When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- Aegunud operatsioonisüsteem.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe ikoon.
2. If the status is set to Pole ühendatud, klõpsake nuppu Network globe icon, choose your Wi-Fi network and click on Võta meiega ühendust button. Make sure Lennuki režiim pole sisse lülitatud.
3. If you again face the same network connection error code, then click on the Katkesta button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Paremklõpsake ikooni Wi-Fi ikoon ja valige Open Network & Internet settings.
6. Kliki Wi-Fi.
7. Scroll down the right menu, click on Hallake teadaolevaid võrke.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Unusta.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
2. meetod: taaskäivitage ruuter
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Märge: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Leia Toide nupp ruuteri tagaküljel.
2. Vajutage nuppu üks kord, et Lülita see välja.
3. Nüüd, lahti oma Router power cable ja oodake, kuni toide on kondensaatoritest täielikult tühjenenud.
4. Siis ühendage the,en toitekaabel ja lülitage see minuti pärast sisse.
5. Oodake, kuni võrguühendus on taastatud ja proovige uuesti sisse logida.
Samuti loe: Fix Computers Not Showing Up on Network in Windows 10
3. meetod: käivitage võrgu tõrkeotsing
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Vajutage nuppu Windows klahv ja tüüp Seadete tõrkeotsing otsinguribal ja Ava.
2. Kliki Täiendavad tõrkeotsingud.
3. Vali Võrguadapter ja kliki Käivitage tõrkeotsing.
4. Select the network adapter to diagnose ja kliki järgmine.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem, kliki Sulgege tõrkeotsija.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Samuti loe: Perega jagamise YouTube TV ei tööta
4. meetod: parandage süsteemifailid
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Failidekontrollija) /DISM (Kujutise hooldamise ja haldamise juurutamine) utilities on your Windows 10 PC.
1. Vajutage nuppu Windows klahv, kirjuta Command Prompt ja kliki Käivita administraatorina.
2. Kliki Jah aasta Kasutajakonto kontroll kiire.
3. Tüüp chkdsk C: / f / r / x käsk ja löö Sisestage võti.
4. Kui teil palutakse saata teade, Chkdsk ei saa käivitada… köide on… kasutusel, seejärel tippige Y ja vajuta Sisestage võti.
5. Tippige uuesti käsk: sfc / scannow ja vajutage Sisestage võti käivitada Failidekontrollija skannida.
Märge: Alustatakse süsteemi skannimist ja selle lõpuleviimiseks kulub paar minutit. Samal ajal võite jätkata muude tegevustega, kuid ärge unustage akent kogemata sulgeda.
Pärast skannimise lõpetamist kuvatakse üks järgmistest teadetest:
- Windowsi ressursside kaitse ei leidnud terviklikkuse rikkumisi.
- Windowsi ressursikaitse ei saanud soovitud toimingut sooritada.
- Windows Resource Protection leidis rikutud failid ja parandas need edukalt.
- Windows Resource Protection leidis rikutud faile, kuid ei suutnud mõned neist parandada.
6. Kui skannimine on lõppenud, restart teie arvuti.
7. Käivitage uuesti Käsuviip administraatorina ja täitke üksteise järel antud käsud:
dism.exe /Onlain /cleanup-image /scanhealth dism.exe /Onlain /cleanup-image /restorehealth dism.exe /Onlain /cleanup-image /startcomponentcleanup
Märge: DISM-i käskude õigeks täitmiseks peab teil olema töötav Interneti-ühendus.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Vajutage nuppu Windows klahv ja tüüp Device Manager in the Windows search menu. Click on avatud.
2. Laiendage Võrguadapterid jaotist topeltklõpsates.
3. Paremklõpsake oma Võrgu draiver (näiteks, Intel (R) Dual Band Wireless-AC 3168) Ja valige see Keelake seade valik.
4. Confirm the below prompt by clicking on Jah.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Seadme lubamine valik.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Samuti loe: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Minge otsingumenüüsse ja tippige cmd. Klõpsake Käivita administraatorina.
2. Sisestage järgmine tekst käsud ja vajuta Sisestage võti.
netsh winsock reset netsh int ip reset ipconfig / release ipconfig / renew
3. Oodake käskude täitmist ja taaskäivitage arvuti.
7. meetod: tühjendage DNS-i vahemälu
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Käivita Command Prompt by searching in the Windows menüü and click on Run as administrator.
2. Tüüp ipconfig / flushdns in the command window and hit sisene.
Samuti loe: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Käivita jooks dialoogiboksis vajutades Windows + R-klahvid koos.
2. Tüüp käsk ncpa.cpl ja tabas Sisestage võti.
3. Right-click on your active Võrguadapter ja kliki Kinnisvara.
4. Tühjendage märkeruut Interneti-protokolli versioon 6 (TCP / IPv6) valik.
5. Lõpuks klõpsake nuppu OK to save the changes and check if the issue is resolved.
Märge: If you use multiple network connections, navigate to Network and Sharing Center ja Muutke adapterit settings. Right-click on the adapter and select Keela. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tüüp Device Manager in the Windows search menu and click avatud.
2. Topeltklõpsake ikooni Võrguadapterid selle laiendamiseks.
3. Paremklõpsake oma juht (nt Intel® Dual Band Wireless-AC 3168) ja klõpsake nuppu Värskenda draiverit.
4. Kliki Sirvige minu arvutit draiverite leidmiseks to locate and install a driver manually.
5. Klõpsake nupul brauseri button to choose any directory and click on järgmine.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Teie seadme parimad draiverid on juba installitud.
6. Kliki lähedal aknast väljumiseks.
7. Restart the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Käivita Device Manager from the Windows search menu.
2. Paremklõpsake ikooni juht ja valige Seadme desinstallimine.
3. A warning prompt will be displayed on the screen. Check the box “Selle draiveri tarkvara kustutamine selle seadme jaoks” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Külastage tootja veebileht.
2. leidma ja Lae teie arvutis olevale Windowsi versioonile vastavad draiverid.
3. Once downloaded, double click on the allalaaditud fail and follow the given instructions to install it.
Samuti loe: How to set up a VPN on Windows 10
10. meetod: värskendage Windowsi
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. Vajutage nuppu Windows + I võtmed koos avada Seaded oma arvutis.
2. Vali Värskendamine ja turvalisus.
3. Vali Kontrolli värskendusi.
4A. Click Installi kohe uusima saadaoleva värskenduse allalaadimiseks ja installimiseks.
4B. Kui teie süsteem on juba ajakohane, kuvatakse see Oled kursis sõnum
11. meetod: desinstallige hiljutised värskendused
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Vajutage ja hoidke all Windows + R-klahvid koos, et avada jooks Dialoogikast.
2. Tüüp appwiz.cpl ja tabas sisene.
3. Kliki Kuva installitud värskendused.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and taaskäivitage arvuti.
Samuti loe: Kuidas parandada Firefoxi mittelaadimise lehti
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the Võrguadapterid installed in your PC along with their settings. All the stored settings are stored to default settings.
Märge: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Seaded SIIS süsteem ja MEIST. Once you have reset your network, you have to reinstall all networking software nagu VPN-i kliendid or Virtuaalsed lülitid.
1. Vajutage ja hoidke all Klahvid Windows + I koos avada Windows Settings.
2. Kliki Võrk ja Internet.
3. Kliki Võrgu lähtestamine all olek.
4. Kinnitage viip, klõpsates nuppu Lähtesta nüüd.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Soovitan:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Andke meile teada, milline meetod teie jaoks kõige paremini toimis. Samuti, kui teil on selle artikli kohta küsimusi/soovitusi, jätke need kommentaaride sektsiooni.