Reboot and Select Proper Boot Device Issue [SOLVED]: This error is caused because of corrupted system files, incorrect boot order or hard disk failure. These are just some common causes due to which this error is caused in Windows. This error comes up when you boot your Windows and even if you restart your computer you won’t be able to boot as you will be faced with a black screen with error message:
Käynnistä uudelleen ja valitse oikea käynnistyslaite
Or Insert Boot Media in Selected Boot device and press a key
In some cases even replacing the faulty hard disk doesn’t seem to fix the problem but don’t worry here at troubleshooter, we have listed few possible solutions which will help you troubleshoot this issue easily.
Käynnistä uudelleen ja valitse oikea käynnistyslaiteongelma [RATKAISTU]
Method 1: Set Correct Boot Order
Saatat nähdä virheilmoituksen "Käynnistä uudelleen ja valitse oikea käynnistyslaite” because the boot order is not properly set which means that computer is trying to boot from another source which doesn’t have an operating system thus failing to do so. In order to fix this issue, you need to set the Hard Disk as the top priority in the Boot order. Let’s see how to set proper boot order:
1. Kun tietokone käynnistyy (ennen käynnistysnäyttöä tai virhenäyttöä), paina toistuvasti Delete- tai F1- tai F2-näppäintä (tietokoneesi valmistajan mukaan) mene BIOS-asetuksiin.
2. Kun olet BIOS-asetuksissa, valitse Boot-välilehti vaihtoehtojen luettelosta.
3. Varmista nyt, että tietokone Kiintolevy tai SSD on asetettu ensisijaiseksi prioriteetiksi käynnistysjärjestyksessä. Jos ei, aseta kiintolevy ylä- tai alanuolinäppäimillä, mikä tarkoittaa, että tietokone käynnistyy ensin siltä eikä mistään muusta lähteestä.
4. Paina lopuksi F10 tallentaaksesi tämän muutoksen ja poistuaksesi. Tämän täytyy olla Fix Reboot and Select Proper Boot Device Issue, jos ei niin jatka.
Method 2: Check if the Hard Disk is damaged/failed
If the above method weren’t helpful at all then there is a chance that your hard disk might be damaged or corrupted. In any case, you need to replace your previous HDD or SSD with a new one and install Windows again. But before running to any conclusion, you must run a Diagnostic tool to check if you really need to replace HDD/SSD.
Diagnostiikan suorittamiseksi käynnistä tietokone uudelleen ja kun tietokone käynnistyy (ennen käynnistysnäyttöä), paina F12-näppäintä ja kun Boot-valikko tulee näkyviin, korosta Boot to Utility Partition -vaihtoehto tai Diagnostics-vaihtoehto ja paina Enter-näppäintä aloittaaksesi diagnostiikka. Tämä tarkistaa automaattisesti kaikki järjestelmäsi laitteistot ja raportoi, jos ongelmia löytyy.
Suositus: Fix Bad Sector issues with HDD using Hiren’s Boot
Method 3: Check if Hard Disk is properly connected
In 50% of the cases, this problem is caused because of the faulty or loose connection of hard disk and to make sure that this is not the case here you need to check your PC for any type of fault in the connection.
Tärkeää: It is not recommended to open the casing of your PC if it’s under warranty as it will void your warranty, a better approach, in this case, will be taking your PC in the service center. Also, if you don’t have any technical knowledge then don’t mess with the PC and make sure to look for an expert technician which can help you in checking for faulty or loose connection of hard disk.
Once you have checked the proper connection of hard disk is established, reboot your PC and this time you may be able to Fix Reboot and Select Proper Boot Device Issue.
Method 4: Run startup/Automatic Repair
1. Aseta Windows 10:n käynnistysasennus-DVD asemaan ja käynnistä tietokone uudelleen.
2. Kun sinua pyydetään käynnistämään CD- tai DVD-levyltä painamalla mitä tahansa näppäintä, jatka painamalla mitä tahansa näppäintä.
3.Select your language preferences, and click Next. Click Repair your computer in the bottom-left.
4.On choose an option screen, click Troubleshoot.
5.On Troubleshoot screen, click Advanced option.
6.On the Advanced options screen, click Automatic Repair or Startup Repair.
7.Wait til the Windows Automatic/Startup Repairs complete.
8. Käynnistä uudelleen ja olet onnistunut Fix Reboot and Select Proper Boot Device issue, if not, continue.
Lue myös Kuinka korjata Automaattinen korjaus ei voinut korjata tietokonettasi.
Tapa 5: Ota UEFI-käynnistys käyttöön
1.Restart your PC and tap F2 or DEL depending upon your PC to open Boot Setup.
2.The make the following changes:
Muuta Boot list -asetukseksi UEFI Disable Load Legacy -vaihtoehto ROM Ota suojattu käynnistys käyttöön
3. Napauta seuraavaksi F10 tallentaaksesi ja poistuaksesi käynnistysasetuksista.
Method 6: Change the Active Partition in Windows
1.Again open cmd using Windows installation disk.
2.Type the following command into cmd and hit enter after each one:
Huomautus: Merkitse aina System Reserved Partition (yleensä 100 Mt) aktiiviseksi ja jos sinulla ei ole System Reserved Partitionia, merkitse C: Drive aktiiviseksi osioksi.
DiskPart list disk select disk 0 list partition select partition 1 active exit
3.Close the command prompt and restart your PC. In many cases, this method was able to Fix Reboot and Select Proper Boot Device issue.
Also, see How to fix BOOTMGR is missing Windows 10
Tapa 7: Korjaa Asenna Windows 10
Jos mikään yllä olevista ratkaisuista ei toimi sinulle, voit olla varma, että kiintolevysi on kunnossa, mutta saatat nähdä virheilmoituksen "Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key", koska käyttöjärjestelmä tai kiintolevyn BCD-tiedot on jotenkin pyyhitty pois. No, tässä tapauksessa voit yrittää korjata Windowsin asennusta, mutta jos tämäkään epäonnistuu, ainoa jäljellä oleva ratkaisu on asentaa uusi Windows-kopio (Puhdas asennus).
Siinä se onnistuu Korjata Reboot and Select proper Boot device issue mutta jos sinulla on vielä kysyttävää tästä viestistä, kysy heiltä kommenttiosiossa.