Fix Error code 0x80070035 The network path was not found: In Microsoft Windows sharing the same network allows to access the files and data on each other’s computer without connecting them with the ethernet cable. But sometimes if you are hosting your computer on the network you might see the message saying “Error code: 0x80070035. The network path was not found.”
Well, there are various reason as to why you may be seeing this error code but mainly it is caused due to Antivirus or Firewall blocking the resources. Anyway, without wasting any time let’s see how to actually fix Error code 0x00028001 and error code 0x80070035 The network path was not found with the below-listed troubleshooting guide.
Fix Error code 0x80070035 The network path was not found
Assurez-vous de créer un point de restauration au cas où quelque chose se passerait mal.
Méthode 1 : désactiver temporairement l'antivirus et le pare-feu
1.Cliquez avec le bouton droit sur Icône du programme antivirus dans la barre d'état système et sélectionnez Désactiver
2. Ensuite, sélectionnez la période pour laquelle le L'antivirus restera désactivé.
Remarque : Choisissez la durée la plus courte possible, par exemple 15 minutes ou 30 minutes.
3.Once done, again check if the error resolves or not.
4.Appuyez sur la touche Windows + I puis sélectionnez Panneau de configuration.
5. Ensuite, cliquez sur Système et sécurité.
6. Cliquez ensuite sur Fenêtre pare-feu.
7.Maintenant, dans le volet de gauche de la fenêtre, cliquez sur Activer ou désactiver le pare-feu Windows.
8.Sélectionnez Désactiver le pare-feu Windows et redémarrez votre PC. And see if you’re able to Fix Error code 0x80070035 The network path was not found.
Si la méthode ci-dessus ne fonctionne pas, assurez-vous de suivre exactement les mêmes étapes pour réactiver votre pare-feu.
Method 2: Delete Hidden Network Adapters
1.Appuyez sur la touche Windows + R puis tapez devmgmt.msc et appuyez sur Entrée pour ouvrir Gestionnaire de périphériques.
2.Maintenant, sélectionnez Adaptateurs réseau puis cliquez sur Affichage > Afficher les appareils masqués.
3.Right-click on each of the hidden devices and select Désinstaller l'appareil.
4.Do this for all the hidden devices listed under Network Adapters.
5.Redémarrez votre PC pour enregistrer les modifications.
Method 3: Turn ON Network Discovery
1.Appuyez sur la touche Windows + X puis sélectionnez Panneau de configuration.
2.Now click Network and Internet and then click View network status and tasks.
3.This would take you to Network and Sharing Center, from there click Change Advanced Sharing settings dans le menu de gauche.
4.Check mark Activer la découverte du réseau et cliquez sur Enregistrer les modifications.
5.Redémarrez votre PC pour enregistrer les modifications et voir si vous pouvez Fix Error code 0x80070035 The network path was not found.
Method 4: Enable NetBIOS over TCP/IP
1.Appuyez sur la touche Windows + R puis tapez ncpa.cpl et appuyez sur Entrée.
2.Right-click on your active Wi-Fi or ethernet connection and select Propriétés.
3.Select 4 Internet Protocol Version (TCP / IPv4) et cliquez sur Propriétés.
4.Maintenant, cliquez sur Avancé in the next window and then switch to WINS tab under Advanced TCP/IP Settings.
5.Under NetBIOS setting, check mark “Activer NetBIOS sur TCP / IP“, and then click OK.
6.Reboot your PC to save changes
Method 5: Manually enter all PC’s username and password over the network
1.Appuyez sur la touche Windows + X puis sélectionnez Panneau de configuration.
2.Type Credential in the control panel search and click on Gestionnaire d'informations d'identification.
3.Select Informations d'identification Windows puis cliquez sur Add a Windows credential.
4.One by one type the nom d'utilisateur et mot de passe of each machine connected to the network.
5.Follow this on the PC’s connected to the PC and this will Fix Error code 0x80070035 The network path was not found.
1.Right-click on the drive which you want to be shared and select Propriétés.
2.Passer à Onglet Partage and if under Network Path it says Not Shared then click on Advanced Sharing button.
3.Check mark “Partager ce dossier” and make sure the Share name is correct.
4.Cliquez sur Appliquer puis sur OK.
Method 7: Change Network Security settings
1.Appuyez sur la touche Windows + R puis tapez secpol.msc et appuyez sur Entrée.
2.Navigate to the following path under Local Security Policy window:
Local Policies > Security Options > Network security: LAN Manager authentication level
3.Double-cliquez sur Sécurité réseau : niveau d'authentification LAN Manager in the right-hand side window.
4.Now from the drop-down, choose Send LM & NTLM-use NTLMv2 session security if negotiated.
5.Cliquez sur Appliquer puis sur OK.
Reboot your PC and after the restart see if you are able to Fix Error code 0x80070035 The network path was not found, if not then continue with the next method.
Méthode 8: réinitialiser TCP / IP
1.Right-click on Windows Button and select “Invite de commandes (administrateur)."
2.Now type the following command and press enter after each one:
(a) ipconfig /release
(b) ipconfig /flushdns
(c) ipconfig /renew
3.Again open Admin Command Prompt and type the following and hit enter after each one:
- ipconfig / flushdns
- nbtstat –r
- netsh int ip reset
- netsh winsock reset
4. Redémarrez pour appliquer les modifications.
Recommandé pour vous:
Voilà, vous avez réussi Fix Error code 0x80070035 The network path was not found mais si vous avez encore des questions concernant cet article, n'hésitez pas à les poser dans la section commentaires.