτε Απενεργοποίηση τείχους προστασίας των Windows και επανεκκινήστε τον υπολογιστή σας. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Εάν η παραπάνω μέθοδος δεν λειτουργεί, φροντίστε να ακολουθήσετε τα ίδια ακριβώς βήματα για να ενεργοποιήσετε ξανά το Τείχος προστασίας.
Method 2: Delete Hidden Network Adapters
1.Πατήστε Windows Key + R και μετά πληκτρολογήστε devmgmt.msc και πατήστε Enter για άνοιγμα Διαχειριστή της συσκευής.
2. Τώρα επιλέξτε Προσαρμογείς δικτύου Και στη συνέχεια κάντε κλικ στο κουμπί Προβολή> Εμφάνιση κρυφών συσκευών.
3.Right-click on each of the hidden devices and select Απεγκατάσταση συσκευής.
4.Do this for all the hidden devices listed under Network Adapters.
5.Επανεκκινήστε τον υπολογιστή σας για να αποθηκεύσετε τις αλλαγές.
Method 3: Turn ON Network Discovery
1.Πατήστε Windows Key + X και μετά επιλέξτε Πίνακας Ελέγχου.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings από το αριστερό μενού.
4.Check mark Ενεργοποιήστε την ανακάλυψη δικτύου and click Save changes.
5.Επανεκκινήστε τον υπολογιστή σας για να αποθηκεύσετε τις αλλαγές και να δείτε αν μπορείτε Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.Πατήστε Windows Key + R και μετά πληκτρολογήστε ncpa.cpl και πατήστε Enter.
2.Right-click on your active Wi-Fi or ethernet connection and select Ιδιότητες.
3.Select 4 Πρωτόκολλο Internet Έκδοση (TCP / IPv4) και κάντε κλικ στο Ιδιότητες.
4.Τώρα κάντε κλικ Προηγμένη in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Ενεργοποιήστε το NetBIOS μέσω TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1.Πατήστε Windows Key + X και μετά επιλέξτε Πίνακας Ελέγχου.
2. Τύπος Πιστοποιητικό in the control panel search and click on Διαχειριστής διαπιστευτηρίων.
3.Select Πιστοποιητικά Windows και έπειτα κάντε κλικ στο Add a Windows credential.
4.One by one type the όνομα χρήστη και κωδικός of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Ιδιότητες.
2.Εναλλαγή σε Κοινή χρήση καρτέλας and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Μοιράσου αυτόν το φάκελο” and make sure the Share name is correct.
4. Κάντε κλικ στο Apply και στη συνέχεια στο OK.
Method 7: Change Network Security settings
1.Πατήστε Windows Key + R και μετά πληκτρολογήστε secpol.msc και πατήστε Enter.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3. Κάντε διπλό κλικ Ασφάλεια δικτύου: Επίπεδο ελέγχου ταυτότητας LAN Manager in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5. Κάντε κλικ στο Apply και στη συνέχεια στο OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Μέθοδος 8: Επαναφορά TCP / IP
1. Κάντε δεξί κλικ στο κουμπί των Windows και επιλέξτε «Γραμμή εντολών (Διαχειριστής)."
2. Τώρα πληκτρολογήστε την ακόλουθη εντολή και πατήστε enter μετά από κάθε μία:
(α) ipconfig /release
(β) ipconfig /flushdns
(γ) ipconfig /ανανέωση
3. Ανοίξτε ξανά τη Γραμμή εντολών Admin και πληκτρολογήστε τα παρακάτω και πατήστε enter μετά από κάθε ένα:
- ipconfig / flushdns
- nbtstat -r
- netsh int ip reset
- netsh winsock επαναφορά
4.Επανεκκινήστε για να εφαρμόσετε αλλαγές.
Συνιστάται για εσένα:
Αυτό είναι που έχεις με επιτυχία Fix Error code 0x80070035 The network path was not found αλλά αν εξακολουθείτε να έχετε ερωτήσεις σχετικά με αυτήν την ανάρτηση, μην διστάσετε να τις ρωτήσετε στην ενότητα των σχολίων.