When you use an application or play games, and suddenly it freezes, crashes or exit followed by your PC screen going off and then turning back on again. And suddenly you see a pop-up error message saying “Display driver stopped responding and has recovered” or “Display driver nvlddmkm stopped responding and has successfully recovered” with driver info in details. The error is displayed when Timeout Detection and Recovery (TDR) feature of Windows determines that the Graphics Processing Unit (GPU) has not responded within the allowed time frame and have restarted the Windows Display Driver to avoid a full restart.
The main cause of Display driver stopped responding and has recovered error:
- Outdated, corrupted or incompatible Display Driver
- Carte graphique défectueuse
- Overheating Graphics Processing Unit (GPU)
- TDR’s set timeout is less for the GPU to respond
- Too many running programs causing the conflict
These are all the possible causes that can trigger the “Display driver stopped responding and has recovered” error. If you started seeing this error more frequently in your system, it’s a serious issue and needs troubleshooting, but if you see this error once in a year, it’s not a problem, and you can continue to use your PC normally. So without wasting any time, let’s see how to actually fix this error with the below-listed troubleshooting steps.
Le pilote d'affichage a cessé de répondre et a récupéré l'erreur [RESOLU]
Assurez-vous de créer un point de restauration au cas où quelque chose se passerait mal.
Method 1: Uninstall Graphic Card Driver
1. Right-click on your NVIDIA graphic card under device manager and select Désinstaller.
2. If asked for confirmation, select Yes.
3. Appuyez sur la touche Windows + X puis sélectionnez Panneau de configuration.
4. From Control Panel, click on Désinstaller un programme.
5. Suivant, désinstallez tout ce qui concerne Nvidia.
6. Reboot your system to save changes and téléchargez à nouveau la configuration du site Web du fabricant.
5. Once you are sure that you have removed everything, essayez à nouveau d'installer les pilotes. The setup should work without any problems.
Method 2: Update Graphic Card Drivers
1. Appuyez sur la touche Windows + R puis tapez devmgmt.msc and hit enter to open Device Manager.
2. Ensuite, développez Prises d'écran et faites un clic droit sur votre carte graphique Nvidia et sélectionnez Activer.
3. Once, you have done this again, right-click on your graphic card and select “Mettre à jour le logiciel du pilote. »
4. Sélectionnez "Rechercher automatiquement un logiciel de pilote mis à jour» et laissez-le terminer le processus.
5. If the above step could fix your problem, then very good, if not then continue.
6. Again select “Mettre à jour le pilote" mais cette fois sur l'écran suivant sélectionnez "Parcourir mon ordinateur pour le logiciel pilote. »
7. Now. select "Permettez-moi de choisir parmi une liste de pilotes de périphériques sur mon ordinateur. »
8. Finally, select the compatible driver from your Carte graphique Nvidia list and click Next.
9. Let the above process finish and restart your PC to save changes. After updating the Graphic card, you may be able to Fix Display driver stopped responding and has recovered error.
Method 3: Adjust visual effects for better performance
Too many programs, browser windows or games open at the same time can use up a lot of memory and thus cause the above error. To fix this issue, try to close as many programs and windows that are not in use.
Increasing the performance of your system by disabling visual effects can also help to resolve Display driver stopped responding and has recovered error:
1. Right-click on This PC or My Computer and select Propriétés.
2. Puis clique Paramètres système avancés dans le menu de gauche.
Remarque: You could also directly open Advanced system settings by pressing Windows Key + R then type sysdm.cpl et appuyez sur Entrée.
3. Passez à Onglet Avancé if not already there and click Settings under Performance.
4. Now select the checkbox which says “Ajuster pour de meilleures performances. »
5. Cliquez sur Appliquer, suivi de D'ACCORD.
6. Redémarrez votre PC pour enregistrer les modifications.
Method 4: Increase GPU processing time (Registry Fix)
1. Appuyez sur la touche Windows + R puis tapez regedit et appuyez sur Entrée pour ouvrir l'Éditeur du Registre.
2. Accédez à la clé de registre suivante:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlGraphicsDrivers
3. Make sure you have highlighted GrphicsDivers from the left-hand window pane and then right-click in an empty area in the right window pane. Click Nouveauté and then select the following registry value specific to your version of Windows (32 bit or 64 bit):
Pour Windows 32 bits:
une. Sélectionner DWORD (32 bits) et le type TdrDelay as the Name.
b. Double click on TdrDelay and enter 8 in the Value data field and click OK.
Pour Windows 64 bits:
une. Sélectionner QWORD (64-bit) Value et le type TdrDelay as the Name.
b. Double click on TdrDelay and entrez 8 in the Value data field and click OK.
4. Close the Registry Editor and reboot your PC to save changes.
Method 5: Update DirectX to the Latest Version
To Fix Display driver stopped responding and has recovered error, you should always update your DirectX. The best way to make sure you have the latest version installed is to download DirectX Runtime Web Installer from Microsoft’s official website.
Method 6: Make Sure the CPU and GPU are not Overheating
Make sure that the temperature of the CPU and GPU do not exceed the maximum operating temperature. Make sure the heatsink or fan is being used with the processor. Sometimes excessive dust can cause overheating issues, so it’s advised to clean out the vents and graphic card to fix this issue.
Method 7: Set Hardware to Default Settings
An overclocked processor (CPU) or Graphics card can also cause the “Display driver stopped responding and has recovered” error and to resolve this make sure you set the Hardware to default settings. This will ensure that the system is not overclocked and the hardware can function normally.
Method 8: Faulty Hardware
If you’re still unable to fix the above error, then it may be because the graphic card is faulty or damaged. To test your hardware, take it to a local repair shop and let them test your GPU. If it’s faulty or damaged replace with a new one and you will be able to fix the issue once and for all.
Recommandée:
Voilà, vous avez réussi Fix Display driver stopped responding and has recovered error [SOLVED] mais si vous avez encore des questions concernant cet article, n'hésitez pas à les poser dans la section commentaires.