Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Reboot and Select proper Boot device
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
راه اندازی مجدد و انتخاب مشکل دستگاه بوت مناسب [حل شد]
روش 1: ترتیب درست بوت را تنظیم کنید
You may be seeing the error “Reboot and Select proper Boot device” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. هنگامی که رایانه شما شروع به کار می کند (قبل از بوت شدن صفحه یا صفحه خطا)، چندین بار کلید Delete یا F1 یا F2 (بسته به سازنده رایانه شما) را فشار دهید تا وارد تنظیمات بایوس شوید.
2. هنگامی که در تنظیمات BIOS هستید، تب Boot را از لیست گزینه ها انتخاب کنید.
3.حالا مطمئن شوید که کامپیوتر هارد دیسک یا SSD is set as a top priority in the Boot order. If not then use up or down arrow keys to set hard disk at the top which means the computer will first boot from it rather than any other source.
4.Finally, press F10 to save this change and exit. This must have Fix Reboot and Select Proper Boot Device Issue، اگر نه پس ادامه دهید.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
برای اجرای Diagnostics رایانه شخصی خود را مجدداً راه اندازی کنید و با شروع به کار رایانه (قبل از صفحه بوت)، کلید F12 را فشار دهید و هنگامی که منوی Boot ظاهر شد، گزینه Boot to Utility Partition یا گزینه Diagnostics را هایلایت کرده و enter را فشار دهید تا Diagnostics شروع شود. این به طور خودکار تمام سخت افزار سیستم شما را بررسی می کند و در صورت مشاهده هر گونه مشکلی را گزارش می دهد.
توصیه می شود: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
مهم: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. DVD نصب قابل بوت ویندوز 10 را وارد کرده و کامپیوتر خود را مجددا راه اندازی کنید.
2. هنگامی که از شما خواسته شد برای بوت شدن از CD یا DVD هر کلیدی را فشار دهید، برای ادامه هر کلید را فشار دهید.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. راه اندازی مجدد و شما با موفقیت Fix Reboot and Select Proper Boot Device issue، اگر نه، ادامه دهید.
همچنین بخوانید: چگونه تعمیر خودکار را تعمیر کرد که کامپیوتر شما را تعمیر نکرد.
روش 5: UEFI Boot را فعال کنید
1. رایانه خود را مجدداً راه اندازی کنید و بسته به رایانه خود روی F2 یا DEL ضربه بزنید تا Boot Setup باز شود.
2.The make the following changes:
گزینه Boot list را به UEFI Disable Load Legacy گزینه ROM Enable Secure boot تغییر دهید
3-بعد، روی F10 ضربه بزنید تا ذخیره شود و از تنظیمات بوت خارج شوید.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
توجه داشته باشید: Always mark the System Reserved Partition (generally 100mb) active and if you don’t have a System Reserved Partition then mark C: Drive as the active partition.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
روش 7: تعمیر ویندوز 10 را نصب کنید
اگر هیچ یک از راه حل های بالا برای شما کار نکرد، می توانید مطمئن باشید که هارد دیسک شما خوب است اما ممکن است خطا را مشاهده کنید.Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a keyزیرا اطلاعات سیستم عامل یا BCD روی HDD به نحوی پاک شده است. خوب، در این مورد، می توانید سعی کنید ویندوز را تعمیر کنید، اما اگر این کار نیز انجام نشد، تنها راه حل باقی مانده نصب یک نسخه جدید از ویندوز (Clean Install) است.
این چیزی است که شما با موفقیت انجام داده اید رفع Reboot and Select proper Boot device issue but if you still have any queries regarding this post feel free to ask them in the comment’s section.