Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Taaskäivitage ja valige õige alglaadimisseadme probleem [LAHENDATUD]
Method 1: Set Correct Boot Order
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Kui arvuti käivitub (enne algkäivituskuva või veakuva), vajutage korduvalt klahvi Delete või F1 või F2 (olenevalt teie arvuti tootjast), et sisenege BIOS-i seadistusse.
2. Kui olete BIOS-i seadistuses, valige valikute loendist vahekaart Boot.
3. Nüüd veenduge, et arvuti Kõvaketas või SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue, kui ei, siis jätka.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diagnostika käivitamiseks taaskäivitage arvuti ja arvuti käivitumisel (enne algkäivituskuva) vajutage klahvi F12 ja kui ilmub alglaadimismenüü, tõstke esile suvand Boot to Utility Partition või Diagnostics ja vajutage diagnostika käivitamiseks sisestusklahvi. See kontrollib automaatselt kogu teie süsteemi riistvara ja annab teada, kui leitakse mõni probleem.
Soovitan: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
NB! It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Sisestage Windows 10 käivitatav installi-DVD ja taaskäivitage arvuti.
2. Kui teil palutakse CD-lt või DVD-lt käivitamiseks vajutada mis tahes klahvi, vajutage jätkamiseks mis tahes klahvi.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Taaskäivitage ja olete edukalt Fix Reboot and Select Proper Boot Device issue, if not, continue.
Lugege ka jaotist Kuidas parandada Automaatne parandamine ei suutnud teie arvutit parandada.
5. meetod: lubage UEFI alglaadimine
1. Taaskäivitage arvuti ja puudutage F2 või DEL, olenevalt arvutist, et avada Boot Setup.
2.The make the following changes:
Muutke alglaadimisloendi suvandiks UEFI Keela Laadi pärand suvand ROM Luba turvaline alglaadimine
3. Järgmisena puudutage salvestamiseks ja alglaadimise seadistusest väljumiseks klahvi F10.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Märge: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
7. meetod: installige Windows 10
Kui ükski ülaltoodud lahendustest teie jaoks ei tööta, võite olla kindel, et teie HDD on korras, kuid võite näha tõrget "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key” kuna operatsioonisüsteem või HDD-l olev BCD-teave on kuidagi kustutatud. Sel juhul võite proovida Windowsi installimist parandada, kuid kui ka see ebaõnnestub, on ainus lahendus installida Windowsi uus koopia (puhas installimine).
See on teil edukalt Määrama Reboot and Select proper Boot device issue kuid kui teil on selle postituse kohta endiselt küsimusi, küsige neid kommentaaride jaotises.