Fix USB Error Code 52 Windows cannot verify the digital signature: If you have recently installed Windows Updates or upgraded Windows then it’s possible that your USB ports will not recognize any hardware that is connected to them. In fact, if you will dig further you will find out the following error message in Device Manager:
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
Error Code 52 indicates a driver failure and in device manager, you will see a yellow exclamation mark next to each USB icon. Well, there is no particular cause for this error but a number of reasons are responsible such as Corrupted Drivers, Secure boot, Integrity check, problematic filters for USB etc. So without wasting any time let’s see how to actually Fix USB Error Code 52 Windows cannot verify the digital signature with the help of below-listed troubleshooting guide.
Fix USB Error Code 52 Windows cannot verify the digital signature
Asegúrate de crear un punto de restauración en caso de que algo salga mal.
Method 1: Delete USB UpperFilter and LowerFilter Registry Entries
Nota: Backup the registry just in case something goes wrong.
1.Presione la tecla Windows + R y luego escriba regedit y presione Enter para abrir el Editor del Registro.
2.Navigate to the following the Registry Key:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{36FC9E60-C465-11CF-8056-444553540000}
3.Asegúrate de seleccionar {36FC9E60-C465-11CF-8056-444553540000} and then in the right window pane find Filtros superiores y filtros inferiores.
4.Haga clic derecho en cada uno de ellos y seleccione Eliminar.
5.Reinicie su PC para guardar los cambios.
Método 2: ejecutar Restaurar sistema
1.Presione la tecla Windows + R y escriba "sysdm.cpl”luego presione enter.
2.Select Protección del sistema pestaña y elegir Restauración del sistema.
3.Haga clic en Siguiente y elija el deseado Punto de restauración del sistema.
4.Siga las instrucciones que aparecen en pantalla para completar la restauración del sistema. Y mira si eres capaz de Fix USB Error Code 52 Windows cannot verify the digital signatureDe lo contrario, continúe con los métodos que se enumeran a continuación.
Método 3: deshabilitar el arranque seguro
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.Find the Secure Boot setting, and if possible, set it to Enabled. This option is usually in either the Security tab, the Boot tab, or the Authentication tab.
#WARNING: After disabling Secure Boot it may be difficult to re-activate Secure Boot without restoring your PC to the factory state.
3.Reinicie su PC y vea si puede Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 4: Disable Driver Signature Enforcement
For Windows 10 user’s, interpret the Windows booting process 3 times to boot into recovery mode or else you could try the following:
1.Go to the Login screen where you see the above error message then click on El botón de encendido Entonces aguanta Shift y haga clic en Reanudar (while holding the shift button).
2.Asegúrese de no soltar el botón Shift hasta que vea el Menú de opciones de recuperación avanzadas.
3.Ahora navegue hasta lo siguiente en el menú Opciones de recuperación avanzadas:
Solucionar problemas > Opciones avanzadas > Configuración de inicio > Reiniciar
4. Una vez que haga clic en Reiniciar, su PC se reiniciará y verá una pantalla azul con una lista de opciones. Asegúrese de presionar la tecla numérica al lado de la opción que dice "Desactive la aplicación de la firma del conductor."
5.Now Windows will boot again and once logged into Windows press Windows Key + R then type devmgmt.msc y presione Enter para abrir el Administrador de dispositivos.
6.Right-click on the problematic device (which has a yellow exclamation mark next to it) and select Actualizar controlador.
7.Seleccione “Busque automáticamente el software del controlador actualizado."
8.Repeat the above process for every problematic device listed in Device Manager.
9.Reinicie su PC para guardar los cambios y ver si puede Fix USB Error Code 52 Windows cannot verify the digital signature.
Method 5: Uninstall Problematic devices
1.Presione la tecla Windows + R y luego escriba devmgmt.msc y presiona Enter.
2.Haga clic derecho en each of problematic device (yellow exclamation mark next to it) and select Desinstalar.
3.Click Yes/OK to continue with uninstallation.
4.Reinicie su PC para guardar los cambios.
Method 6: Delete usb*.sys Files
1.Take Ownership of the files C:Windowssystem32driversusbehci.sys and C:Windowssystem32driversusbhub.sys through any one of the listed methods here.
2.Rename the usbehci.sys and usbhub.sys a archivos usbehciold.sys & usbhubold.sys.
3.Presione la tecla Windows + R y luego escriba devmgmt.msc y presiona Enter.
4.Expandir Controladores de bus serie universal y luego haga clic derecho en Enhanced PCI estándar de controlador de host USB y seleccionar Desinstalar.
5.Reboot your PC and new drivers will be automatically installed.
Method 7: Run CHKDSK and SFC
1.Press Windows Key + X then click on Command Prompt(Admin).
2.Ahora escribe lo siguiente en el cmd y presiona enter:
Sfc /scannow sfc /scannow /offbootdir=c: /offwindir=c:ventanas
3.Espere a que finalice el proceso anterior y, una vez terminado, reinicie su PC.
4.A continuación, ejecute CHKDSK desde aquí Solucione errores del sistema de archivos con la Utilidad Check Disk (CHKDSK).
5.Deje que se complete el proceso anterior y reinicie nuevamente su PC para guardar los cambios.
A ver si eres capaz de Fix USB Error Code 52 Windows cannot verify the digital signature, if not then follow the next method.
Method 8: Disable Integrity Checks
1.Presione la tecla Windows + X y luego seleccione Símbolo del sistema (Admin).
2.Escriba el siguiente comando en cmd y presione Enter después de cada uno:
bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
3.If the above command doesn’t work then try the following:
bcdedit / deletevalue loadoptions
bcdedit -set FIRMACIÓN DE LA PRUEBA
4.Reinicie su PC para guardar los cambios.
Recomendado para ti:
Eso es todo lo que has logrado Fix USB Error Code 52 Windows cannot verify the digital signature pero si todavía tiene alguna pregunta sobre esta guía, no dude en hacerla en la sección de comentarios.