When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Επιθέσεις ιού ή κακόβουλου λογισμικού.
- Ξεπερασμένο λειτουργικό σύστημα.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe εικονίδιο.
2. If the status is set to Μη συνδεδεμένο, Κάνε κλικ στο Network globe icon, choose your Wi-Fi network and click on Connect button. Make sure Λειτουργία πτήσης δεν είναι ενεργοποιημένο.
3. If you again face the same network connection error code, then click on the Αποσύνδεση button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Κάντε δεξί κλικ στο Εικονίδιο Wi-Fi και επιλέξτε Ανοίξτε τις ρυθμίσεις δικτύου και Διαδικτύου.
6. Κάντε κλικ στο Wi-Fi.
7. Scroll down the right menu, click on Διαχείριση γνωστών δικτύων.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Ξεχνάμε.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Μέθοδος 2: Επανεκκινήστε το δρομολογητή
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Σημείωση: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Βρες το κουμπί τροφοδοσίας at the back of your router.
2. Press the button once to κλείσ 'το.
3. Τώρα, αποσυνδέστε σας Router power cable και περιμένετε μέχρι να αδειάσει τελείως η ισχύς από τους πυκνωτές.
4. Τότε, επανασύνδεση ο καλώδιο τροφοδοσίας και ενεργοποιήστε το μετά από ένα λεπτό.
5. Wait until the network connection is re-established and try signing in again.
Διαβάστε επίσης: Fix Computers Not Showing Up on Network in Windows 10
Μέθοδος 3: Εκτέλεση εργαλείου αντιμετώπισης προβλημάτων δικτύου
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Πατήστε το κουμπί Πλήκτρο Windows και τον τύπο Αντιμετώπιση προβλημάτων των ρυθμίσεων στη γραμμή αναζήτησης και Ανοίξτε.
2. Κάντε κλικ στο Πρόσθετα εργαλεία αντιμετώπισης προβλημάτων.
3. επιλέξτε Προσαρμογέας Δικτύου και κάντε κλικ στο Εκτελέστε το εργαλείο αντιμετώπισης προβλημάτων.
4. Select the network adapter to diagnose και κάντε κλικ στο Επόμενο.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, κάντε κλικ στο Κλείστε το εργαλείο αντιμετώπισης προβλημάτων.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Διαβάστε επίσης: Διορθώστε ότι η Οικογενειακή κοινή χρήση YouTube TV δεν λειτουργεί
Μέθοδος 4: Επιδιόρθωση αρχείων συστήματος
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Έλεγχος αρχείων συστήματος) /DISM (Εκπαίδευση και διαχείριση εικόνας ανάπτυξης) utilities on your Windows 10 PC.
1. Πατήστε το κουμπί Πλήκτρο Windows, τύπου Γραμμή εντολών και κάντε κλικ στο Εκτέλεση ως διαχειριστής.
2. Κάντε κλικ στο Ναι στο Έλεγχος λογαριασμού χρήστη προτροπή.
3. Τύπος chkdsk C: / f / r / x εντολή και χτύπημα Εισάγετε κλειδί.
4. Εάν σας ζητηθεί ένα μήνυμα, Το Chkdsk δεν μπορεί να εκτελεστεί…ο τόμος είναι… σε διαδικασία χρήσης, στη συνέχεια, πληκτρολογήστε Y και πατήστε το Εισάγετε κλειδί.
5. Πληκτρολογήστε ξανά την εντολή: sfc / scannow και πατήστε το πλήκτρο Εισάγετε κλειδί για να εκτελέσετε το Έλεγχος αρχείων συστήματος σάρωση.
Σημείωση: Θα ξεκινήσει μια σάρωση συστήματος και θα χρειαστούν μερικά λεπτά για να ολοκληρωθεί. Εν τω μεταξύ, μπορείτε να συνεχίσετε να εκτελείτε άλλες δραστηριότητες, αλλά προσέξτε να μην κλείσετε κατά λάθος το παράθυρο.
Μετά την ολοκλήρωση της σάρωσης, θα εμφανιστεί ένα από τα παρακάτω μηνύματα:
- Η προστασία πόρων των Windows δεν βρήκε παραβιάσεις ακεραιότητας.
- Η προστασία πόρων των Windows δεν μπόρεσε να εκτελέσει την απαιτούμενη λειτουργία.
- Η Προστασία πόρων των Windows βρήκε κατεστραμμένα αρχεία και τα επιδιορθώνει με επιτυχία.
- Η Προστασία πόρων των Windows βρήκε κατεστραμμένα αρχεία, αλλά δεν ήταν σε θέση να διορθώσει κάποια από αυτά.
6. Μόλις ολοκληρωθεί η σάρωση, επανεκκίνηση υπολογιστή σας.
7. Και πάλι, εκτόξευση Γραμμή εντολών ως διαχειριστής και εκτελέστε τις εντολές που δίνονται η μία μετά την άλλη:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Σημείωση: Για να εκτελέσετε σωστά τις εντολές DISM, πρέπει να έχετε σύνδεση στο διαδίκτυο που λειτουργεί.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Πατήστε το κουμπί Πλήκτρο Windows και τον τύπο Διαχείριση Συσκευών in the Windows search menu. Click on Ανοικτό.
2. Αναπτύξτε το προσαρμογείς δικτύου section by double-clicking on it.
3. Κάντε δεξί κλικ στο δικό σας Πρόγραμμα οδήγησης δικτύου (για παράδειγμα, Intel (R) Dual Band Wireless-AC 3168) Και επιλέξτε το Απενεργοποιήστε τη συσκευή επιλογή.
4. Confirm the below prompt by clicking on Ναι.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Ενεργοποιήστε τη συσκευή επιλογή.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Διαβάστε επίσης: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Μεταβείτε στο μενού αναζήτησης και πληκτρολογήστε cmd. Κάντε κλικ στο Εκτέλεση ως διαχειριστής.
2. Πληκτρολογήστε τα ακόλουθα εντολές και πατήστε το Εισάγετε κλειδί.
netsh winsock επαναφορά netsh int ip reset ipconfig / release ipconfig / ανανέωση
3. Περιμένετε να εκτελεστούν οι εντολές και επανεκκινήστε τον υπολογιστή σας.
Μέθοδος 7: Ξεπλύνετε την προσωρινή μνήμη DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Εκτόξευση Γραμμή εντολών by searching in the Windows μενού and click on Run as administrator.
2. Τύπος ipconfig / flushdns in the command window and hit εισάγετε.
Διαβάστε επίσης: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Ξεκινήστε το τρέξιμο παράθυρο διαλόγου πατώντας Πλήκτρα Windows + R μαζί.
2. Τύπος ncpa.cpl και χτύπησε Εισάγετε κλειδί.
3. Right-click on your active προσαρμογέα δικτύου και κάντε κλικ στο Ιδιοκτησίες.
4. Καταργήστε την επιλογή του Internet Protocol Version 6 (TCP / IPv6) επιλογή.
5. Τέλος, κάντε κλικ στο OK to save the changes and check if the issue is resolved.
Σημείωση: If you use multiple network connections, navigate to Κέντρο δικτύου και κοινής χρήσης και Αλλάξτε τον προσαρμογέα settings. Right-click on the adapter and select Απενεργοποίηση. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Τύπος Διαχείριση Συσκευών in the Windows search menu and click Ανοικτό.
2. Κάντε διπλό κλικ στο προσαρμογείς δικτύου για να το επεκτείνει.
3. Κάντε δεξί κλικ στο δικό σας οδηγός (π.χ Intel (R) διπλής ζώνης Wireless-AC 3168) και κάντε κλικ Ενημέρωση προγράμματος οδήγησης.
4. Κάντε κλικ στο Περιηγηθείτε στον υπολογιστή μου για προγράμματα οδήγησης to locate and install a driver manually.
5. Κάντε κλικ στο πρόγραμμα περιήγησης button to choose any directory and click on Επόμενο.
5A. The drivers will be updated to the latest version if they are not updated.
5Β. Εάν βρίσκονται ήδη σε ενημερωμένο στάδιο, στην οθόνη εμφανίζεται το ακόλουθο μήνυμα: Τα καλύτερα προγράμματα οδήγησης για τη συσκευή σας είναι ήδη εγκατεστημένα.
6. Κάντε κλικ στο Κλεισιμο για έξοδο από το παράθυρο.
7. επανεκκίνηση the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Εκτόξευση Διαχείριση Συσκευών from the Windows search menu.
2. Κάντε δεξί κλικ στο οδηγός και επιλέξτε Καταργήστε την εγκατάσταση της συσκευής.
3. A warning prompt will be displayed on the screen. Check the box “Διαγράψτε το λογισμικό προγράμματος οδήγησης για αυτήν τη συσκευή” and confirm the prompt by clicking απεγκατάσταση.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Επισκεφτείτε το του κατασκευαστή.
2. Εύρεση και Λήψη the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the κατεβασμένο αρχείο και ακολουθήστε τις οδηγίες που δίνονται για να το εγκαταστήσετε.
Διαβάστε επίσης: Πώς να ρυθμίσετε ένα VPN στα Windows 10
Μέθοδος 10: Ενημερώστε τα Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Πάτα το Windows + I πλήκτρα μαζί για να ανοίξει ρυθμίσεις Στον υπολογιστή σας.
2. επιλέξτε Ενημέρωση & Ασφάλεια.
3. επιλέξτε Έλεγχος για ενημερώσεις.
4A. Click Εγκατάσταση τώρα to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Είσαι ενημερωμένος μήνυμα.
Μέθοδος 11: Απεγκατάσταση πρόσφατων ενημερώσεων
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. πατήστε και κρατήστε πατημένο Πλήκτρα Windows + R μαζί για να ανοίξει το τρέξιμο κουτί διαλόγου.
2. Τύπος appwiz.cpl και χτύπησε εισάγετε.
3. Κάντε κλικ στο Προβολή εγκατεστημένων ενημερώσεων.
4. Select the most recent update and click on απεγκατάσταση.
5. Confirm the prompt, if any, and επανεκκινήστε τον υπολογιστή.
Διαβάστε επίσης: Πώς να διορθώσετε το Firefox που δεν φορτώνει τις σελίδες
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the προσαρμογείς δικτύου installed in your PC along with their settings. All the stored settings are stored to default settings.
Σημείωση: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to ρυθμίσεις τότε σύστημα και Σχετικά. Once you have reset your network, you have to reinstall all networking software Μου αρέσει πελάτες VPN or Εικονικοί διακόπτες.
1. πατήστε και κρατήστε πατημένο Κλειδιά Windows + I μαζί για να ανοίξει Ρυθμίσεις των Windows.
2. Κάντε κλικ στο Δίκτυο & Διαδίκτυο.
3. Κάντε κλικ στο Επαναφορά δικτύου υπό Κατάσταση.
4. Επιβεβαιώστε την προτροπή κάνοντας κλικ στο Επαναφορά τώρα.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Συνιστάται:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.