Fix Error 1962: No Operating System Found: If you are facing this error then it may be because of corrupt boot sequence or the boot order priority might be not configured correctly. In any case, you when you try to boot your PC you won’t be able to boot your operating system instead you will be faced with the Error 1962 No Operating System Found message and you won’t have any option but to restart your PC which will again land you on the same error message screen.
Error 1962: No operating system found. Boot sequence will automatically repeat.
The strange thing with the error 1962 is that user might be able to successfully boot to Windows after waiting for few hours but that might not be the case with everyone. So you can check if you can access your system after waiting for few hours. Whereas some affected users can’t even get into BIOS setup as the Error 1962 No Operating System Found message is displayed immediately after the computer boots up.
Well, now you know enough about error 1962 let’s see how to actually fix this error. The good thing about this error it can also be caused simply because of faulty SATA cable which connects your Hard disk to the motherboard. So you need to perform various checks in order to determine the cause of Error 1962 No Operating System Found message on boot. Without wasting any time let’s see how to actually fix this issue with the below-listed troubleshooting methods.
Error 1962: No Operating System Found [SOLVED]
Before trying any advanced steps we need to check whether it’s a case of faulty Hard disk or the SATA cable. In order to check if the hard disk is working or not, connect it to another computer and verify if you’re able to access it, if you’re able to then it’s not the case of the faulty Hard disk. But if you’re still not able to access the hard disk on another PC then you need to replace your Hard disk.
Now check if the SATA cable is at fault, just use another PC cable in order to check if the cable is faulty. If this is the case then simply buying another SATA cable might fix the issue for you. Now that you have verified if it’s not the case of faulty HDD or SATA cable then you can continue to the below-listed steps.
Nota: In order to try below fixes you need to use Windows Installation or Recovery disc, so make sure you are ready with any one of them before hand.
Método 1: ejecutar la reparación automática/de inicio
1.Inserte el DVD de instalación de arranque de Windows 10 y reinicie su PC.
2.Cuando se le solicite que presione cualquier tecla para iniciar desde CD o DVD, presione cualquier tecla para continuar.
3.Seleccione sus preferencias de idioma y haga clic en Siguiente. Haga clic en reparar su computadora en la parte inferior izquierda.
4.En la pantalla de elegir una opción, haga clic en Solucionar problemas.
5.En la pantalla Solucionar problemas, haga clic en Opción avanzada.
6.En la pantalla Opciones avanzadas, haga clic en Reparación automática o reparación de inicio.
7.Wait til the Reparaciones automáticas/de inicio de Windows completa.
8.Reinicie y tendrá éxito. Fix Error 1962 No Operating System Found.
Además, lee Cómo reparar la reparación automática no pudo reparar su PC.
Method 2: Run Diagnostic Test
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Para ejecutar los Diagnósticos, reinicie su PC y cuando la computadora se inicie (antes de la pantalla de inicio), presione la tecla F12 y cuando aparezca el menú de Inicio, resalte la opción Arrancar en la partición de utilidades o la opción Diagnóstico y presione Intro para iniciar los Diagnósticos. Esto verificará automáticamente todo el hardware de su sistema y le informará si encuentra algún problema.
Method 3: Set correct boot order
You may be seeing the “Error 1962 No Operating System Found” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1.Cuando se inicie su computadora (antes de la pantalla de inicio o la pantalla de error), presione repetidamente Eliminar o la tecla F1 o F2 (dependiendo del fabricante de su computadora) para ingrese a la configuración del BIOS.
2. Una vez que esté en la configuración del BIOS, seleccione la pestaña Arranque de la lista de opciones.
3.Ahora asegúrese de que la computadora Hard disk or SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Once above changes are done move to the Startup tab and make the following changes:
Primary Boot Sequence
CSM: [Enable]
Boot Mode: [Auto]
Boot Priority: [UEFI First]
Quick Boot: [Enable]
Boot up Num-lock Status: [On]
5.Press F10 to save and exit changes in the BIOS setup.
Método 4: habilitar el arranque UEFI
Most UEFI firmware (Unified Extensible firmware Interface) either contains bugs or are misleading. This is because of the frequent evolution of the firmware which has made UEFI too complicated. The Error 1962 No Operating System Found seems to be caused by UEFI firmware and when you reset or set the default value of UEFI it seems to fix the issue.
You have to configure CSM (Compatibility Support Module) to enable if you want to boot to a legacy Operating System (OS). If you have recently upgraded your Windows installation then this setting is disabled by default which disables the support for the older Operating System’s which in turn won’t let you boot to OS. Now be careful to set the UEFI as the first or only boot method (which is already the default value).
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Go to the Startup tab and make the following changes:
Cambie la opción de lista de inicio a UEFI Deshabilitar Cargar ROM de opción heredada Habilitar arranque seguro
3.A continuación, toque F10 para guardar y salir de la configuración de inicio.
Method 5: Restore your PC using Recovery Disc
1. Coloque el medio de instalación de Windows o la Unidad de recuperación/Disco de reparación del sistema y seleccione su l.preferencias de idiomay haga clic en Siguiente
2.Click Reparacion su computadora en la parte inferior.
3.Ahora elige Solucionar problemas y luego Opciones avanzadas.
4..Finalmente, haga clic en “Restaurar sistema”Y siga las instrucciones en pantalla para completar la restauración.
5.Restart your PC and this step may have Fix Error 1962 No Operating System Found.
Método 6: reparar instalar Windows 10
Si ninguna de las soluciones anteriores funciona para usted, puede estar seguro de que su disco duro está bien, pero es posible que vea el error "Error 1962 No Operating System Found”Porque el sistema operativo o la información BCD en el disco duro se borraron de alguna manera. Bueno, en este caso, puedes intentar reparar la instalación de Windows, pero si esto también falla, la única solución que queda es instalar una nueva copia de Windows (instalación limpia).
Recomendado para ti:
Eso es todo lo que has logrado Fix Error 1962: No Operating System Found pero si todavía tiene alguna pregunta sobre esta guía, no dude en hacerla en la sección de comentarios.