When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Malmoderna Operaciumo.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikono.
2. If the status is set to Ne konektita, alklaku la Network globe icon, choose your Wi-Fi network and click on konekti button. Make sure Aviadila reĝimo ne estas ŝaltita.
3. If you again face the same network connection error code, then click on the Malkonkonekti button, wait for some time and reconnect it again.
4. Try connecting to a different Wifi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Dekstre alklaku la Ikono de Wi-Fi kaj elektu Open Network & Internet settings.
6. Alklaku Wifi.
7. Scroll down the right menu, click on Administri konatajn retojn.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Forgesu.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Metodo 2: Rekomencu enkursigilon
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Noto: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Trovu la Potenca butono ĉe la malantaŭo de via enkursigilo.
2. Premu la butonon unufoje por malŝaltu ĝin.
3. Nun, malkonekti via Router power cable kaj atendu ĝis la potenco estas tute drenita de la kondensiloj.
4. Tiam, rekonekti la potenca kablo kaj ŝaltu ĝin post minuto.
5. Atendu ĝis la reto-konekto estas reestablita kaj provu ensaluti denove.
Ankaŭ Legu: Fix Computers Not Showing Up on Network in Windows 10
Metodo 3: Kuru Reto-Problemon
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Batu la Vindozo-ŝlosilo kaj tajpu Solvi agordojn en la serĉobreto kaj Malferma.
2. Alklaku Pliaj problemoj.
3. Elektu Reto-Adaptilo kaj alklaku Rulu la solvoj.
4. Select the network adapter to diagnose kaj alklaku sekva.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, alklaku Fermu la problemon.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Ankaŭ Legu: Ripari Familia Kundividon YouTube TV Ne Funkcias
Metodo 4: Ripari Sistemajn Dosierojn
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Sistema Dosiero-Kontrolilo) /DISM (Disfaldado Bildoservado kaj Administrado) utilities on your Windows 10 PC.
1. Batu la Vindozo-ŝlosilo, tipo komando Prompt kaj alklaku Ruli kiel administranto.
2. Alklaku Jes en la Uzanto Kontrolo Kontrolo prompto.
3. Tajpu ĉkdsk C: / f / r / x komandu kaj batis Enigu ŝlosilon.
4. Se oni petas vin per mesaĝo, Chkdsk ne povas ruliĝi...la volumo estas... en uza procezo, do, tajpu Y kaj batis la Enigu ŝlosilon.
5. Denove, tajpu la komandon: sfc / scannow kaj gazetaro Enigu ŝlosilon por funkciigi la Sistema Dosiero-Kontrolilo skani.
Noto: Sistema skanado estos komencita kaj ĝi daŭros kelkajn minutojn por fini. Dume, vi povas daŭrigi fari aliajn agadojn sed atentu ne hazarde fermi la fenestron.
Fininte la skanadon, ĝi montros iun el ĉi tiuj mesaĝoj:
- Vindoza Rimedo-Protekto ne trovis iujn ajn malobservojn de integreco.
- Windows Resource Protection ne povis plenumi la petitan operacion.
- Windows Resource Protection trovis koruptajn dosierojn kaj sukcese riparis ilin.
- Windows Resource Protection trovis koruptajn dosierojn sed ne povis ripari iujn el ili.
6. Post kiam la skanado estas finita, rekomenci via komputilo.
7. Denove, lanĉi Komanda instigo kiel administranto kaj plenumu la donitajn komandojn unu post la alia:
dism.exe /Enreta /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Enreta /cleanup-image /startcomponentcleanup
Noto: Vi devas havi funkciantan interretan konekton por ekzekuti DISM-komandojn ĝuste.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Batu la Vindozo-ŝlosilo kaj tajpu Administranto de aparatoj in the Windows search menu. Click on malfermita.
2. Pligrandigi la Retradukiloj sekcio per duobla klako sur ĝi.
3. Dekstre alklaku vian Reta ŝoforo (ekzemple, Intel (R) Dual Band Wireless-AC 3168) kaj elektu la Malebligu mekanismon elekto.
4. Confirm the below prompt by clicking on Jes.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Ebligu aparaton elekto.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Ankaŭ Legu: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Iru al la serĉmenuo kaj tajpu cmd. Alklaku Ruli kiel administranto.
2. Tajpu la jenon ordonoj kaj batis la Enigu ŝlosilon.
netsh winsock reset netsh int ip reset ipconfig / liberigo ipconfig / renovigi
3. Atendu ke la komandoj estos ekzekutitaj kaj restartigu vian komputilon.
Metodo 7: Fluŝu DNS-Kaŝmemoron
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Ĵeto komando Prompt by searching in the fenestroj menuo and click on Run as administrator.
2. Tajpu ipconfig / flushdns in the command window and hit Enigu.
Ankaŭ Legu: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lanĉu la Kuri dialogujo per premado Vindozo + R klavoj kune.
2. Tajpu ncpa.cpl kaj batis Enigu ŝlosilon.
3. Right-click on your active reto-adaptilo kaj alklaku Propraĵoj.
4. Malmarku la Interreta Protokolo Versio 6 (TCP / IPv6) elekto.
5. Fine, alklaku OK to save the changes and check if the issue is resolved.
Noto: If you use multiple network connections, navigate to Reto kaj Sharing Centro kaj Ŝanĝu adaptilon settings. Right-click on the adapter and select Malebligi. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tajpu Administranto de aparatoj in the Windows search menu and click malfermita.
2. Duoble alklaku la Retradukiloj pligrandigi ĝin.
3. Dekstre alklaku vian ŝoforo (ekz Intel(R) Duobla Bando Sendrata-AC 3168) kaj alklaku Isdatigi ŝoforon.
4. Alklaku Trarigardi mian komputilon pri ŝoforoj to locate and install a driver manually.
5. Alklaku la Foliumilo button to choose any directory and click on sekva.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Se ili jam estas en ĝisdatigita stadio, la ekrano montras la sekvan mesaĝon, La plej bonaj peliloj por via aparato jam estas instalitaj.
6. Alklaku Fermi eliri el la fenestro.
7. Rekomenci the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Ĵeto Administranto de aparatoj from the Windows search menu.
2. Dekstre alklaku la ŝoforo kaj elektu Malinstalu mekanismon.
3. A warning prompt will be displayed on the screen. Check the box “Forigu la pelilon programon por ĉi tiu aparato” and confirm the prompt by clicking Malinstali.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Vizitu la retejo de fabrikanto.
2. trovi kaj Elŝuti the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the elŝutita dosiero kaj sekvu la donitajn instrukciojn por instali ĝin.
Ankaŭ Legu: Kiel agordi VPN en Vindozo 10
Metodo 10: Ĝisdatigu Vindozon
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Premu la Vindozo + I klavoj kune malfermi Agordoj en via komputilo.
2. Elektu Ĝisdatigo kaj Sekureco.
3. Elektu Kontrolu ĝisdatigojn.
4A. Click instali nun to download and install the latest update available.
4B. If your system is already up-to-date, then it will show Vi estas ĝisdatigita mesaĝo.
Metodo 11: Malinstalu Lastajn Ĝisdatigojn
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Premu kaj tenu Vindozo + R klavoj kune malfermi la Kuri dialogujo.
2. Tajpu appwiz.cpl kaj batis Enigu.
3. Alklaku Rigardu instalitajn ĝisdatigojn.
4. Select the most recent update and click on Malinstali.
5. Confirm the prompt, if any, and rekomencu la komputilon.
Ankaŭ Legu: Kiel Ripari Firefox Ne Ŝarĝante Paĝojn
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
Noto: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Agordoj tiam sistemo kaj Pri. Once you have reset your network, you have to reinstall all networking software kiel VPN-klientoj or Virtualaj ŝaltiloj.
1. Premu kaj tenu Vindozo + I klavoj kune malfermi Fenestroj.
2. Alklaku Reto kaj Interreto.
3. Alklaku Reta rekomencita sub Statuso.
4. Konfirmu la instigon klakante sur Restarigu nun.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
rekomendita:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.