When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Ataque de malware o virus.
- Sistema operativo desactualizado.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe del icono.
2. If the status is set to No conectado, Haga clic en el Network globe icon, choose your Wi-Fi network and click on Contacto button. Make sure Modo avión no está encendido.
3. If you again face the same network connection error code, then click on the Desconectar button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Haga clic derecho en el Icono de Wi-Fi y seleccionar Abra Configuración de red e Internet.
6. Hacer clic en Wi-Fi.
7. Scroll down the right menu, click on Administrar redes conocidas.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Olvidar.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Método 2: reiniciar el enrutador
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Nota: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Encuentra el El botón de encendido en la parte posterior de su enrutador.
2. Presione el botón una vez para apágalo.
3. Ahora desconectar su proveedor Router power cable y espere hasta que la energía se agote por completo de los condensadores.
4. Entonces, reconnect las cable de energía y enciéndalo después de un minuto.
5. Espere hasta que se restablezca la conexión de red y intenta iniciar sesión nuevamente.
Lea también Reparar computadoras que no aparecen en la red en Windows 10
Método 3: ejecutar el solucionador de problemas de red
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Presione el Tecla de Windows y el tipo Solucionar problemas de configuración en la barra de búsqueda y Abierta.
2. Hacer clic en Solucionadores de problemas adicionales.
3. Seleccionar Adaptador de red y haga clic en Ejecutar el solucionador de problemas.
4. Select the network adapter to diagnose y haga clic en Siguiente.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, haga clic en Cerrar el solucionador de problemas.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lea también Fix Family Sharing YouTube TV Not Working
Método 4: reparar archivos del sistema
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Comprobador de archivos de sistema) /DISM (Servicio y gestión de imágenes de implementación) utilities on your Windows 10 PC.
1. Presione el Tecla de Windows, tipo Símbolo del sistema y haga clic en Ejecutar como administrador.
2. Hacer clic en Sí existentes Control de cuentas de usuario rápido.
3. Escribe chkdsk C: / f / r / x manda y golpea Introducir clave.
4. Si aparece un mensaje, Chkdsk no puede ejecutarse... el volumen está... en proceso de uso, luego, escriba Y y pulsa el Introducir clave.
5. Again, type the command: sfc / scannow y pulse Introducir clave ejecutar el Comprobador de archivos de sistema escanear.
Nota: Se iniciará un análisis del sistema y tardará un par de minutos en finalizar. Mientras tanto, puedes seguir realizando otras actividades, pero ten cuidado de no cerrar la ventana accidentalmente.
After completing the scan, it will show either of these messages:
- Protección de recursos de Windows no encontró ninguna violación de integridad.
- La protección de recursos de Windows no pudo realizar la operación solicitada.
- La Protección de recursos de Windows encontró archivos corruptos y los reparó satisfactoriamente.
- Windows Resource Protection encontró archivos corruptos pero no pudo reparar algunos de ellos.
6. Una vez finalizado el escaneo, reanudar tu computador.
7. Nuevamente, inicie Símbolo del sistema como administrador y ejecute los comandos dados uno tras otro:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /En línea /imagen de limpieza /startcomponentcleanup
Nota: Debe tener una conexión a Internet que funcione para ejecutar los comandos DISM correctamente.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Presione el Tecla de Windows y el tipo Administrador de dispositivos in the Windows search menu. Click on Abierto.
2. Ampliar la Los adaptadores de red sección haciendo doble clic sobre ella.
3. Haga clic derecho en su Controlador de red (por ejemplo, Intel (R) Dual Band Wireless-AC 3168) y seleccione el Deshabilitar dispositivo .
4. Confirm the below prompt by clicking on Sí.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Habilitar dispositivo .
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lea también Reparar Windows no pudo detectar automáticamente la configuración de Proxy de esta red
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Vaya al menú de búsqueda y escriba cmd. Hacer clic en Ejecutar como administrador.
2. Escriba lo siguiente comandos y pulsa el Introducir clave.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Espere a que se ejecuten los comandos y reinicia tu PC.
Método 7: vaciar la caché de DNS
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Lanzamiento Símbolo del sistema by searching in the Windows MENÚ and click on Run as administrator.
2. Escribe ipconfig / flushdns en la ventana de comandos y presione Participar.
Lea también [SOLUCIONADO] Windows detectó un problema en el disco duro
Método 8: deshabilite IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Lanza el Ejecutar cuadro de diálogo presionando Teclas Windows + R juntos.
2. Escribe ncpa.cpl y golpear Introducir clave.
3. Right-click on your active adaptador de red y haga clic en Propiedades.
4. Desmarque la Protocolo de Internet versión 6 (TCP / IPv6) .
5. Finalmente, haga clic en OK para guardar los cambios y comprobar si el problema está resuelto.
Nota: If you use multiple network connections, navigate to Centro de redes y recursos compartidos y Cambiar adaptador settings. Right-click on the adapter and select Deshabilitar. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Escribe Administrador de dispositivos in the Windows search menu and click Abierto.
2. Haga doble clic en el Los adaptadores de red para ampliarlo.
3. Haga clic derecho en su conductor (p.ej Intel (R) Dual Band Wireless-AC 3168) y haga clic Actualizar controlador.
4. Hacer clic en Buscar controladores en mi computadora para localizar e instalar un controlador manualmente.
5. Haga clic en el Navegador button to choose any directory and click on Siguiente.
5A. The drivers will be updated to the latest version if they are not updated.
5B. Si ya se encuentran en una etapa de actualización, la pantalla muestra el siguiente mensaje, Los mejores controladores para tu dispositivo ya están instalados.
6. Hacer clic en Cerrar para salir de la ventana.
7. Reanudar the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Lanzamiento Administrador de dispositivos from the Windows search menu.
2. Haga clic derecho en el conductor y seleccionar Desinstalar dispositivo.
3. Aparecerá un mensaje de advertencia en la pantalla. Revisa la caja "Eliminar el software de controlador para este dispositivo” y confirme el mensaje haciendo clic Desinstalar.
4. Descargue e instale los controladores en su dispositivo mediante una actualización manual o automática.
5. Visita el sitio web del fabricante.
2. Encuentre y Descargar los controladores correspondientes a la versión de Windows en su PC.
3. Una vez descargado, haga doble clic en el archivo descargado y siga las instrucciones proporcionadas para instalarlo.
Lea también Cómo configurar una VPN en Windows 10
Método 10: actualizar Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. presione el Windows + I claves juntos para abrir Ajustes en tu ordenador.
2. Seleccionar Actualización y seguridad.
3. Seleccionar Buscar actualizaciones.
4A. Click instalar ahora to download and install the latest update available.
4B. If your system is already up-to-date, then it will show estás al día mensaje.
Método 11: desinstalar actualizaciones recientes
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. presione y mantenga Teclas Windows + R juntos para abrir el Ejecutar caja de diálogo.
2. Escribe appwiz.cpl y golpear Participar.
3. Hacer clic en Ver actualizaciones instaladas.
4. Select the most recent update and click on Desinstalar.
5. Confirm the prompt, if any, and reiniciar la PC.
Lea también Cómo arreglar Firefox que no carga páginas
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the adaptadores de red installed in your PC along with their settings. All the stored settings are stored to default settings.
Nota: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Ajustes luego System y Nuestra Empresa. Once you have reset your network, you have to reinstall all software de red como Clientes VPN or Conmutadores virtuales.
1. presione y mantenga Windows + I teclas juntos para abrir Configuración de Windows.
2. Hacer clic en Red e Internet.
3. Hacer clic en Reinicio de red bajo Estado.
4. Confirme el mensaje haciendo clic en Restablecer ahora.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Recomendado:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Háganos saber qué método funcionó mejor para usted. Además, si tiene alguna consulta o sugerencia con respecto a este artículo, no dude en dejarla en la sección de comentarios.