When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus or malware attack.
- سیستم عامل قدیمی
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe آیکون.
2. If the status is set to متصل نیست، کلیک کنید روی Network globe icon, choose your Wi-Fi network and click on اتصال button. Make sure حالت هواپیما روشن نیست
3. If you again face the same network connection error code, then click on the قطع شدن button, wait for some time and reconnect it again.
4. Try connecting to a different از Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. بر روی کلیک راست کنید نماد Wi-Fi را انتخاب کنید و Open Network & Internet settings.
6. با کلیک بر روی از Wi-Fi.
7. Scroll down the right menu, click on مدیریت شبکه های معروف.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select فراموش کردن.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
روش 2: راه اندازی مجدد روتر
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
توجه داشته باشید: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. پیدا کردن دکمه قدرت در پشت روتر شما
2. دکمه را یکبار فشار دهید تا خاموشش کن.
3. اکنون ، جدا کردن خود را Router power cable و صبر کنید تا برق به طور کامل از خازن ها تخلیه شود.
4. سپس ، دوباره به هم متصل la کابل برق و بعد از یک دقیقه آن را روشن کنید.
5. صبر کنید تا اتصال شبکه دوباره برقرار شود و دوباره وارد سیستم شوید.
همچنین خواندن: رفع عدم نمایش کامپیوترها در شبکه در ویندوز 10
روش 3: عیب یابی شبکه را اجرا کنید
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. ضربه بزنید کلید ویندوز و نوع تنظیمات عیب یابی در نوار جستجو و را باز کنید.
2. با کلیک بر روی عیب یابی های اضافی.
3 انتخاب کنید آداپتور شبکه و کلیک بر روی مشکلی را اجرا کنید.
4. Select the network adapter to diagnose و کلیک بر روی بعدی.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Troubleshooting couldn’t identify the problem، روی کلیک کنید عیب یابی را ببندید.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
همچنین خواندن: رفع عدم کارکرد اشتراکگذاری خانوادگی YouTube TV
روش 4: فایل های سیستم را تعمیر کنید
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (بررسی فایل سیستم) /DISM (نصب و راه اندازی تصویر خدمات و مدیریت) utilities on your Windows 10 PC.
1. ضربه بزنید کلید ویندوزنوع خط فرمان و کلیک بر روی اجرا به عنوان مدیر.
2. با کلیک بر روی بله در کنترل حساب کاربر سریع.
3. نوع chkdsk C: / f / r / x دستور دهید و ضربه بزنید کلید ورود.
4. اگر پیامی از شما خواسته شد، Chkdsk نمی تواند اجرا شود... حجم در حال استفاده است، سپس تایپ کنید Y و ضربه کلید ورود.
5. دوباره دستور را تایپ کنید: sfc / scannow و مطبوعات کلید ورود برای اجرا بررسی فایل سیستم اسکن کردن
توجه داشته باشید: یک اسکن سیستم آغاز می شود و چند دقیقه طول می کشد تا تمام شود. در همین حال، میتوانید به انجام فعالیتهای دیگر ادامه دهید، اما مراقب باشید که پنجره را بهطور تصادفی نبندید.
پس از تکمیل اسکن، یکی از این پیام ها را نشان می دهد:
- Windows Resource Protection هیچگونه نقض یکپارچگی پیدا نکرد.
- Windows Resource Protection نتوانست عملیات درخواستی را انجام دهد.
- Windows Resource Protection فایل های خراب را پیدا کرد و با موفقیت آنها را تعمیر کرد.
- حفاظت از منابع ویندوز فایل های فاسد را شناسایی کرد اما نتوانست برخی از آنها را تعمیر کند.
6. هنگامی که اسکن به پایان رسید، شروع دوباره کامپیوتر شما.
7. دوباره راه اندازی کنید Command Prompt به عنوان مدیر و دستورات داده شده را یکی پس از دیگری اجرا کنید:
dism.exe /آنلاین /cleanup-image /scanhealth dism.exe /آنلاین /cleanup-image /restorehealth dism.exe /آنلاین /cleanup-image /startcomponentcleanup
توجه داشته باشید: برای اجرای صحیح دستورات DISM باید یک اتصال اینترنتی فعال داشته باشید.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. ضربه بزنید کلید ویندوز و نوع مدیریت دستگاه in the Windows search menu. Click on باز کن.
2. گسترش دهید آداپتورهای شبکه بخش با دوبار کلیک کردن بر روی آن.
3. بر روی خود راست کلیک کنید درایور شبکه (مثلا، Intel (R) Dual Band Wireless-AC 3168) و انتخاب کنید غیرفعال کردن دستگاه گزینه.
4. Confirm the below prompt by clicking on بله.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the دستگاه را فعال کنید گزینه.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
همچنین خواندن: رفع مشکل ویندوز نمی تواند به طور خودکار تنظیمات پراکسی این شبکه را شناسایی کند
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Go to the search menu and type CMDاست. با کلیک بر روی اجرا به عنوان مدیر.
2. عبارت زیر را تایپ کنید دستورات و ضربه کلید ورود.
تنظیم netsh winsock netsh int ip reset ipconfig / release ipconfig / تمدید
3. منتظر بمانید تا دستورات اجرا شوند و رایانه خود را مجدداً راه اندازی کنید.
روش 7: کش DNS را شستشو دهید
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1 راه اندازی خط فرمان by searching in the ویندوز منو and click on Run as administrator.
2. نوع ipconfig / flushdns in the command window and hit وارد.
همچنین خواندن: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1 راه اندازی دویدن کادر محاوره ای با فشار دادن کلیدهای Windows + R با هم.
2. نوع ncpa.cpl و ضربه کلید ورود.
3. Right-click on your active آداپتور شبکه و کلیک بر روی پروژه های ما.
4. علامت را بردارید پروتکل اینترنت نسخه 6 (TCP / IPv6) گزینه.
5. در نهایت بر روی آن کلیک کنید OK to save the changes and check if the issue is resolved.
توجه داشته باشید: If you use multiple network connections, navigate to شبکه و به اشتراک گذاری مرکز و آداپتور را تغییر دهید settings. Right-click on the adapter and select از کار انداختن. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. نوع مدیریت دستگاه in the Windows search menu and click باز کن.
2. Double click on the آداپتورهای شبکه برای گسترش آن.
3. بر روی خود راست کلیک کنید راننده (به عنوان مثال Intel (R) Dual Band Wireless-AC 3168) و کلیک کنید به روزرسانی راننده.
4. با کلیک بر روی کامپیوتر من را برای درایورها مرور کنید to locate and install a driver manually.
5. در را کلیک کنید مرورگر button to choose any directory and click on بعدی.
5A. The drivers will be updated to the latest version if they are not updated.
5B. اگر قبلاً در مرحله به روز رسانی هستند، صفحه پیام زیر را نشان می دهد: بهترین درایورها برای دستگاه شما از قبل نصب شده اند.
6. با کلیک بر روی نزدیک برای خروج از پنجره
7. راه اندازی مجدد the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1 راه اندازی مدیریت دستگاه from the Windows search menu.
2. بر روی کلیک راست کنید راننده را انتخاب کنید و دستگاه را حذف کنید.
3. A warning prompt will be displayed on the screen. Check the box “نرم افزار راننده را برای این دستگاه حذف کنید” and confirm the prompt by clicking عزل.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. بازدید از وب سایت سازنده.
2. پیدا کردن و دانلود the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the فایل دانلود شده و دستورالعمل های داده شده را برای نصب آن دنبال کنید.
همچنین خواندن: نحوه راه اندازی VPN در ویندوز 10
روش 10: ویندوز را به روز کنید
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1 مطبوعات ویندوز + من کلید با هم برای باز کردن تنظیمات در کامپیوتر شما.
2 انتخاب کنید به روز رسانی و امنیت.
3 انتخاب کنید بررسی به روز رسانی.
4A. Click نصب در حال حاضر to download and install the latest update available.
4B. If your system is already up-to-date, then it will show شما به روز هستید پیام
روش 11: به روز رسانی های اخیر را حذف نصب کنید
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. فشار دهید و نگه دارید کلیدهای Windows + R با هم برای باز کردن دویدن کادر محاوره ای.
2. نوع appwiz.cpl و ضربه وارد.
3. با کلیک بر روی مشخصات نصب به روز رسانی.
4. Select the most recent update and click on عزل.
5. Confirm the prompt, if any, and کامپیوتر را ریبوت کنید.
همچنین خواندن: نحوه رفع لود نشدن صفحات فایرفاکس
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the network adapters installed in your PC along with their settings. All the stored settings are stored to default settings.
توجه داشته باشید: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to تنظیمات سپس سیستم و درباره ما. Once you have reset your network, you have to reinstall all networking software پسندیدن مشتریان VPN or سوئیچ های مجازی.
1. فشار دهید و نگه دارید کلیدهای Windows + I با هم برای باز کردن تنظیمات ویندوز.
2. با کلیک بر روی شبکه و اینترنت.
3. با کلیک بر روی تنظیم مجدد شبکه زیر وضعیت.
4. درخواست را با کلیک بر روی آن تایید کنید اکنون تنظیم مجدد.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
توصیه می شود:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.