Wyze camera is a popular smart home camera that comes with varieties of features. You can get a wired as well as wireless cameras for security, indoor or outdoor use from Wyze. However, there are also few errors that may occur while using the camera. One of such is Wyze error code 90. We bring to you a perfect guide that will teach you how to fix Wyze camera error. So, continue reading!
How to Fix Wyze Camera Error Code 90
Wyze camera offers various features like color night vision, indoor and outdoor capturing with weather resistance feature, personal detection and many more. But there are also a few common error codes that may occur while using the camera. One of such is Wyze cam connection failed error code 90. Here, we have listed the possible troubleshooting methods to fix this camera error.
Μέθοδος 1: Αντιμετώπιση προβλημάτων συνδεσιμότητας στο Διαδίκτυο
Wyze error code 90 may mainly due to improper internet connection. So, try to modify the network settings. Wyze camera normally support Εύρος ζώνης 2.4 GHz, not 5 GHz. Also, your network should be secured with WPA/WPA2 protocol. And, make sure that your WiFi mode is set to 802.11 b / g / n. Read our ultimate smartphone troubleshooting guide, then follow the steps in the method to troubleshoot network connectivity.
Method 2: Power Cycle Wyze Camera
If there is no issue with your internet connection, then check if the hardware connection is good. Also, you can try to power cycle Wyze camera to fix Wyze error code 90 issue as shown in the steps below.
1. Αφαιρέστε το Wyze Camera από την πρίζα.
2. Περιμένετε μερικά λεπτά.
3. Τότε, re-plug the Camera.
4. Τώρα, turn on the Camera.
Διαβάστε επίσης: Διορθώστε τον κωδικό σφάλματος Wyze 06 στο Android
Method 3: Re-add Camera in Wyze App
Next method to fix Wyze error code 90 is to re-add the connected camera in the Wyze app. Follow these steps to do so.
1. Ανοίξτε το wyze app.
2. Select the connected device.
3. Εδώ, πατήστε Διαγραφή συσκευής επιλογή.
4. After removing the device, launch the Wyze app again and tap on the Νέα συσκευή κουμπί.
5. Αγγίξτε το κάμερες καρτέλα στο ΚΑΤΗΓΟΡΙΕΣ τμήμα.
6. Αγγίξτε το τύπος κάμερας θα θέλατε να προσθέσετε.
Σημείωση: Η Σταθμός Βάσης Wyze η κάμερα έχει επιλεγεί για παράδειγμα.
7. Αγγίξτε το Επόμενο κουμπί για να συνδέσετε το κινητό σας στο δίκτυο Wyze Camera.
8. Μετά το μπλε φως αναβοσβήνει στο δρομολογητή και στο σταθμό βάσης, πατήστε στο Επόμενο κουμπί για σύνδεση στο σταθμό.
Μέθοδος 4: Ενημερώστε την εφαρμογή Wyze
If your Wyze app is outdated, then you may face Wyze camera error code 90. So, to fix this problem follow the steps listed below to update the Wyze app.
1. ανοιχτό Play Store της Google από το μενού του τηλεφώνου.
2. Στη γραμμή αναζήτησης, πληκτρολογήστε wyze.
3. Εντοπίστε και πατήστε στο app από τα αποτελέσματα αναζήτησης.
4. Αγγίξτε το Ενημέρωση κουμπί για να εγκαταστήσετε την πιο πρόσφατη ενημέρωση.
5. Περιμένετε να εγκατασταθεί η ενημέρωση και επανεκκίνηση η εφαρμογή.
Check if Wyze cam connection failed issue still persists or not.
Διαβάστε επίσης: Διορθώστε το σφάλμα Google Play Store κατά τον έλεγχο για ενημερώσεις
Μέθοδος 5: Ενημερώστε το υλικολογισμικό της κάμερας
If updating the Wyze app did not fix camera error. Follow the steps given below to solve Wyze error code 90 issue.
1. Ξεκινήστε το wyze app from the app menu.
2. Πλοηγηθείτε στο Λογαριασμός μενού στην εφαρμογή Wyze.
3. Αγγίξτε το firmware Update Tab.
4. Επιλέξτε το συγκεκριμένο φωτογραφική μηχανή για να ενημερώσετε το υλικολογισμικό του.
Σημείωση: Μπορείτε εναλλακτικά να πατήσετε στο Ενημέρωση όλων κουμπί για να ενημερώσετε τις κάμερες στο δίκτυο.
Method 6: Reset Wyze Camera
If the Wyze cameras aren’t properly configured with the application, then it can cause Wyze error code 90 problem. You can fix this issue by resetting the Wyze camera.
1. Remove the SD card from Wyze camera.
2. Then, manually press the Επαναφορά κουμπί στην κάμερα και περιμένετε να σβήσει η κίτρινη λυχνία LED.
Σημείωση 1: Εάν η λυχνία LED αναβοσβήνει με κίτρινο χρώμα, σημαίνει ότι η κάμερα Wyze επανέρχεται στις προεπιλεγμένες ρυθμίσεις.
Σημείωση 2: Εάν η λυχνία δεν αλλάξει μετά από λίγα δευτερόλεπτα, πρέπει να επικοινωνήσετε με το κέντρο σέρβις για να διορθώσετε το πρόβλημα στη συσκευή υλικού.
3. Now, connect your device and check if it fixes Wyze cam connection failed issue.
Επίσης, διαβάστε: Διορθώστε το Σφάλμα Απαιτείται έλεγχος ταυτότητας Google Play στο Android
Μέθοδος 7: Επανεγκαταστήστε την εφαρμογή Wyze
If the issue is with the Wyze app, you can try reinstalling the app on device to fix camera error. Here are the steps to do so.
1. Ανοίξτε το Play Store app.
2. Τώρα, πατήστε στο λογαριασμό σας εικονίδιο στην επάνω δεξιά γωνία.
3. Στη συνέχεια, επιλέξτε Διαχειριστείτε εφαρμογές και συσκευή.
4. Μετακινηθείτε στο Διαχειριστείτε καρτέλα, επιλέξτε το wyze εφαρμογή και πατήστε στο σκουπίδια εικονίδιο στην κορυφή.
5. Αγγίξτε το απεγκατάσταση πατήστε στο παράθυρο επιβεβαίωσης και περιμένετε μέχρι να απεγκατασταθεί η εφαρμογή.
6. Then, tap on the search bar on the home screen, search for the wyze εφαρμογή και πατήστε στο search εικονίδιο.
7. Αγγίξτε το εγκαταστήστε κουμπί για να εγκαταστήσετε την εφαρμογή Wyze και περιμένετε μέχρι να ολοκληρωθεί η διαδικασία εγκατάστασης.
Method 8: Reflash Camera Firmware
If the above methods do not fix camera error, then reflash camera firmware by following the steps below to fix Wyze error code 90 problem.
1. Αφαιρέστε το Κάρτα SD from Camera and connect it in your PC.
2. Στη συνέχεια, μεταβείτε στο αυτό το PC φάκελο και κάντε δεξί κλικ στο Κάρτα SD, Επιλέξτε το Μορφή… επιλογή.
3. After formatting the SD card, visit wyze released firmware page.
4. Λήψη το υλικολογισμικό από τη σελίδα.
5. Rename the downloaded file as demo.bin.
Σημείωση: Μετονομάστε το αρχείο ως demo_wcv3.bin if you have Wyze version 3 camera.
6. Copy the file in the SD card folder.
7. Τώρα, τοποθετήστε την κάρτα SD in the Wyze camera and turn on the device.
8. Next, hold the select/reset button in Wyze camera until lights turns purple.
9. Finally, release the button and wait for 3-4 minutes to initiate flashing process.
Διαβάστε επίσης: Διορθώστε το Android USB File Transfer που δεν λειτουργεί στα Windows 10
Μέθοδος 9: Επικοινωνήστε με την Υποστήριξη της Wyze
Lastly, try contacting Wyze Support to fix Wyze camera error code 90 as shown below.
1. Ανοίξτε το wyze app.
2. Στην κάτω δεξιά γωνία, πατήστε το Λογαριασμός Tab.
3. Αγγίξτε το Υποστήριξη Wyze.
4. Αγγίξτε το Υποβάλετε ένα αρχείο καταγραφής.
5. Πατήστε Εφαρμογή και υπηρεσίες Wyze.
6. Αγγίξτε το Εκδηλώσεις Tab.
7. Επιλέξτε το αρχείο πολυμέσων στο Περιγραφή ενότητα και πατήστε στο Υποβολη κουμπί.
Hence, these are the steps to solve Wyze cam connection failed problem.
Συνιστάται:
Ελπίζουμε ότι αυτός ο οδηγός ήταν χρήσιμος για εσάς και μπορέσατε να το διορθώσετε Wyze camera error code 90. Let us know which method worked for you. If you have any suggestions for us, please let us know in the comment section.