If you are facing this error, then chances are you may have installed new hardware or software which is causing the issue. Sometimes installing the latest Windows updates seems to cause this issue but you can’t be sure until you troubleshoot the issue. Now as far as software problems are concerned, these might be the possible reasons as to
why you are facing this error:
- Corrupted BCD information
- System File is damaged.
- Loose or faulty SATA/IDE Cable
- Conflicting 3rd party software
- Virus o malware
The error which you will get after a reboot will be:
Error: Windows failed to start. A recent hardware or software change might have caused the issue after you install Windows Updates
The main problem is that you won’t boot into Windows and you will be stuck at this error message screen. In short, you will be inside a reboot loop as every time you restart your PC you will again face the same error message until you fix the issue. So without wasting any time let’s see how actually to Fix “Windows failed to start. A recent hardware or software change might be the cause” with the below-listed troubleshooting steps.
Fix Windows failed to start. A recent hardware or software change might be the cause.
Método 1: ejecutar inicio/reparación automática
1. Inserte el DVD de instalación de arranque de Windows 10 o disco de recuperación y reinicia tu PC.
2. Cuando se le solicite presionar cualquier tecla para iniciar desde un CD o DVD, pulse cualquier tecla para continuar.
3. Seleccione sus preferencias de idioma y haga clic en Siguiente. Haga clic en reparar su computadora en la parte inferior izquierda.
4. En la pantalla de elegir una opción, haga clic en Solucionar problemas
5. En la pantalla Solucionar problemas, haga clic en Opción avanzada.
6. En la pantalla Opciones avanzadas, haga clic en Reparación automática o reparación de inicio.
7. Espere hasta que se completen las reparaciones automáticas/de inicio de Windows.
8. Reinicie y tendrá éxito. Fijar Windows failed to start. A recent hardware or software change might be the cause, si no, continúa.
Lea también Cómo reparar la reparación automática no pudo reparar su PC.
Method 2: Boot into Last Known Good Configuration
Before going any further let’s discuss how to Enable Legacy Advanced Boot Menu so that you can easily get Boot Options:
1. Restart your Windows 10.
2. As the system restarts enter into BIOS setup and configure your PC to boot from CD/DVD.
3. Inserte el DVD de instalación de arranque de Windows 10 y reinicie su PC.
4. Cuando se le solicite Presione cualquier tecla para iniciar desde CD o DVD, presione cualquier tecla para continuar.
5. Selecciona tu preferencias de idioma, y haz clic en Siguiente. Haga clic en reparar su computadora en la parte inferior izquierda.
6. En la pantalla de elegir una opción, haga clic en Solucionar problemas.
7. En la pantalla Solucionar problemas, haga clic en Opción avanzada.
8. En la pantalla de opciones avanzadas, haga clic en Símbolo del sistema.
9. When the Command Prompt(CMD) open type C: y presiona enter.
10. Ahora escribe el siguiente comando:
BCDEDIT / SET {DEFAULT} BOOTMENUPOLICY LEGACY
11. And hit enter to Enable Legacy Advanced Boot Menu.
12. Close Command Prompt and back on the Choose an option screen, click Continue to restart Windows 10.
13. Finally, don’t forget to eject your Windows 10 installation DVD to get Boot options.
14. On the Boot Options screen, choose “Last Known Good Configuration (Advanced)."
Método 3: realizar una restauración del sistema
1. Coloque el medio de instalación de Windows o la Unidad de recuperación/Disco de reparación del sistema y seleccione su l.preferencias de idiomay haga clic en Siguiente
2. Hacer clic en Reparacion su computadora en la parte inferior.
3. Ahora, elija Solucionar problemas y luego Opciones avanzadas.
4. Finalmente, haga clic en “Restaurar sistema”Y siga las instrucciones en pantalla para completar la restauración.
5. Restart your PC to save changes and see if you can fix Windows failed to start. A recent hardware or software change might be the cause error.
Método 4: ejecutar SFC y CHKDSK
1. Again go to command prompt using the method 1, click on command prompt in the Advanced options screen.
2. Escriba el siguiente comando en cmd y presione Enter después de cada uno:
sfc /scannow /offbootdir=c: /offwindir=c:windows chkdsk C: /f /r /x
Note: Make sure you use the drive letter where Windows is currently installed. Also in the above command C: is the drive on which we want to check disk, /f stands for a flag which chkdsk the permission to fix any errors associated with the drive, /r let chkdsk search for bad sectors and perform recovery and /x instructs the check disk to dismount the drive before beginning the process.
3. Exit the command prompt and restart your PC.
Method 5: Rebuild BCD configuration
1. Usando el método anterior, abra el símbolo del sistema usando el disco de instalación de Windows.
2. Ahora escribe los siguientes comandos uno por uno y presiona Enter después de cada uno:
bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd
3. Si el comando anterior falla, ingrese los siguientes comandos en cmd:
bcdedit /exportar C:BCD_Backup c: cd boot attrib bcd -s -h -r ren c:bootbcd bcd.old bootrec /RebuildBcd
4. Finalmente, salga del cmd y reinicie Windows.
5. This method seems to Fix Windows failed to start. A recent hardware or software change might cause the error, but if it doesn’t work for you, then continue.
Method 6: Set Correct Boot Order
1. Cuando se inicie su computadora (antes de la pantalla de inicio o la pantalla de error), presione repetidamente Eliminar o la tecla F1 o F2 (dependiendo del fabricante de su computadora) para ingrese a la configuración del BIOS.
2. Una vez que esté en la configuración del BIOS, seleccione la pestaña Arranque de la lista de opciones.
3. Ahora asegúrese de que la computadora Disco duro o SSD se establece como máxima prioridad en el orden de inicio. De lo contrario, use las teclas de flecha hacia arriba o hacia abajo para configurar el disco duro en la parte superior, lo que significa que la computadora arrancará primero desde allí y no desde cualquier otra fuente.
4. Finalmente, presione F10 para guardar este cambio y salir.
Recomendado:
Eso es todo lo que has logrado Fix Windows failed to start. A recent hardware or software change might be the cause, but if you still have any questions regarding this post, please ask them in the comment’s section.