When you face any network inconsistencies in your Windows 10 PC, you will receive a 0x00028002 error code. You cannot go back to work unless you reboot your computer. The error code 0x00028002 prevents your PC from connecting to a local network. If you are struggling with network connection problems, you can try running the Windows Network Diagnostics tool. If the result of the troubleshooting tool is 0x00028002 error code, then this article will help you a lot. In this article, we have shown how to fix network connection error 0x00028002 in Windows 10.
How to Fix Network Connection Error 0x00028002 in Windows 10
The primary reason for the network error is outdated drivers and a glitch in the internet connection. Some other reasons that cause 0x00028002 are as follow:
- Incompatible router configurations and physical failure of the router.
- Glitch in the Wi-Fi network.
- Outdated or corrupt network adapters.
- IPv6 is enabled in devices that do not support those configurations.
- Corrupt system files in PC.
- Malfunction in PC operation.
- Leftover registry components in PC due to incomplete installation/uninstallation of software.
- Virus- tai haittaohjelmahyökkäys.
- Vanhentunut käyttöjärjestelmä.
- Issue with the Network Controller.
When your PC encounters any one or all of these reasons, you will face network connection error 0x00028002. In this case, you cannot connect to Wi-Fi correctly. Don’t worry. We are here to help you with amazing workarounds to resolve the same.
In this section, we have compiled a list of methods that will help you resolve the network connection error code with both basic and advanced troubleshooting methods. Follow them in the same order to attain perfect results.
Method 1: Reconnect Wi-Fi
Follow these basic troubleshooting steps to reconnect to your network.
1. Ensure your PC is connected to the network. Hover over the Network globe kuvaketta.
2. If the status is set to Ei yhteyttä, Klikkaa Network globe icon, choose your Wi-Fi network and click on kytkeä button. Make sure Lentokonetila ei ole päällä.
3. If you again face the same network connection error code, then click on the Katkaista button, wait for some time and reconnect it again.
4. Try connecting to a different Wi-Fi network and check if you face 0x00028002 error code again.
Still, if you face the same problem then try to forget the network and connect again.
5. Napsauta hiiren kakkospainikkeella Wi-Fi-kuvake ja valitse Open Network & Internet settings.
6. Valitse Wi-Fi.
7. Scroll down the right menu, click on Hallinnoi tunnettuja verkkoja.
8. A list of wireless networks you successfully paired up earlier will be displayed on the screen. Click on any wireless network (that seems unnecessary) and select Unohtaa.
9. Connect to the network again. If the same problem repeats, move ahead to the next method.
Tapa 2: Käynnistä reititin uudelleen
Many users have reported that the network connection error code arises due to problems in the router. If you diagnose a major hardware failure, then you have to replace your router, but don’t worry this does not happen often. You can resolve temporary glitches in your router with a simple restart. Here are a few simple steps to restart the router to fix network connection error 0x00028002.
Huomautus: If you are using a cable modem/ Wi-Fi router combo device, follow the steps only for a single device.
1. Etsi virtapainike at the back of your router.
2. Press the button once to laita se pois päältä.
3. Nyt katkaista omaa Router power cable ja odota, kunnes virta on tyhjentynyt kokonaan kondensaattoreista.
4. Sitten, reconnect Ishayoiden opettaman virtajohto ja kytke se päälle minuutin kuluttua.
5. Wait until the network connection is re-established and try signing in again.
Lue myös: Fix Computers Not Showing Up on Network in Windows 10
Tapa 3: Suorita verkon vianmääritys
Network troubleshooter helps you diagnose and resolve problems within the computer network. All the problems related to network operations will be analyzed by the troubleshooter and the issues will be displayed on the screen. This method eliminates the potential symptoms of the network connection error and prevents it from occurring again. Here are a few instructions to run Network Troubleshooter.
1. Paina Windows-näppäin ja tyyppi Asetusten vianetsintä hakupalkissa ja Avata.
2. Valitse Lisävianmääritykset.
3. valita Network Adapter ja klikkaa Suorita vianmääritys.
4. Select the network adapter to diagnose ja klikkaa seuraava.
6. Wait for the troubleshooter to detect the problems.
7A. If the result is Vianetsintä ei pystynyt tunnistamaan ongelmaa, Klikkaa Sulje vianetsintä.
7B. If the troubleshooter has identified a problem, then follow the on-screen instructions to fix the 0x00028002 error code.
Lue myös: Fix Family Sharing YouTube TV Not Working
Tapa 4: Korjaa järjestelmätiedostot
If you have any corrupt system files or configuration files on your PC, you will receive this error code. These files lead to the malfunction of the Operating System and so, you cannot connect to any wireless network again. Here are a few instructions to run SFC (Järjestelmätiedostojen tarkistuksen) /DISM (Käyttöönotto ja ylläpito) utilities on your Windows 10 PC.
1. Paina Windows-näppäin, tyyppi Komentorivi ja klikkaa Suorita järjestelmänvalvojana.
2. Valitse Kyllä vuonna User Account Control nopeaa.
3. Tyyppi chkdsk C: / f / r / x komento ja lyö Enter-näppäin.
4. Jos sinua kehotetaan lähettämään viesti, Chkdsk ei voi toimia...taltio on... käytössä, sitten kirjoita Y ja osuma Enter-näppäin.
5. Kirjoita uudelleen komento: sfc / scannow ja paina Enter-näppäin suorittaa Järjestelmätiedostojen tarkistuksen skannata.
Huomautus: Järjestelmän tarkistus käynnistetään, ja sen suorittaminen kestää muutaman minuutin. Sillä välin voit jatkaa muiden toimien suorittamista, mutta muista, ettet sulje ikkunaa vahingossa.
Kun skannaus on suoritettu, se näyttää jommankumman seuraavista viesteistä:
- Windows Resource Protection ei löytänyt eheysrikkomuksia.
- Windows Resource Protection ei voinut suorittaa pyydettyä toimintoa.
- Windows Resource Protection löysi korruptoituneet tiedostot ja korjasi ne onnistuneesti.
- Windows Resource Protection löysi korruptoituneet tiedostot, mutta ei pystynyt korjaamaan joitain niistä.
6. Kun skannaus on valmis, uudelleenkäynnistys tietokoneesi.
7. Käynnistä uudelleen Komentokehote järjestelmänvalvojana ja suorita annetut komennot peräkkäin:
dism.exe /Online /cleanup-image /scanhealth dism.exe /Online /cleanup-image /restorehealth dism.exe /Online /cleanup-image /startcomponentcleanup
Huomautus: Sinulla on oltava toimiva Internet-yhteys, jotta voit suorittaa DISM-komentoja oikein.
3. Finally, wait for the process to run successfully and close the window and check if the error code 0x00028002 is fixed.
Method 5: Re-enable Network Adapter
Sometimes, a small temporary glitch in your network adapters can cause error code 0x00028002. To resolve it completely, you can tweak Network Adapter settings. Follow the below-listed instructions to disable the Network Adapter and re-enable it later.
1. Paina Windows-näppäin ja tyyppi Laitehallinta in the Windows search menu. Click on avoin.
2. Laajenna Verkkosovittimet -osio kaksoisnapsauttamalla sitä.
3. Napsauta hiiren kakkospainikkeella omaa Verkko-ohjain (esimerkiksi, Intel (R) Dual Band Wireless-AC 3168) Ja valitse Poista laite käytöstä vaihtoehto.
4. Confirm the below prompt by clicking on Kyllä.
5. Now, the screen refreshes. Wait a while or reboot your computer. Again, Right-click on your driver and select the Ota laite käyttöön vaihtoehto.
6. Finally, check if you have fixed Your connection was interrupted error in Windows 10 PC.
Lue myös: Fix Windows could not automatically detect this Network’s Proxy settings
Method 6: Reset ipconfig
A network change was detected error indicates a change in IP address. Few users have reported that you could fix your connection was interrupted Windows 10 when they reset the TCP/IP configuration. Follow & implement the below-instructed steps.
1. Siirry hakuvalikkoon ja kirjoita cmd. Valitse Suorita järjestelmänvalvojana.
2. Kirjoita seuraava komennot ja osuma Enter-näppäin.
netsh winsock nollaus netsh int ip reset ipconfig / release ipconfig / renew
3. Odota, että komennot suoritetaan ja käynnistä tietokone uudelleen.
Tapa 7: Tyhjennä DNS-välimuisti
DNS cache stores the DNS records in your Windows 10 PC so that you could use them in the future. This eliminates the need for any new DNS queries thereby improving the network performance. These DNS caches are not only stored in your computer but also your company and ISP as well. Flushing DNS cache is done to remove any glitches associated with the network and here is how to do that.
1. Tuoda markkinoille Komentorivi by searching in the Windows menu and click on Run as administrator.
2. Tyyppi ipconfig / flushdns komentoikkunassa ja paina enter.
Lue myös: [SOLVED] Windows detected a hard disk problem
Method 8: Disable IPv6
If you face error code 0x00028002 in your Windows 10 computer, this might be due to the fact that IPv6 is enabled in a device that does not support it. You can fix the error by disabling IPv6 as instructed below.
1. Käynnistä ajaa valintaikkuna painamalla Windows + R-näppäimet yhteen.
2. Tyyppi ncpa.cpl ja osuma Enter-näppäin.
3. Right-click on your active verkkosovitin ja klikkaa Kiinteistöt.
4. Poista valinta Internet-protokollan versio 6 (TCP / IPv6) vaihtoehto.
5. Napsauta lopuksi OK to save the changes and check if the issue is resolved.
Huomautus: If you use multiple network connections, navigate to Verkko- ja jakamiskeskus ja Vaihda sovitin settings. Right-click on the adapter and select Poista. Likewise, disable all the additional connections except the one you are using and check if the issue is resolved.
Method 9: Update or Reinstall Network Drivers
If the network drivers are outdated or incompatible with your Windows 10 PC, try updating them to fix the 0x00028002 error code. If updating drivers does not give you a fix, then reinstall them if necessary.
Option I: Update Drivers
1. Tyyppi Laitehallinta in the Windows search menu and click avoin.
2. Kaksoisnapsauta -kuvaketta Verkkosovittimet laajentaa sitä.
3. Napsauta hiiren kakkospainikkeella omaa kuljettaja (esim Intel (R) Dual Band Wireless-AC 3168) ja napsauta Päivitä ohjain.
4. Valitse Selaa tietokoneeni ohjaimia to locate and install a driver manually.
5. Klikkaa selain button to choose any directory and click on seuraava.
5A. The drivers will be updated to the latest version if they are not updated.
5B. If they are already in an updated stage, the screen displays the following message, Laitteesi parhaat ohjaimet on jo asennettu.
6. Valitse lähellä poistuaksesi ikkunasta.
7. Käynnistä uudelleen the computer, and check if you have fixed the error.
Option II: Reinstall Driver
1. Tuoda markkinoille Laitehallinta from the Windows search menu.
2. Napsauta hiiren kakkospainikkeella kuljettaja ja valitse Poista laite.
3. A warning prompt will be displayed on the screen. Check the box “Poista tämän laitteen ohjainohjelmisto” and confirm the prompt by clicking Uninstall.
4. Download and install the drivers on your device either by a manual update or automatic update.
5. Käy valmistajan verkkosivuilla.
2. Löytää ja Lataa the drivers corresponding to the Windows version on your PC.
3. Once downloaded, double click on the ladattu tiedosto and follow the given instructions to install it.
Lue myös: How to set up a VPN on Windows 10
Tapa 10: Päivitä Windows
If you have an outdated Operating System, your PC may face so many conflicts rather than 0x00028002 error code. Follow the below-mentioned steps to update Windows OS.
1. paina Windows + I avaimet yhdessä avataksesi Asetukset tietokoneellesi.
2. valita Päivitys ja suojaus.
3. valita Tarkista päivitykset.
4A. Click Asenna nyt ladataksesi ja asentaaksesi uusimman saatavilla olevan päivityksen.
4B. Jos järjestelmäsi on jo ajan tasalla, se näkyy Olet ajan tasalla viesti.
Tapa 11: Poista viimeisimmät päivitykset
If you face the error code 0x00028002 after upgrading your Operating System, then uninstall the recent update by following the below-mentioned instructions.
1. Pidä -näppäintä alhaalla Windows + R-näppäimet yhdessä avataksesi ajaa valintaikkuna.
2. Tyyppi appwiz.cpl ja osuma enter.
3. Valitse Näytä asennetut päivitykset.
4. Select the most recent update and click on Uninstall.
5. Confirm the prompt, if any, and käynnistä PC uudelleen.
Lue myös: Kuinka korjata Firefox ei lataa sivuja
Method 12: Perform Network Reset
If you did not attain any fix to network connection error 0x00028002 by implementing all other methods discussed here, then perform a network reset. This removes all the Verkkosovittimet installed in your PC along with their settings. All the stored settings are stored to default settings.
Huomautus: To perform a Network reset, make sure your PC runs in Windows 10 version 1607 or later. To check your version, follow this path. Go to Asetukset sitten järjestelmä ja Meistä. Once you have reset your network, you have to reinstall all verkkoohjelmisto pitää VPN -asiakkaat or Virtuaaliset kytkimet.
1. Pidä -näppäintä alhaalla Windows + I -näppäimet yhdessä avataksesi Windows-asetukset.
2. Valitse Verkko ja Internet.
3. Valitse Verkon nollaus varten Tila.
4. Vahvista kehote napsauttamalla Nollaa nyt.
6. Now, your PC restarts. Ultimately, error code 0x00028002 will be fixed now.
Still, if you face the error again, perform a system restore of your Windows 10 PC and if you assume any hardware failure, replace your router if necessary.
Suositus:
We hope that this guide was helpful and you could fix Windows 10 network connection error 0x00028002. Let us know which method worked for you the best. Also, if you have any queries/suggestions regarding this article, then feel free to drop them in the comments section.